philipma1957
Legendary
 Offline
Activity: 4116
Merit: 7836
'The right to privacy matters'
|
 |
August 22, 2016, 11:05:59 PM |
|
Ja, possibly the board failed QC a xx speed so maybe was binned as runnable at a lower speed.
I'm rather puzzled by the top heatsinks not being nicely (or at least better) aligned. Probably explains why some s7/9's are sirens and others not too bad.
You would think that they would be using a pick-and-place to put them on which should be very very repeatable or if being put on by hand (shudder) at least a frame of some sort to locate them and keep in place until the thermal epoxy hardens...
yeah they could be straighter. Okay a completely different problem. this 2 board miner is working fine but I fucked up the user name and or the password. So it is mining away on kano.is but I can not longer access it. I was trying to change the user name from root to a different user name. and I was trying to change the password. A long day and my mind is very stupid at the moment.  So I now do not know: the user name I do not know the password and the little reset button does not seem to reset the miner. a little help to reset would be nice. |
|
|
|
|
|
|
|
|
|
|
|
|
I HATE TABLES I HATE TABLES I HA(╯°□°）╯︵ ┻━┻ TABLES I HATE TABLES I HATE TABLES
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3626
Merit: 2524
Evil beware: We have waffles!
|
|
August 22, 2016, 11:14:24 PM |
|
Maybe you need to sacrifice some of the critters from those cages in the barn (rabbits?) to whatever gods of BTC you seem to have ticked off...
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7836
'The right to privacy matters'
|
|
August 22, 2016, 11:32:43 PM |
|
Maybe you need to sacrifice some of the critters from those cages in the barn (rabbits?) to whatever gods of BTC you seem to have ticked off...
Seems like I should do that well at least it is mining on my pool of choice. Even If I can't reset it. this link may not work but I followed it and setting stay set https://bitmaintech.com/files/download/AntMiner%20S9%20Installation%20Guide.pdf |
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3626
Merit: 2524
Evil beware: We have waffles!
|
|
August 22, 2016, 11:41:14 PM |
|
Hmm.. Looking at the s9 pic shown in the manual I see a BB in it. Does the batch 10 have a BeagleBone? My batch 11 don't. That said, bet that once again Bitmain may have f***ked up the reset like they did on the s3(?)...
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7836
'The right to privacy matters'
|
|
August 23, 2016, 12:14:35 AM |
|
Hmm.. Looking at the s9 pic shown in the manual I see a BB in it. Does the batch 10 have a BeagleBone? My batch 11 don't. That said, bet that once again Bitmain may have f***ked up the reset like they did on the s3(?)...
Well like I said at least it has a pool setting that works. |
|
|
|
|
fusion0389
|
|
August 23, 2016, 12:26:06 AM |
|
Very sorry to hear about the DOA S9, fortunately, i haven't had any bad luck on the S9-B12 that i received today. Hope it gets resolved quickly...
|
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7836
'The right to privacy matters'
|
|
August 23, 2016, 12:59:54 AM |
|
Very sorry to hear about the DOA S9, fortunately, i haven't had any bad luck on the S9-B12 that i received today. Hope it gets resolved quickly...
it is 2/3 working so i am down say 450 usd unless they replace it. as for lost password it is pointed at my pool |
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3626
Merit: 2524
Evil beware: We have waffles!
|
|
August 23, 2016, 01:08:06 AM |
|
Very sorry to hear about the DOA S9, fortunately, i haven't had any bad luck on the S9-B12 that i received today. Hope it gets resolved quickly...
it is 2/3 working so i am down say 450 usd unless they replace it. as for lost password it is pointed at my pool Hmm, can't say I've tried it on the s9 but doesn't SSH use a different user/password than the GUI? I think with the s7 it is admin/admin (could well be wrong there). If SSH lets you in then it's a matter of will Bitmain's OS let you change & save the GUI access words. edit: Correction, M's Miner Monitor says SSH words for the s5 are root/root and I believe those worked on the s7's. |
|
|
|
edonkey
Legendary
Offline
Activity: 1150
Merit: 1004
|
|
August 23, 2016, 01:08:51 AM |
|
Very sorry to hear about the DOA S9, fortunately, i haven't had any bad luck on the S9-B12 that i received today. Hope it gets resolved quickly...
it is 2/3 working so i am down say 450 usd unless they replace it. as for lost password it is pointed at my pool At the risk of getting even more OT... I guess you're not using a proxy? If you were, then this would be less painful because you'd still be able to change the pool at the proxy level. I've been using the Stratehm stratum-proxy on an RPi and am happy with it. Pointed my S9s at the proxy on a local IP and now I can manage them as a group. That said, I'm sure there must be a way to reset these newer models. Probably have to write them an email (they never answer support in my experience). |
Was I helpful? BTC: 3G1Ubof5u8K9iJkM8We2f3amYZgGVdvpHr
|
|
|
AriesIV10
Legendary
Offline
Activity: 1260
Merit: 1006
Mine for a Bit
|
|
August 23, 2016, 02:39:33 AM |
|
I have all my miners with a hosting company and work individually with my miners remotely through a vpn. Is there a dashboard that I can view my critical information without remoting onto each miner?
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7836
'The right to privacy matters'
|
|
August 23, 2016, 02:49:42 AM |
|
Very sorry to hear about the DOA S9, fortunately, i haven't had any bad luck on the S9-B12 that i received today. Hope it gets resolved quickly...
it is 2/3 working so i am down say 450 usd unless they replace it. as for lost password it is pointed at my pool At the risk of getting even more OT... I guess you're not using a proxy? If you were, then this would be less painful because you'd still be able to change the pool at the proxy level. I've been using the Stratehm stratum-proxy on an RPi and am happy with it. Pointed my S9s at the proxy on a local IP and now I can manage them as a group. That said, I'm sure there must be a way to reset these newer models. Probably have to write them an email (they never answer support in my experience). Yeah I am going to proxy them... Never did a proxy. I had the dead board but discovered that the solar array ip is hacked and Someone diverts hash away from kano.is to where ever. If I bring the miner here to my home behind two routers with different ip the miner gives me two good boards and spends power to mine two good boards. If I take miner to solar array I get credit for board but two board mine. this is a completely different issue with from the dead board... I have seen this issue with s-1 s-3 s-5 s-7 s-9. one board gets diverted. you pay power for two boards or three board depends on the miner. but the mining site gives you credit for one board less then you have. the cure is change your ip and change your password. SO the new miner had 1 dead board and then was mining withe two boards. After a while one board dropped from kano pool but the miner still pulled same power for two boards. I took the miner to my house different ip.. So I change the password and now can not sign into the miner. Or reset it. I am tired of fucking with it. It is mining. 2 boards work fine see below:  |
|
|
|
tbonetony
Sr. Member
Offline
Activity: 441
Merit: 250
No zuo no die why you try, u zuo u die dont be shy
|
|
August 23, 2016, 03:39:13 AM |
|
Very sorry to hear about the DOA S9, fortunately, i haven't had any bad luck on the S9-B12 that i received today. Hope it gets resolved quickly...
it is 2/3 working so i am down say 450 usd unless they replace it. as for lost password it is pointed at my pool At the risk of getting even more OT... I guess you're not using a proxy? If you were, then this would be less painful because you'd still be able to change the pool at the proxy level. I've been using the Stratehm stratum-proxy on an RPi and am happy with it. Pointed my S9s at the proxy on a local IP and now I can manage them as a group. That said, I'm sure there must be a way to reset these newer models. Probably have to write them an email (they never answer support in my experience). Yeah I am going to proxy them... Never did a proxy. I had the dead board but discovered that the solar array ip is hacked and Someone diverts hash away from kano.is to where ever. If I bring the miner here to my home behind two routers with different ip the miner gives me two good boards and spends power to mine two good boards. If I take miner to solar array I get credit for board but two board mine. this is a completely different issue with from the dead board... I have seen this issue with s-1 s-3 s-5 s-7 s-9. one board gets diverted. you pay power for two boards or three board depends on the miner. but the mining site gives you credit for one board less then you have. the cure is change your ip and change your password. SO the new miner had 1 dead board and then was mining withe two boards. After a while one board dropped from kano pool but the miner still pulled same power for two boards. I took the miner to my house different ip.. So I change the password and now can not sign into the miner. Or reset it. I am tired of fucking with it. It is mining. 2 boards work fine see below: I had one incidence similar to your situation where reset didn't work and I had no way to reach it. I was very pissed and somehow throw it into another router's LAN. It got its new ip then all of sudden I was able to reach it and change its settings. Very weird. |
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7836
'The right to privacy matters'
|
|
August 23, 2016, 04:30:42 AM |
|
Very sorry to hear about the DOA S9, fortunately, i haven't had any bad luck on the S9-B12 that i received today. Hope it gets resolved quickly...
it is 2/3 working so i am down say 450 usd unless they replace it. as for lost password it is pointed at my pool At the risk of getting even more OT... I guess you're not using a proxy? If you were, then this would be less painful because you'd still be able to change the pool at the proxy level. I've been using the Stratehm stratum-proxy on an RPi and am happy with it. Pointed my S9s at the proxy on a local IP and now I can manage them as a group. That said, I'm sure there must be a way to reset these newer models. Probably have to write them an email (they never answer support in my experience). Yeah I am going to proxy them... Never did a proxy. I had the dead board but discovered that the solar array ip is hacked and Someone diverts hash away from kano.is to where ever. If I bring the miner here to my home behind two routers with different ip the miner gives me two good boards and spends power to mine two good boards. If I take miner to solar array I get credit for board but two board mine. this is a completely different issue with from the dead board... I have seen this issue with s-1 s-3 s-5 s-7 s-9. one board gets diverted. you pay power for two boards or three board depends on the miner. but the mining site gives you credit for one board less then you have. the cure is change your ip and change your password. SO the new miner had 1 dead board and then was mining withe two boards. After a while one board dropped from kano pool but the miner still pulled same power for two boards. I took the miner to my house different ip.. So I change the password and now can not sign into the miner. Or reset it. I am tired of fucking with it. It is mining. 2 boards work fine see below: I had one incidence similar to your situation where reset didn't work and I had no way to reach it. I was very pissed and somehow throw it into another router's LAN. It got its new ip then all of sudden I was able to reach it and change its settings. Very weird. I stacked a modem then two routers then the miner the address left 192.168.0.126 I was able to rest it back to stock then back to kano.is and I now have a different password then root. thanks |
|
|
|
|
tharani
|
|
August 23, 2016, 07:48:18 AM |
|
I thought this was a S9 thread
indeed it is just a power consumption discussion going on how much a s9 consumes a day. |
send me a message if you want your signature to be posted
|
|
|
|
tharani
|
|
August 23, 2016, 07:49:24 AM |
|
Risking a smack, Bitmain's spec for the APW3-12-1600 PSU specifies output at
DC Voltage
12V
Rated Current
133A
Rated Power
1600W
If there is a DC supply capable of providing that, why can someone not just go DC/DC direct connection?
i.e. battery/solar power without the conversion to AC and back again to DC thru a PSU?
Just asking...
Direct dc is the current default supply in the industrial sector.(in india) Ac is the current default in residential .(in india) Also psu /ups and other equipment provide the conversion needed . But a battery and solar power will cost more to setup and maintain than a just normal psu. |
send me a message if you want your signature to be posted
|
|
|
tmfp
Legendary
Offline
Activity: 1932
Merit: 1737
"Common rogue from Russia with a bare ass."
|
|
August 23, 2016, 08:12:15 AM |
|
Direct dc is the current default supply in the industrial sector.(in india)
Ac is the current default in residential .(in india)
Also psu /ups and other equipment provide the conversion needed .
But a battery and solar power will cost more to setup and maintain than a just normal psu.
It's an interesting subject, but probably worth its own thread. (Hint: we're off topic here).  If there are examples of "home grown" DC setups running a miner, via topped up batteries? without current inversion, I'd be grateful if anyone could link to them. |
Extraordinary Claims require Extraordinary Evidence |
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
|
August 23, 2016, 08:29:00 AM
Last edit: August 23, 2016, 08:58:26 AM by Tupsu |
|
ˇHi,TupsuThe following is your order of scrap equipment:03320160813070114259mCdrl8rX06EC RepairDetail ID 03520160813070114279oxTnD8GD06AC Name Hashboard S9(14T 650M) Damage Causes PIN is lost in circuits boardWhat the hell does it mean ?Damage Causes PIN is lost in circuits boardI have pictures taken before shipment. Do not see anything that would be missing.  View original size - Click on the picture View original size - Click on the pictureLink http://nagi.ee/photos/photo_sizes.php?id=24747333&size=ohttp://nagi.ee/photos/photo_sizes.php?id=24747331&size=o |
|
|
|
|
|
RichBC
|
|
August 23, 2016, 11:59:35 AM |
|
ˇHi,TupsuThe following is your order of scrap equipment:03320160813070114259mCdrl8rX06EC
RepairDetail ID 03520160813070114279oxTnD8GD06AC
Name Hashboard S9(14T 650M)
Damage Causes PIN is lost in circuits board
What the hell does it mean ?
Damage Causes PIN is lost in circuits board
I have pictures taken before shipment.
Do not see anything that would be missing.
On the first picture some of the Pins to the 18 way data connector look poorly soldered, could that be it? Rich |
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
|
August 23, 2016, 12:14:52 PM |
|
ˇHi,TupsuThe following is your order of scrap equipment:03320160813070114259mCdrl8rX06EC
RepairDetail ID 03520160813070114279oxTnD8GD06AC
Name Hashboard S9(14T 650M)
Damage Causes PIN is lost in circuits board
What the hell does it mean ?
Damage Causes PIN is lost in circuits board
I have pictures taken before shipment.
Do not see anything that would be missing.
On the first picture some of the Pins to the 18 way data connector look poorly soldered, could that be it? Rich
Customer Service-Overseas Today at 14:30Dear customer, Your hash board was damaged physically before we received it. It may happened in transit. If you need the picture of the hash board, I can send it to you. Yours respectfully, Quentin |
|
|
|
|
|
delicin33
|
|
August 23, 2016, 01:20:46 PM |
|
Anyone here read Chinese? If so, are those hand written symbols on Phil's bad board readable?
In particular it would be interesting to know the meaning of the symbol that looks like a 4 with a line through it.
its "4" + a line, can't think of any Chinese word like this, the closest is 升/ 川/ 山。。。。。 there some marking on the little white sticker, but can' see clearly |
|
|
|
|
|
