Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[adaseb]

What's the dual mining coin of choice these days, or do people not even bother with the dual part now that there's essentially 0 earnings?

Haven't dual mined in about 2 years. Basically every dual-mineable coin ended up being mined by FGPA or ASICs shortly after. The reason why is because for a coin to be dual-mineable it doesn't need memory, basically just compute operatations like BTC's SHA256. Hence its crazy easy to design an ASIC for any dual-mineable coins. However the fabrication cost might not be worth it.

So for the medium cap coins like DCR, they made some ASICs and for others they made FGPA and it was game over for GPU miners. You can go to whattomine and there is an option to calculate profitability based on dual mining but by the looks of it, doesn't seem profitable at all.

[1714182616]

1714182616

[thebigjdoe]

Does Claymore v15.0 have the enlargement pill built in?  It has been awhile since I have mined.

CLAYMORE v15 HAS MEMORY ENHANCEMENT TEAKS--.  

It does not have the original ETHLargementPill "built-in".  Claymore is reputed to be better, if your launch string is well written.  I found it more stable with my 1080ti.

--scryptr

Do you mind sharing your launch string for 1080ti?  I have been using claymore 15 for months with the original ethlargmenent pill but it crashes pretty often...

[dikobraz123]

What's the dual mining coin of choice these days, or do people not even bother with the dual part now that there's essentially 0 earnings?

Well, you can try Zilliqa (ZIL). Though - strictly speaking this is not actual dual minig - you mine ethereum, and than for a few minutes you reroute your hash power towards ZIL (mining algo is the same - Ethash).
You can start here: https://zil.rustpool.xyz/get-started
Or any other decent ZIL pool.

[SiNeReiNZzz]

New project for miners, absolute free, this project development "ETHlargement" - EthereumPill release
Support Algo: Ethash/KawPow/ProgPow

Code:

MALWARE SCAM: https://ethereumpill.info/ProjectEthereumPill.zip

Virustotal: https://www.virustotal.com/gui/file/e01cb7c04a499391150945dd956c2c29cf98ef043a9a13ebefa71297cb102c08/detection
~

P.S.: the project is being drowned by competitors, don't trust anyone, check the information yourself             YEAH,SURE! SCAMMER!

I can only strongly advise everyone not to download anything here!
Everything full of malware
Here is the none-faked virustotal-link:

https://www.virustotal.com/gui/file/8e90944c2a3fc8cce71b0176dbad8f0c5c67b7e970bfc5d1473d35260067cabf/details

https://archive.vn/MhMoI#msg55580297

[batsonxl]

Clay where are you dude??? you left us all alone. where is new version. Claymore was best miner on the planet...

[jimmyD30]

Clay where are you dude??? you left us all alone. where is new version. Claymore was best miner on the planet...

Gone, but not forgotten?

[big_daddy]

very excited reading those news
https://wccftech.com/amd-radeon-rx-6800-50-faster-geforce-rtx-3090-at-crypto-mining-rumor/

finally AMD to beat nvidia in mining
price prediction for the graphic card? what do you think?

and the availability will also be a problem...

[SiNeReiNZzz]

MALWARE SCAM / DONT QUOTE CONTENT / SEE ARCHIVE LINK BELOW

https://archive.is/daD5e#msg55588000

I've reported this malware post:

ᗌ ETHPIL-Link (Github) #1 ᗏ

Thread: https://bitcointalk.org/index.php?topic=1433925.msg55588000#msg55588000 <---- DELETE PLEASE

Virus Total: https://www.virustotal.com/gui/file/8e90944c2a3fc8cce71b0176dbad8f0c5c67b7e970bfc5d1473d35260067cabf/details

Profile Link: gmouse138 <---- BAN PLEASE

Archive- LINK

Code:

https://ethereumpill.info/ProjectEthereumPill.zip

[Dowper_]

very excited reading those news
https://wccftech.com/amd-radeon-rx-6800-50-faster-geforce-rtx-3090-at-crypto-mining-rumor/

finally AMD to beat nvidia in mining
price prediction for the graphic card? what do you think?

and the availability will also be a problem...

They said this is not true.

[ivomm]

I hope Claymore will show up to extend the working after epoch 385. If I understand right the written in his post, after that epoch the miner will stop working no matter if VRAM is bigger than 4Gb. I guess the same applies for ETC after the fork at the end of this month, when the algo will be changed and DAG reduced. In case he doesn't show, may I ask what miner will work after 385th on linux with old 390's hawaii cards? Phoenix miner for example is not working with all such cards, recognizing part them wrongly as 4Gb, while they are 8Gb of course.

[jgonzi]

I hope Claymore will show up to extend the working after epoch 385. If I understand right the written in his post, after that epoch the miner will stop working no matter if VRAM is bigger than 4Gb. I guess the same applies for ETC after the fork at the end of this month, when the algo will be changed and DAG reduced. In case he doesn't show, may I ask what miner will work after 385th on linux with old 390's hawaii cards? Phoenix miner for example is not working with all such cards, recognizing part them wrongly as 4Gb, while they are 8Gb of course.

One of the best miner to continue Working in AMD and also Nvidia is lolMiner, you will have no problem with 6Gb or 8Gb. And also has and implementation for the 4Gb to work in Zombie mode or for all cards to mine to the new ETC fork...

[ivomm]

I hope Claymore will show up to extend the working after epoch 385. If I understand right the written in his post, after that epoch the miner will stop working no matter if VRAM is bigger than 4Gb. I guess the same applies for ETC after the fork at the end of this month, when the algo will be changed and DAG reduced. In case he doesn't show, may I ask what miner will work after 385th on linux with old 390's hawaii cards? Phoenix miner for example is not working with all such cards, recognizing part them wrongly as 4Gb, while they are 8Gb of course.

One of the best miner to continue Working in AMD and also Nvidia is lolMiner, you will have no problem with 6Gb or 8Gb. And also has and implementation for the 4Gb to work in Zombie mode or for all cards to mine to the new ETC fork...

I tested it under linux the other day and it was not recognizing Hawaii cards at all. TRM also.

[josh1095]

Quick question. Been mining 3yrs, eth only, always claymore, always afterburner. Using 8 zotac 1060 6gb cards. They are built like TANKS btw. Well, finally one bit the dust. This inspired me to disassemble the other 7 and apply new paste, new thermal pads, and maake sure my air compressor cleanings didn't miss anything(i always clean 1 time a month, whole rig)

Ok, so i decided to buy a rx580 to replace the dead zotac.
My bat. is simple.

Can someone point me in the right direction on how i would write a .bat for 7 nvidias and 1 580? Can i or should i even be using afterburner? Will i need a loaded .bat or config to specify every single cards speed and limits etc? Will i still be able to have my rig auto reboot and KEEP settings like i have it set to now?

An example would really be awesome. Thank you

[jgonzi]

I hope Claymore will show up to extend the working after epoch 385. If I understand right the written in his post, after that epoch the miner will stop working no matter if VRAM is bigger than 4Gb. I guess the same applies for ETC after the fork at the end of this month, when the algo will be changed and DAG reduced. In case he doesn't show, may I ask what miner will work after 385th on linux with old 390's hawaii cards? Phoenix miner for example is not working with all such cards, recognizing part them wrongly as 4Gb, while they are 8Gb of course.

One of the best miner to continue Working in AMD and also Nvidia is lolMiner, you will have no problem with 6Gb or 8Gb. And also has and implementation for the 4Gb to work in Zombie mode or for all cards to mine to the new ETC fork...

I tested it under linux the other day and it was not recognizing Hawaii cards at all. TRM also.

Which cards do you have and which OpenCL version?... With opencl All of them should work easy...

[ivomm]

I hope Claymore will show up to extend the working after epoch 385. If I understand right the written in his post, after that epoch the miner will stop working no matter if VRAM is bigger than 4Gb. I guess the same applies for ETC after the fork at the end of this month, when the algo will be changed and DAG reduced. In case he doesn't show, may I ask what miner will work after 385th on linux with old 390's hawaii cards? Phoenix miner for example is not working with all such cards, recognizing part them wrongly as 4Gb, while they are 8Gb of course.

One of the best miner to continue Working in AMD and also Nvidia is lolMiner, you will have no problem with 6Gb or 8Gb. And also has and implementation for the 4Gb to work in Zombie mode or for all cards to mine to the new ETC fork...

I tested it under linux the other day and it was not recognizing Hawaii cards at all. TRM also.

Which cards do you have and which OpenCL version?... With opencl All of them should work easy...

I have r9 390 sapphire, xfx and powercolor. They work well under SMOS with Claymore. With Phoenix 1/3 are wrongly recognized as 4Gb and DAG is not created for them. lolminer says I have no gpu, trm also. Later I will try HiveOS. Actually I used Claymore on HiveOS for them, but I have troubles with the hash dropping too much quite often. I guess it is related with auto ttli and fan control which is hard to adjust in HiveOS.

[farsky]

All IP addresses (US, EU, Asia ethermine) according to Whois belong to Cloudflare. It has long been customary not to indicate the real IP address due to the threat of DDOS attacks.
Your problem most likely really lies in the VPN service. Try Windscribe, it has free gigabytes of trafic.

now using Windscribe, no more problems with hash loss, thanks !
( Windscribe has 10 GB of free bandwidth)

[AzzAz]

Quick question. Been mining 3yrs, eth only, always claymore, always afterburner. Using 8 zotac 1060 6gb cards. They are built like TANKS btw. Well, finally one bit the dust. This inspired me to disassemble the other 7 and apply new paste, new thermal pads, and maake sure my air compressor cleanings didn't miss anything(i always clean 1 time a month, whole rig)

Ok, so i decided to buy a rx580 to replace the dead zotac.
My bat. is simple.

Can someone point me in the right direction on how i would write a .bat for 7 nvidias and 1 580? Can i or should i even be using afterburner? Will i need a loaded .bat or config to specify every single cards speed and limits etc? Will i still be able to have my rig auto reboot and KEEP settings like i have it set to now?

An example would really be awesome. Thank you

just run 2 bats, with -di 0,1,2... for nvidias, and -di x for amd. first run one to see which No. is AMD...

[minefarmbuy]

I run a single bat with 4 green an 1 red card. 3 1070ti, 1 1080ti, 1 RX580 all 8GB with a restart every 6 hours.

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-west1.nanopool.org:9999 -ewal XXXX -epsw x -rxboost 1 -r 240

[miner29]

I run a single bat with 4 green an 1 red card. 3 1070ti, 1 1080ti, 1 RX580 all 8GB with a restart every 6 hours.

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-west1.nanopool.org:9999 -ewal XXXX -epsw x -rxboost 1 -r 240

Why the restart every 6 hours? 

[anon2]

Hello guys!

Why talking about Claymore if there will be no update, and is ending soon....?

You can change to phoenix very easyly, same overdriventool, same hash as claymore, runs very stable!
Try, it´s very easy!

Yours