Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[yoriccc]

Hi all...Can you pls help me? my hash rate is too low 11 mh, it has to be 26 mh etc..

3 drivers installed with dd driver uninstaller
first 17.11.4 crimson
second 2020 20.8.1 adrenalin
now 18.5.1 still same 11 mh

System
windows 10 64 bit 10.0, build 19041
12 GB ram
RX580 8 GB
virtual memory 36000

https://www.hostpic.org/images/2008131501120106.jpg

https://www.hostpic.org/images/2008131501120105.jpg

thx guys issue solved...I installed the blockchain driver and now it is 28 mh/s

[xeridea]

ETHpillan - a new tablet to increase the hashrate on video cards from AMD and NVIDIA
Support all miners for Wondows (AMD+Nvidia)
Hashrate
1080ti - 55 mh/s
2080ti - 58 mh/s
RX5700 XT - 65 mh/s

More info: LINK DELETED!!

SCAM WARNING!!!

[Lafu]

ETHpillan - a new tablet to increase the hashrate on video cards from AMD and NVIDIA
Support all miners for Wondows (AMD+Nvidia)
Hashrate
1080ti - 55 mh/s
2080ti - 58 mh/s
RX5700 XT - 65 mh/s

SCAM WARNING!!!

Can you please edit your post where you quoted the post and delete the link in there , so nobody can click on it !

You can read more about that here in my thread https://bitcointalk.org/index.php?topic=5182222.msg54986094#msg54986094

Regards Lafu

[adaseb]

Is there a guide anywhere to get 4GB cards to mine with Ubuntu 16.04? Basically I am having issues to get Ubuntu to load if "onboard" video is selected. It refuses to go past the login screen. If I have "PCIe" as primary video on motherboard, it loads but it runs of the VRAM on that GPU. Seems the only drivers I can use are 17.40 for Ubuntu 16.04.

[DrX]

Is there a guide anywhere to get 4GB cards to mine with Ubuntu 16.04? Basically I am having issues to get Ubuntu to load if "onboard" video is selected. It refuses to go past the login screen. If I have "PCIe" as primary video on motherboard, it loads but it runs of the VRAM on that GPU. Seems the only drivers I can use are 17.40 for Ubuntu 16.04.

I'm trying to get 4GB card working on Ubuntu 20.04.1, Installed pro drivers 20.30 and got it to mine EXP but the ETH is cant generate DAG, help would be nice

I have booted to terminal but still not enough memory.

[alucard20724]

ETHpillan - a new tablet to increase the hashrate on video cards from AMD and NVIDIA
Support all miners for Windows (AMD+Nvidia)
Hashrate
1080ti - 55 mh/s
2080ti - 58 mh/s
RX5700 XT - 65 mh/s

More info: https_://github.com/pillforeth/ETHpillAN/releases/tag/1.1.0

SCAM

this link has already been reported and removed above.


you can find more information about the scam here https://bitcointalk.org/index.php?topic=5182222.msg54942970#msg54942970

[impynick]

Im getting error 1002 when trying to apply straps to 1070ti

windows 10, it mines fine but will not apply memory straps.

"Failed to install driver, error 1002"

[adaseb]

Is there a guide anywhere to get 4GB cards to mine with Ubuntu 16.04? Basically I am having issues to get Ubuntu to load if "onboard" video is selected. It refuses to go past the login screen. If I have "PCIe" as primary video on motherboard, it loads but it runs of the VRAM on that GPU. Seems the only drivers I can use are 17.40 for Ubuntu 16.04.

I'm trying to get 4GB card working on Ubuntu 20.04.1, Installed pro drivers 20.30 and got it to mine EXP but the ETH is cant generate DAG, help would be nice

I have booted to terminal but still not enough memory.

I got it to work with Ubuntu 16.04, using 17.40 AMD drivers. It mines ETH except can't figure out how to undervolt. This is with Phoenix miner, Claymore doesn't seem to want to work.

Any way to get Claymore to work in Ubuntu with 4GB?

[DrX]

Is there a guide anywhere to get 4GB cards to mine with Ubuntu 16.04? Basically I am having issues to get Ubuntu to load if "onboard" video is selected. It refuses to go past the login screen. If I have "PCIe" as primary video on motherboard, it loads but it runs of the VRAM on that GPU. Seems the only drivers I can use are 17.40 for Ubuntu 16.04.

I'm trying to get 4GB card working on Ubuntu 20.04.1, Installed pro drivers 20.30 and got it to mine EXP but the ETH is cant generate DAG, help would be nice

I have booted to terminal but still not enough memory.

I got it to work with Ubuntu 16.04, using 17.40 AMD drivers. It mines ETH except can't figure out how to undervolt. This is with Phoenix miner, Claymore doesn't seem to want to work.

Any way to get Claymore to work in Ubuntu with 4GB?

Ok, Got it to work with TeamRedMiner. Could not het Claymore and Phoenix Miner go over epoch 350 on my setup (Ubuntu 20.04.1 and Pro drivers 20.30), Now RX470 4G is mining 27,5 Mh/s,
Next i have to look at the power consumption, its little bit too high now...

[andreysmi]

Has anybody managed to get integrated graphics to work in Linux? I just get the blank screen with a cursor. Booting with "nomodeset" works but then there's no compute drivers as well. This is only a temporary fix to install/uninstall drivers but there's already the compute drivers installed.

1. disable integrated video in bios
2. boot on PCE video
3. install drivers on PCE video
4. reboot
5. if everything works reboot again
6. enable integrated video in bios
7. boot on integrated video

it should work this way

[xeridea]

Im getting error 1002 when trying to apply straps to 1070ti

windows 10, it mines fine but will not apply memory straps.

"Failed to install driver, error 1002"

Try running as administrator. If still not work uninstall and reinstall driver (See OP for details)

[jasta more]

ETHpillan - a new tablet to increase the hashrate on video cards from AMD and NVIDIA
Support all miners for Windows (AMD+Nvidia)
Hashrate
1080ti - 55 mh/s
2080ti - 58 mh/s
RX5700 XT - 65 mh/s

More info:

Again with same scam but different account, don't download this people if you want to keep your funds

[Lafu]

@jasta more

Can you please edit the quoted post you have done and make the link unclickable or delete it !
Just to be sure nobody click on it and download this Shit what they have posted and that they dont get infected with bad software.
Would be great.

Regards Lafu

[impynick]

Im getting error 1002 when trying to apply straps to 1070ti

windows 10, it mines fine but will not apply memory straps.

"Failed to install driver, error 1002"

Try running as administrator. If still not work uninstall and reinstall driver (See OP for details)

I DDU'd and reinstalled. Seems like it thinks the service is in use. Anyway I can delete the -mt driver itself?

Running it as admin as well.

[vuli1]

I have  strange issue. After some time I run ETh miner on 570 4GB and 580 8Gb cards using 20.8.1
The problem is 580 is mining @∟29Mhs, 570 @ 2.6Mhs.
Both cards are set to compute. Anyone have any idea?

[sk0mi]

Hello,
I need a little help with a batch file.

How should my batch file look if I wanted to disable some number of cards after starting a miner?

For example, I start miner with batch file and I need to disable GPU 1 and GPU 4 right after starting a miner.
How can I do that with a batch file?

Now my rig starts up with normal batch file for starting a miner and after that I just type 1 and 4 manually and cards are disabled.
Can cards be disabled directly from batch, and enabled later manually?

*Sometimes I forget to disable cards and it makes a problem with some of my work, for which I need those two cards, that’s why I need miner to start with those cards disabled, and when I finish with them I would enable them back manually typing 1 and 4.

Thank you in advance

[vuli1]

-di    GPU indexes, default is all available GPUs. For example, if you have four GPUs "-di 02" will enable only first and third GPUs (#0 and #2).
   You can also turn on/off cards in runtime with "0"..."9" keys and check current statistics with "s" key.
   For systems with more than 10 GPUs: use letters to specify indexes more than 9, for example, "a" means index 10, "b" means index 11, etc; also "a", "b", and "c" keys allow you to turn on/off GPU #10, #11 and #12 in runtime.

[vuli1]

I have  strange issue. After some time I run ETh miner on 570 4GB and 580 8Gb cards using 20.8.1
The problem is 580 is mining @∟29Mhs, 570 @ 2.6Mhs.
Both cards are set to compute. Anyone have any idea?

hja, i looks it is a 4GB problem, with DAG 351 is working at full hash, after 351, so 352 and fwd it gets down to 2.6mhs. So game over for 4GB cards.

[jasta more]

@jasta more

Can you please edit the quoted post you have done and make the link unclickable or delete it !
Just to be sure nobody click on it and download this Shit what they have posted and that they dont get infected with bad software.
Would be great.

Regards Lafu

Fixed, thanks for pointing to my mistake

[Metroid]

..

You scammers posting that trojan horse should be banned from here.