br2459
|
|
December 31, 2020, 04:24:05 PM |
|
Tried to mine, but always getting 13:08:12:540 1288 Setting DAG epoch #385 for GPU0 13:08:12:540 1288 Create GPU buffer for GPU0 13:08:12:548 1288 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
4GB video ram, 8 gb ram, 32 gb virtual memory isnt enough?
If I am not mistaken, the fix is to allow cards with 6GB or 8GB to continue using Claymore's miner. ETH dag is larger than 4GB now so 4GB cards still won't work.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3808
Merit: 1723
|
|
December 31, 2020, 08:33:20 PM |
|
You can still mine with 4GB cards with a special miner software called lolminer. It has a method to somehow mine even if the DAG is larger than 4GB. Sounds amazing doesn’t it? Yes but there are a few issues.
One of them is that every new DAG the speed slows down by a large margin while consumption remains the same. The first DAG where Phoenix miner stopped working for me, I got 28.5mhs from my regular 29.5mhs. Now a few dags later and it’s down to 22mhs. Basically every dag it slows down by 1mhs or so. So good for maybe another month and then time to upgrade the GPUs.
|
|
|
|
maxfunky
|
|
December 31, 2020, 10:35:05 PM |
|
You can still mine with 4GB cards with a special miner software called lolminer. It has a method to somehow mine even if the DAG is larger than 4GB. Sounds amazing doesn’t it? Yes but there are a few issues.
One of them is that every new DAG the speed slows down by a large margin while consumption remains the same. The first DAG where Phoenix miner stopped working for me, I got 28.5mhs from my regular 29.5mhs. Now a few dags later and it’s down to 22mhs. Basically every dag it slows down by 1mhs or so. So good for maybe another month and then time to upgrade the GPUs.
Phoenix miner too is now working with 4GB (similar to lolminer) I run it on linux with my old 4GB cards.
|
|
|
|
Just_a_miner
Jr. Member
Offline
Activity: 325
Merit: 2
|
|
January 01, 2021, 07:01:56 AM |
|
Claymore Dev is not dead just changed its name to Phoenix Dev It's just the same person just a different name I guess Best wishes for 2021 people ....
that's a quite funny guess if you'll take this into account - https://bitcointalk.org/index.php?topic=2647654.msg31316061#msg31316061
|
More Epochs Mod of Claymore ETH Miner v15: Epochs 385+ works now! https://bitcointalk.org/index.php?topic=5305046
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
January 02, 2021, 08:49:37 AM |
|
Phoenix miner too is now working with 4GB (similar to lolminer) I run it on linux with my old 4GB cards.
no it isn't on windows. Out of memory, 4.02 gbytes allocation... In Windows lolMiner is working, and you have the bat file to use It... The speed each Epoch will get reduced in All miners but you are still able to mine ETH with 4Gb in Windows
|
|
|
|
STT
Legendary
Offline
Activity: 3962
Merit: 1424
Leading Crypto Sports Betting & Casino Platform
|
|
January 02, 2021, 06:55:50 PM |
|
Ok just to summarize, so the latest Claymore release was a while ago and the easiest route here is just use gminer release 3 days old though some others will work also. For the moment claymore itself needs an update. I'll have a look at the epochs mod also from this vid - https://vimeo.com/495752694I guess its already known but I have 36gig commit, 16gb physical and 8gb on the card and either way it does require an update afaik
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
miner29
|
|
January 02, 2021, 07:41:08 PM |
|
Phoenix miner too is now working with 4GB (similar to lolminer) I run it on linux with my old 4GB cards.
no it isn't on windows. Out of memory, 4.02 gbytes allocation... In Windows lolMiner is working, and you have the bat file to use It... The speed each Epoch will get reduced in All miners but you are still able to mine ETH with 4Gb in Windows no, it isn't Done (3533 ms), size of new DAG: 4104 MByte ------------------------------------------------------- GPU 0: insufficient memory for DAG epoch 385. no matter what is set in --4g-alloc-size no effect. My 44 570s-4gb are still working at 24mhs on linux. If its not working on your end...keep working on it. In fact just spun up an old 550-4gb card...its running at 11mhs. Ill let them run until they cross the next best coin which right now means 12mhs is switch over point for me.
|
|
|
|
|
madnessteat
Legendary
Offline
Activity: 2296
Merit: 2059
|
|
January 05, 2021, 10:41:17 AM |
|
Guys, tell me what the problem is and if there is already an official solution? Miner version 15, pool nanopool. When I start the miner, I get an error " Pool sent wrong data, cannot set epoch". GPUs - GTX 1070 8 GB with the latest drivers installed.
|
| . .Duelbits. | │ | | │ | ▄▄█▄▄░░▄▄█▄▄░░▄▄█▄▄ ███░░░░███░░░░███ ▀░░░▀░░▀░░░▀░░▀░░░▀ ▄░░░░░░░░░░░░ ▀██████████ ░░░░░███░░░░▀ ░░█░░░███▄█░░░█ ░░██▌░░███░▀░░██▌ ░█░██░░███░░░█░██ ░█▀▀▀█▌░███░░█▀▀▀█▌ ▄█▄░░░██▄███▄█▄░░▄██▄ ▄███▄ ░░░░▀██▄▀ | . REGIONAL SPONSOR | | ███▀██▀███▀█▀▀▀▀██▀▀▀██ ██░▀░██░█░███░▀██░███▄█ █▄███▄██▄████▄████▄▄▄██ ██▀ ▀███▀▀░▀██▀▀▀██████ ███▄███░▄▀██████▀█▀█▀▀█ ████▀▀██▄▀█████▄█▀███▄█ ███▄▄▄████████▄█▄▀█████ ███▀▀▀████████████▄▀███ ███▄░▄█▀▀▀██████▀▀▀▄███ ███████▄██▄▌████▀▀█████ ▀██▄███▀██▄█▄▄▄██▄████▀ ▀▀██████████▄▄███▀▀ ▀▀▀▀█▀▀▀▀ | . EUROPEAN BETTING PARTNER | |
|
|
|
percy_tc
|
|
January 05, 2021, 11:42:15 AM Merited by madnessteat (1) |
|
Guys, tell me what the problem is and if there is already an official solution? Miner version 15, pool nanopool. When I start the miner, I get an error " Pool sent wrong data, cannot set epoch". GPUs - GTX 1070 8 GB with the latest drivers installed. Claymore is outdated, please use Phoenixminer or other up to date ETH miner software.
|
|
|
|
Just_a_miner
Jr. Member
Offline
Activity: 325
Merit: 2
|
|
January 05, 2021, 11:58:11 AM Merited by madnessteat (1) |
|
Guys, tell me what the problem is and if there is already an official solution? Miner version 15, pool nanopool. When I start the miner, I get an error " Pool sent wrong data, cannot set epoch". GPUs - GTX 1070 8 GB with the latest drivers installed. Default Claymore ETH Miner v15.0 only supports up to 384 DAG epoch, and the miner stopped working already. You can use my More Epochs mod for Claymore miner, check https://bitcointalk.org/index.php?topic=5305046.0, the mod adds support of DAG epochs up to 500 so you can continue to use legendary Claymore ETH miner!
|
More Epochs Mod of Claymore ETH Miner v15: Epochs 385+ works now! https://bitcointalk.org/index.php?topic=5305046
|
|
|
madnessteat
Legendary
Offline
Activity: 2296
Merit: 2059
|
|
January 05, 2021, 02:13:45 PM |
|
percy_tc, Just_a_miner Thanks guys. Had to turn off mining for 10 days due to the need to move around the country during the holidays. When I returned home, I was very surprised by this situation. Now I will have to use phoenix-miner.
|
| . .Duelbits. | │ | | │ | ▄▄█▄▄░░▄▄█▄▄░░▄▄█▄▄ ███░░░░███░░░░███ ▀░░░▀░░▀░░░▀░░▀░░░▀ ▄░░░░░░░░░░░░ ▀██████████ ░░░░░███░░░░▀ ░░█░░░███▄█░░░█ ░░██▌░░███░▀░░██▌ ░█░██░░███░░░█░██ ░█▀▀▀█▌░███░░█▀▀▀█▌ ▄█▄░░░██▄███▄█▄░░▄██▄ ▄███▄ ░░░░▀██▄▀ | . REGIONAL SPONSOR | | ███▀██▀███▀█▀▀▀▀██▀▀▀██ ██░▀░██░█░███░▀██░███▄█ █▄███▄██▄████▄████▄▄▄██ ██▀ ▀███▀▀░▀██▀▀▀██████ ███▄███░▄▀██████▀█▀█▀▀█ ████▀▀██▄▀█████▄█▀███▄█ ███▄▄▄████████▄█▄▀█████ ███▀▀▀████████████▄▀███ ███▄░▄█▀▀▀██████▀▀▀▄███ ███████▄██▄▌████▀▀█████ ▀██▄███▀██▄█▄▄▄██▄████▀ ▀▀██████████▄▄███▀▀ ▀▀▀▀█▀▀▀▀ | . EUROPEAN BETTING PARTNER | |
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
January 05, 2021, 02:30:24 PM |
|
Guys, tell me what the problem is and if there is already an official solution? Miner version 15, pool nanopool. When I start the miner, I get an error " Pool sent wrong data, cannot set epoch". GPUs - GTX 1070 8 GB with the latest drivers installed. Claymore is outdated, please use Phoenixminer or other up to date ETH miner software. Completely true... there are lot of options for Mix Rigs... or for specific... for Mix Rigs with lolMiner the improves in Watts is really good...
|
|
|
|
miner29
|
|
January 05, 2021, 02:50:19 PM |
|
Guys, tell me what the problem is and if there is already an official solution? Miner version 15, pool nanopool. When I start the miner, I get an error " Pool sent wrong data, cannot set epoch". GPUs - GTX 1070 8 GB with the latest drivers installed. Claymore is outdated, please use Phoenixminer or other up to date ETH miner software. Completely true... there are lot of options for Mix Rigs... or for specific... for Mix Rigs with lolMiner the improves in Watts is really good... Plus better to support active devs of mining software then to support somebody leaching off claymores work. So TRM / PM / LOL / Gminer / Nbminer all better to support. They support the mining community. Also note i havent lost any speed since moving off Claymore...all the miner devs have stepped up thier game.
|
|
|
|
DrX
Member
Offline
Activity: 233
Merit: 20
|
|
January 05, 2021, 05:16:57 PM |
|
If you want to continue using only claymore straps and rxboost, you can use this bat file You just have to download PStools from https://docs.microsoft.com/en-us/sysinternals/downloads/pssuspendjust adjust the runforseconds to pause after claymore has added straps and rxboost @echo off echo ------------------------------------------------------------------- echo Simple script to use Claymores rxboost And straps By DrX echo ------------------------------------------------------------------- echo: set executable=EthDcrMiner64.exe set executable2= MINER.EXE set commandline= -dbg -1 -mport -0 -benchmark 1 -strap 1 -rxboost 1 set commandline2= MINER COMMANDS set runforseconds=20 set restartinseconds=10 set /a counter=0 timeout %restartinseconds% set GPU_MAX_ALLOC_PERCENT 100 set GPU_USE_SYNC_OBJECTS 1 set GPU_MAX_HEAP_SIZE 100 :start start "Miner Window" %executable% %commandline% echo: echo The software will run for %runforseconds% seconds timeout %runforseconds% pssuspend.exe %executable% start "Miner Window" %executable2% %commandline2% pause
|
|
|
|
miner29
|
|
January 05, 2021, 05:39:02 PM |
|
If you want to continue using only claymore straps and rxboost, you can use this bat file You just have to download PStools from https://docs.microsoft.com/en-us/sysinternals/downloads/pssuspendjust adjust the runforseconds to pause after claymore has added straps and rxboost @echo off echo ------------------------------------------------------------------- echo Simple script to use Claymores rxboost And straps By DrX echo ------------------------------------------------------------------- echo: set executable=EthDcrMiner64.exe set executable2= MINER.EXE set commandline= -dbg -1 -mport -0 -benchmark 1 -strap 1 -rxboost 1 set commandline2= MINER COMMANDS set runforseconds=20 set restartinseconds=10 set /a counter=0 timeout %restartinseconds% set GPU_MAX_ALLOC_PERCENT 100 set GPU_USE_SYNC_OBJECTS 1 set GPU_MAX_HEAP_SIZE 100 :start start "Miner Window" %executable% %commandline% echo: echo The software will run for %runforseconds% seconds timeout %runforseconds% pssuspend.exe %executable% start "Miner Window" %executable2% %commandline2% pause
DrX thanks thats a much better solution than running code from unknown source. Like i said i dont run Claymore anymore but for those that simply cant let go...this is the best solution ive seen for both earnings for the miner and for security of their rigs.
|
|
|
|
Mattthev
|
|
January 06, 2021, 05:19:26 PM |
|
Claymore Dev is not dead just changed its name to Phoenix Dev It's just the same person just a different name I guess Best wishes for 2021 people ....
I don't think so. Years ago Claymore and somebody from Phoenixminer was arguing on Bitcointalk and accusing each other from copying kernels. We still maintain and develop PBE and it supports most of the Polaris cards. Download from Github or build from source code. https://github.com/IndeedMiners/PolarisBiosEditor/releases
|
|
|
|
clixo
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 07, 2021, 08:54:00 AM |
|
If you want to continue using only claymore straps and rxboost, you can use this bat file You just have to download PStools from https://docs.microsoft.com/en-us/sysinternals/downloads/pssuspendjust adjust the runforseconds to pause after claymore has added straps and rxboost @echo off echo ------------------------------------------------------------------- echo Simple script to use Claymores rxboost And straps By DrX echo ------------------------------------------------------------------- echo: set executable=EthDcrMiner64.exe set executable2= MINER.EXE set commandline= -dbg -1 -mport -0 -benchmark 1 -strap 1 -rxboost 1 set commandline2= MINER COMMANDS set runforseconds=20 set restartinseconds=10 set /a counter=0 timeout %restartinseconds% set GPU_MAX_ALLOC_PERCENT 100 set GPU_USE_SYNC_OBJECTS 1 set GPU_MAX_HEAP_SIZE 100 :start start "Miner Window" %executable% %commandline% echo: echo The software will run for %runforseconds% seconds timeout %runforseconds% pssuspend.exe %executable% start "Miner Window" %executable2% %commandline2% pause
DrX thanks thats a much better solution than running code from unknown source. Like i said i dont run Claymore anymore but for those that simply cant let go...this is the best solution ive seen for both earnings for the miner and for security of their rigs. Thank You !
|
|
|
|
tankuu
Newbie
Offline
Activity: 1
Merit: 0
|
|
January 07, 2021, 05:04:16 PM |
|
hello All !!!! i`m new in here so ... my question is : what miner shuld i use right now in this date 07.01.2021 i`ve readed that there are some problems with clymore or something like this some Scam/hack something like this
tonight i`ll put my rig all together (luky that i`ve bought gpu`s last month so prices were acceptable) pls any suggestion or idea or anything is welcomed
|
|
|
|
br2459
|
|
January 07, 2021, 06:22:51 PM |
|
hello All !!!! i`m new in here so ... my question is : what miner shuld i use right now in this date 07.01.2021 i`ve readed that there are some problems with clymore or something like this some Scam/hack something like this
tonight i`ll put my rig all together (luky that i`ve bought gpu`s last month so prices were acceptable) pls any suggestion or idea or anything is welcomed
It depends on what you intend on mining. Most people mining ETH are using lolminer, team red miner or Phoenix miner.
|
|
|
|
|