Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Metroid]

hi everybody i have a problem and need your help
 
first i noticed that this problem happen only when using a Gigabyte motherboard and others is ok

the problem is when no display is connected to the motherboard and windows and miner is running ok if the power go down and return the system boots and miner begins till it define the gpu in miner console then it pause and doesnot mine till i plug a display in the motherboard it resume mining without any problem
this is too wired because it means i need a display for every gigabyte motherboard
please advise

First set to high performance on power options, in control panel, disable sleep on displays in there too if not then try to reinstall windows.

on another note, I have 12 GTX 690, what can I mine with it? (electricity costs doesn't matter).

They are 2gb of video memory right? I think nothing profitable can be mined using it, I might be wrong though, you can always mine bitcoin with it, might hit the lottery if you find a block.

[1715556509]

1715556509

[1715556509]

1715556509

[Apprentice]

on another note, I have 12 GTX 690, what can I mine with it? (electricity costs doesn't matter).

They are 2gb of video memory right? I think nothing profitable can be mined using it, I might be wrong though, you can always mine bitcoin with it, might hit the lottery if you find a block.
[/quote]

No, it's 4Gb cards

[Metroid]

No, it's 4Gb cards

It must be 2 gpus with 2gb each, if it works as 4gb then I think the best algo will be ravencoin at moment.

[Dowper_]

My ETH results with MSI GamingX 5600XT:

https://www.youtube.com/watch?v=pbvo_ozprnw

[Joz76]

hi everybody i have a problem and need your help
 
first i noticed that this problem happen only when using a Gigabyte motherboard and others is ok

the problem is when no display is connected to the motherboard and windows and miner is running ok if the power go down and return the system boots and miner begins till it define the gpu in miner console then it pause and doesnot mine till i plug a display in the motherboard it resume mining without any problem
this is too wired because it means i need a display for every gigabyte motherboard
please advise

You need a HDMI dummy plug, like these:
https://www.amazon.com/Display-Emulator-Headless-display-1920x1080/dp/B079K3CQRT

I have Gigabyte mainboard also, and i have the problem like you. The dummy plug is the cheap solution.

[commandera]

stuck here can't start
https://imgur.com/a/qzA1NN8

[Metroid]

stuck here can't start
https://imgur.com/a/qzA1NN8

one of your gpus is causing the issue, you need to remove each to know which one is the cause, or you can create each claymore instance for each gpu, the one that gets stuck is the problematic. it can be a lot of work, good luck.

[abaiti]

stuck here can't start
https://imgur.com/a/qzA1NN8

one of your gpus is causing the issue, you need to remove each to know which one is the cause, or you can create each claymore instance for each gpu, the one that gets stuck is the problematic. it can be a lot of work, good luck.

got ahead of me with advice. Already wanted to write the same thing.

[krlosdark]

4gb rx card stop working today in all my rigs, someone have this problem? and how to fix..

[patthara74]

4gb rx card stop working today in all my rigs, someone have this problem? and how to fix..

me too but not all rig

[bategojko74]

4gb rx card stop working today in all my rigs, someone have this problem? and how to fix..

me too but not all rig

Use PhoenixMiner

[patthara74]

4gb rx card stop working today in all my rigs, someone have this problem? and how to fix..

me too but not all rig

Use PhoenixMiner

I try but it show error and popup close program. I had try 2rigs same result

[rusman123]

linux is ok

[bategojko74]

linux is ok

Until 253 epoch

[bategojko74]

4gb rx card stop working today in all my rigs, someone have this problem? and how to fix..

me too but not all rig

Use PhoenixMiner

I try but it show error and popup close program. I had try 2rigs same result

Some of your Claymore parameters are not the same in PM. Run PM from command prompt and you will see the wrong parameters.

[patthara74]

4gb rx card stop working today in all my rigs, someone have this problem? and how to fix..

me too but not all rig

Use PhoenixMiner

I try but it show error and popup close program. I had try 2rigs same result

Some of your Claymore parameters are not the same in PM. Run PM from command prompt and you will see the wrong parameters.

I try t run almost without extra parameter(I used pheonix in my 5700rig) but tis hsow stop working after start to received job from pool.

PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x40455f7e79561a01091a66260360c4361e4c3525.Rig001 -log 0 -hstats 2

[bategojko74]

4gb rx card stop working today in all my rigs, someone have this problem? and how to fix..

me too but not all rig

Use PhoenixMiner

I try but it show error and popup close program. I had try 2rigs same result

Some of your Claymore parameters are not the same in PM. Run PM from command prompt and you will see the wrong parameters.

I try t run almost without extra parameter(I used pheonix in my 5700rig) but tis hsow stop working after start to received job from pool.

PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x40455f7e79561a01091a66260360c4361e4c3525.Rig001 -log 0 -hstats 2

Post a log, PM version and driver version.

[Piskeante]

I also have issues with RX 580 4gb cards today. They suddenly stopped working. They don't seem to be able to deal with the DAG file. Any solution??

[0xAA]

-eres 1 is the solution for now

[adwike]

I still hope that the author will return or make an update. Why throw such a mass product?