Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[fynxgloire]

Is anyone dual mining ether and decred.
I have some 1070's I like to try this with.
Can anyone help with the script file?
Also anyone with a script file that can help in times of errors thrown by GPU malfunction / restarting, getting 0 hash rates, some way to automatically restart the miner if there is an issue?

This should be useful to you:
https://github.com/aaronsace/MultiPoolMiner/releases/

Thx for link, is this miner similar to the nemos miner?  Which one is better?
I noticed it points to miningpoolhub, is that better than ahashpool?
regards

[aaronsace]

Is anyone dual mining ether and decred.
I have some 1070's I like to try this with.
Can anyone help with the script file?
Also anyone with a script file that can help in times of errors thrown by GPU malfunction / restarting, getting 0 hash rates, some way to automatically restart the miner if there is an issue?

This should be useful to you:
https://github.com/aaronsace/MultiPoolMiner/releases/

Thx for link, is this miner similar to the nemos miner?  Which one is better?
I noticed it points to miningpoolhub, is that better than ahashpool?
regards

They are just copies of an older version of MultiPoolMiner.

MultiPoolMiner works with various pools.

[dawidt]

Hi,
version 10.1 mine fantastic!
Thank You Claymore for this miner.

[Call_Me_Bambi]

Hey guys,
(How) Can I set up Claymore miner to use only certain GPU's?
For example I want to use GPU0 for gaming, while GPU1 and GPU2 will be mining.

Use this switch "-di", from the OP..

-di GPU indexes, default is all available GPUs. For example, if you have four GPUs "-di 02" will enable only first and third GPUs (#0 and #2).

Using your GPU example:

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal YourAddress.YourWorkerName -epsw x -dpool -di 12

This will use GPU1 and GUP2 to mine and not use GPU0 to mine.

[Marcosgarcia999]

I have claymore dual v. 10.1 and RTH+decred. I want to kwon what think us that is best: ETH+Decred? ETH+Sia? ETH+Lbry?
My gpu is only one gtx 1060
Thanks!

[vx0713]

Hey guys,
(How) Can I set up Claymore miner to use only certain GPU's?
For example I want to use GPU0 for gaming, while GPU1 and GPU2 will be mining.

Use this switch "-di", from the OP..

-di GPU indexes, default is all available GPUs. For example, if you have four GPUs "-di 02" will enable only first and third GPUs (#0 and #2).

Using your GPU example:

EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal YourAddress.YourWorkerName -epsw x -dpool -di 12

This will use GPU1 and GUP2 to mine and not use GPU0 to mine.

Thank you so much for the answer! Much appreciated!

[pehoko]

Why v10.1 is much slower than v6.0? In my case this is about 20%.

[JustMan]

Thanks for your work!

[ZUBR64]

Hi.
Its real to support dual keccak+dagger-hashimoto mod?

[TigTex]

I have claymore dual v. 10.1 and RTH+decred. I want to kwon what think us that is best: ETH+Decred? ETH+Sia? ETH+Lbry?
My gpu is only one gtx 1060
Thanks!

Take a look here: https://whattomine.com/calculators

You have calculators for those 3 coins that you said. Test and see what gives you the best profit.
Spoiler: it's eth+decred

[DasBoom]

  Hi there I started using Claymore's v10.1 yesterday,since then my hash rate has remained the same
 but stale shares have trippled.I started with the same settings I used with v10.0 and have tried tweaking
 GPU settings and the like but my stale shares are still tripple that of v10.0. Has anyone else come across this issue?
Should/Can I just use v10.0 instead?

I've noticed the same problem on Clay 10.1, even more than 20% of stale shares with Ethermine eu1.

Rebooting everyday...

I've seen the same, switched to eu2.ethermine.org, and has been fine for last 3 weeks, been getting between 2-5% stale.

Then suddenly it shot up to 15-20% Stale, so switched to us1.ethermine.org, seems to be stable for last 48 hours, back to 3% stale.

  Thanks for the help,I'll give it a try asap and post the result soon good or bad.

  I had no luck switching pools so I have just switched back to v10.0,I'll let it run a few hours hopefully
its the answer.

[fgm]

Hey Claymore, please implement hostname in Ethman instead of ip. It's simpler with   dhcp ip assignment.

[DasBoom]

  Hi there I started using Claymore's v10.1 yesterday,since then my hash rate has remained the same
 but stale shares have trippled.I started with the same settings I used with v10.0 and have tried tweaking
 GPU settings and the like but my stale shares are still tripple that of v10.0. Has anyone else come across this issue?
Should/Can I just use v10.0 instead?

I've noticed the same problem on Clay 10.1, even more than 20% of stale shares with Ethermine eu1.

Rebooting everyday...

I've seen the same, switched to eu2.ethermine.org, and has been fine for last 3 weeks, been getting between 2-5% stale.

Then suddenly it shot up to 15-20% Stale, so switched to us1.ethermine.org, seems to be stable for last 48 hours, back to 3% stale.

  Thanks for the help,I'll give it a try asap and post the result soon good or bad.

  I had no luck switching pools so I have just switched back to v10.0,I'll let it run a few hours hopefully
its the answer.

  I've been running on v10.0 for 9hrs now stale shares instantly returned to an acceptable rate.
I'm mining ethereum only mode for the record. I'm running 2x 1050 ti on this rig does anyone know
if the cause is specifically an nvidia card issue,or a teething trouble with v10.1?

[titan01]

this software can work under Win10? i try to run bat file but seems not work.

[Yohow]

this software can work under Win10? i try to run bat file but seems not work.

Deactivate Antivirus

[leonix007]

this software can work under Win10? i try to run bat file but seems not work.

Yes, its working, post your hardware specs and config to help you out, or any errors seen?

[illanz]

Is Ths normal to have this green GPU recap at every round...??  
Very annoying. Gow can I get rid of it ?

http://illanz.free.fr/eth.jpg

Please someone answer

thanks

[vx0713]

OK, so I have a mixed GPU minning rig, with 3x 1060 and 3x 1070.

Is it OK, to start 2 instances of claymore, one with dual mining on the GTX 1070 and one with solo mining for the 1060s ?

(right now I'm limited by my PSU, and it won't handle 6GPU in dual mining mode)

[tg88]

Is Ths normal to have this green GPU recap at every round...??  
Very annoying. Gow can I get rid of it ?

Please someone answer

thanks

post here your command line to analyze better.

[Tomee]

  Hi there I started using Claymore's v10.1 yesterday,since then my hash rate has remained the same
 but stale shares have trippled.I started with the same settings I used with v10.0 and have tried tweaking
 GPU settings and the like but my stale shares are still tripple that of v10.0. Has anyone else come across this issue?
Should/Can I just use v10.0 instead?

I've noticed the same problem on Clay 10.1, even more than 20% of stale shares with Ethermine eu1.

Rebooting everyday...

I've seen the same, switched to eu2.ethermine.org, and has been fine for last 3 weeks, been getting between 2-5% stale.

Then suddenly it shot up to 15-20% Stale, so switched to us1.ethermine.org, seems to be stable for last 48 hours, back to 3% stale.

  Thanks for the help,I'll give it a try asap and post the result soon good or bad.

  I had no luck switching pools so I have just switched back to v10.0,I'll let it run a few hours hopefully
its the answer.