Bitcoin Forum
July 23, 2018, 10:10:57 AM *
News: Latest stable version of Bitcoin Core: 0.16.1  [Torrent]. (New!)
 
   Home   Help Search Donate Login Register  
Pages: « 1 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 [56] 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 ... 351 »
  Print  
Author Topic: Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order  (Read 503983 times)
VERUMinNUMERIS
Sr. Member
****
Offline Offline

Activity: 409
Merit: 252


View Profile
June 27, 2016, 10:30:30 PM
 #1101

Most likely it is not sold out it is another problem. 

BTW I have the same problem and  I have had this happen at least 5 times over the last 2 years.  They may correct it later today.

I am not going to pull the trigger and will hold coins instead.

Historically buying coins has paid out much better.
fair bitcoin games | pvp - pve - solo pve games | faucet |
Free satoshi code btcoon500
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1532340657
Hero Member
*
Offline Offline

Posts: 1532340657

View Profile Personal Message (Offline)

Ignore
1532340657
Reply with quote  #2

1532340657
Report to moderator
1532340657
Hero Member
*
Offline Offline

Posts: 1532340657

View Profile Personal Message (Offline)

Ignore
1532340657
Reply with quote  #2

1532340657
Report to moderator
1532340657
Hero Member
*
Offline Offline

Posts: 1532340657

View Profile Personal Message (Offline)

Ignore
1532340657
Reply with quote  #2

1532340657
Report to moderator
philipma1957
Legendary
*
Offline Offline

Activity: 2170
Merit: 1271


Avalon 841 rocks


View Profile
June 27, 2016, 10:46:47 PM
 #1102

Most likely it is not sold out it is another problem. 

BTW I have the same problem and  I have had this happen at least 5 times over the last 2 years.  They may correct it later today.

I am not going to pull the trigger and will hold coins instead.

Historically buying coins has paid out much better.

some times it works out your way.

I mine alt coins with https://simplemining.net...
I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.
citronick
Legendary
*
Offline Offline

Activity: 1050
Merit: 1031


---- winter*juvia -----


View Profile
June 27, 2016, 10:58:16 PM
 #1103

Trying to get another S9 but getting this error when I hit confirm at the bottom.  Anyone else?  Tried two different browsers.



just redo and start a fresh order

If I provided you good and useful info or just bring a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery... BINANCE vs Huobi.Pro - Buy/Sell hash at Nicehash - Rent Rigs at MRR - SMOS -BBT/VOSK/AANTONOP/CBB/PM57/CryptoNEWS/CoinMktCap/Cryptoboreas
philipma1957
Legendary
*
Offline Offline

Activity: 2170
Merit: 1271


Avalon 841 rocks


View Profile
June 27, 2016, 11:14:49 PM
 #1104

Trying to get another S9 but getting this error when I hit confirm at the bottom.  Anyone else?  Tried two different browsers.



just redo and start a fresh order

no go does not work on 3 different browsers  and on two different bitmaintech accounts.

and I have only ordered 4 units

2x batch 1
2x batch 2
0  batch  3

I mine alt coins with https://simplemining.net...
I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.
Swimmer63
Legendary
*
Offline Offline

Activity: 1584
Merit: 1000



View Profile
June 27, 2016, 11:32:46 PM
 #1105

Trying to get another S9 but getting this error when I hit confirm at the bottom.  Anyone else?  Tried two different browsers.



just redo and start a fresh order

no go does not work on 3 different browsers  and on two different bitmaintech accounts.

and I have only ordered 4 units

2x batch 1
2x batch 2
0  batch  3


Also cleared browsing data and restarted from scratch.  It's their issue.
philipma1957
Legendary
*
Offline Offline

Activity: 2170
Merit: 1271


Avalon 841 rocks


View Profile
June 28, 2016, 12:51:37 AM
 #1106

So I went to bhphotovideo.com  and preordered 

 2 msi rdn rx 480 8gb gpu's   cost a lot less the 2000
used a cc have a 3 year msi warranty and earn points with my cc....

this is the only competition  there is for bitmaintech at the moment.

I mine alt coins with https://simplemining.net...
I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.
generalt
Legendary
*
Offline Offline

Activity: 963
Merit: 1001


View Profile
June 28, 2016, 12:54:00 AM
 #1107

So I went to bhphotovideo.com  and preordered 

 2 msi rdn rx 480 8gb gpu's   cost a lot less the 2000
used a cc have a 3 year msi warranty and earn points with my cc....

this is the only competition  there is for bitmaintech at the moment.

I was considering it but the ship date that they have listed worried me.  I just hope it's a filler date they put into the site.

BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
traxor
Full Member
***
Offline Offline

Activity: 229
Merit: 100


View Profile
June 28, 2016, 01:06:49 AM
 #1108

I have a quick question...

I have 2 separate orders -- 1 paid in 2 minutes, the other in 20 minutes (1st confirmation)...

I did respond to the initial order email with the tx id (per Phillips advice)...

I never received the final order confirmation email.  I went to their website and looked a my 2 most recent orders -- it says "unpaid/unshipped"...

It was 7 hours ago when I placed/paid for the orders...

How long does it normally take to ensure the orders are considered "complete" and not cancelled???

Thanks!!!
philipma1957
Legendary
*
Offline Offline

Activity: 2170
Merit: 1271


Avalon 841 rocks


View Profile
June 28, 2016, 01:28:49 AM
 #1109

So I went to bhphotovideo.com  and preordered 

 2 msi rdn rx 480 8gb gpu's   cost a lot less the 2000
used a cc have a 3 year msi warranty and earn points with my cc....

this is the only competition  there is for bitmaintech at the moment.

I was considering it but the ship date that they have listed worried me.  I just hope it's a filler date they put into the site.

i have done business with them  they are decent.   

so i will await news from newegg
i will await news from provantage.

i look at all the gear and I have 8500 worth of btc miners

and while i have 5 pc's that can hold 15 video cards I have no video cards  so now I at least have 2 on order

I mine alt coins with https://simplemining.net...
I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.
NotFuzzyWarm
Legendary
*
Offline Offline

Activity: 1512
Merit: 1072


Evil beware: We have waffles!


View Profile
June 28, 2016, 01:32:45 AM
 #1110

I have a quick question...

I have 2 separate orders -- 1 paid in 2 minutes, the other in 20 minutes (1st confirmation)...

I did respond to the initial order email with the tx id (per Phillips advice)...

I never received the final order confirmation email.  I went to their website and looked a my 2 most recent orders -- it says "unpaid/unshipped"...

It was 7 hours ago when I placed/paid for the orders...

How long does it normally take to ensure the orders are considered "complete" and not cancelled???

Thanks!!!
Normaly, at most an hour or so. But - my last order for a b3 when they were available again took just under 24hrs to show up on the Bitmain site. It too had previously been marked as unpaid/unshipped..

For bitcoin to succeed the community must police itself - Joshua Zipkin aka Joshua Alexander leaked AMT A1 miner skype chats
How a miner mfgr SHOULD operate: HaggsFIN trip to Canaan My info useful? Donations welcome! 1Fuzzyk398kDWVjuC5qPX5v6CjSkvbgAbd
-Support Sidehacks miner development. Donations to:   1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
traxor
Full Member
***
Offline Offline

Activity: 229
Merit: 100


View Profile
June 28, 2016, 01:53:38 AM
 #1111

Normaly, at most an hour or so. But - my last order for a b3 when they were available again took just under 24hrs to show up on the Bitmain site. It too had previously been marked as unpaid/unshipped..

THANKS!!!

I've already sent the emails including the tx id's -- so I'll just be patient, and see what happens tomorrow!!!

I appreciate your response, as I always get nervous -- even though I've successfully ordered MANY machines from the over the years...


EDIT:  The "paid" confirmation emails arrived 12 hours after I had paid.  So everything should be good!!!
grn
Sr. Member
****
Offline Offline

Activity: 357
Merit: 252


View Profile
June 28, 2016, 02:31:45 AM
 #1112

Hi I have received two units of S9 and both have one board hashing around 2.7

They are batch 2, is it a normal? Any tips?

Thanks!



As others have said try lowering the freq.  I have one board which underperforms as well.  If I do a 'save and apply' without changing anything, sometimes it will come up good (higher hash) and sometimes it will come up bad (lower hash).  But lower freq usually means better odds of it coming up good when I restart cgminer.  I can tell within a minute if it got a good start because it will either come up past 3000 or it wont by that time.

I've got it working with the mysterious "low voltage" firmware from June 22nd. I had to lower the frequency to 593 and reboot quite a few times but now I got it running at 12.6 TH stable, with the slow board around 4000Gh, I guess this is as good as it gets.
I'm wondering if using an alternative PSU to my bitmain one would improve, I will try to borrow one to test.

Heres what my B3 reports....

Code:
Chain# ASIC# Frequency GH/S(RT) HW Temp(PCB) Temp(Chip) ASIC status
1                     63                    600     4263.66     2         61                     91           
3                     63                    600     4278.41     2         63                     95
4                     63                    600     4311.41     5         62                     94

How is that Lexical analysis working out bickneleski?
not.you
Legendary
*
Offline Offline

Activity: 1681
Merit: 1013


View Profile
June 28, 2016, 02:34:26 AM
 #1113

So I went to bhphotovideo.com  and preordered 

 2 msi rdn rx 480 8gb gpu's   cost a lot less the 2000
used a cc have a 3 year msi warranty and earn points with my cc....

this is the only competition  there is for bitmaintech at the moment.

I was considering it but the ship date that they have listed worried me.  I just hope it's a filler date they put into the site.

i have done business with them  they are decent.   

so i will await news from newegg
i will await news from provantage.

i look at all the gear and I have 8500 worth of btc miners

and while i have 5 pc's that can hold 15 video cards I have no video cards  so now I at least have 2 on order

Are you talking about for ether mining?  

I thought you already built a couple ether miners.  
wmabern
Hero Member
*****
Offline Offline

Activity: 658
Merit: 500


Visualize whirledps


View Profile
June 28, 2016, 02:44:39 AM
 #1114

Hi I have received two units of S9 and both have one board hashing around 2.7

They are batch 2, is it a normal? Any tips?

Thanks!



As others have said try lowering the freq.  I have one board which underperforms as well.  If I do a 'save and apply' without changing anything, sometimes it will come up good (higher hash) and sometimes it will come up bad (lower hash).  But lower freq usually means better odds of it coming up good when I restart cgminer.  I can tell within a minute if it got a good start because it will either come up past 3000 or it wont by that time.

I've got it working with the mysterious "low voltage" firmware from June 22nd. I had to lower the frequency to 593 and reboot quite a few times but now I got it running at 12.6 TH stable, with the slow board around 4000Gh, I guess this is as good as it gets.
I'm wondering if using an alternative PSU to my bitmain one would improve, I will try to borrow one to test.

Heres what my B3 reports....

Code:
Chain# ASIC# Frequency GH/S(RT) HW Temp(PCB) Temp(Chip) ASIC status
1                     63                    600     4263.66     2         61                     91           
3                     63                    600     4278.41     2         63                     95
4                     63                    600     4311.41     5         62                     94

Is the low to mid 90's correct operating chip temp on the batch 3?
I've got a batch 3 coming this week.
Thanks.

BITMIXER.IO Gone Baby, Gone.. ;-)
Not any good sig campaigns out there that I want!
philipma1957
Legendary
*
Offline Offline

Activity: 2170
Merit: 1271


Avalon 841 rocks


View Profile
June 28, 2016, 02:44:55 AM
 #1115

So I went to bhphotovideo.com  and preordered  

 2 msi rdn rx 480 8gb gpu's   cost a lot less the 2000
used a cc have a 3 year msi warranty and earn points with my cc....

this is the only competition  there is for bitmaintech at the moment.

I was considering it but the ship date that they have listed worried me.  I just hope it's a filler date they put into the site.

i have done business with them  they are decent.    

so i will await news from newegg
i will await news from provantage.

i look at all the gear and I have 8500 worth of btc miners

and while i have 5 pc's that can hold 15 video cards I have no video cards  so now I at least have 2 on order

Are you talking about for ether mining?  

I thought you already built a couple ether miners.  

 I sold all the cards to prep for the new model cards.  the pc's- mobos are all empty.


but they fixed the error on bitmaintech site so I grabbed the final s-9  the array will be ready for its sixth and final miner.


the tx id is confirmed.


https://blockchain.info/tx/9f661b4b0010da5081d3b2652db0dc695a21d019d84f0f6192984f611bfa4ba3

my fifth and final s-9   should be here by friday I hope.

I mine alt coins with https://simplemining.net...
I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.
grn
Sr. Member
****
Offline Offline

Activity: 357
Merit: 252


View Profile
June 28, 2016, 02:54:48 AM
 #1116

Hi I have received two units of S9 and both have one board hashing around 2.7

They are batch 2, is it a normal? Any tips?

Thanks!



As others have said try lowering the freq.  I have one board which underperforms as well.  If I do a 'save and apply' without changing anything, sometimes it will come up good (higher hash) and sometimes it will come up bad (lower hash).  But lower freq usually means better odds of it coming up good when I restart cgminer.  I can tell within a minute if it got a good start because it will either come up past 3000 or it wont by that time.

I've got it working with the mysterious "low voltage" firmware from June 22nd. I had to lower the frequency to 593 and reboot quite a few times but now I got it running at 12.6 TH stable, with the slow board around 4000Gh, I guess this is as good as it gets.
I'm wondering if using an alternative PSU to my bitmain one would improve, I will try to borrow one to test.

Heres what my B3 reports....

Code:
Chain# ASIC# Frequency GH/S(RT) HW Temp(PCB) Temp(Chip) ASIC status
1                     63                    600     4263.66     2         61                     91           
3                     63                    600     4278.41     2         63                     95
4                     63                    600     4311.41     5         62                     94

Is the low to mid 90's correct operating chip temp on the batch 3?
I've got a batch 3 coming this week.
Thanks.

Its warmer than I would prefer, But ambient is 30C right now

How is that Lexical analysis working out bickneleski?
wmabern
Hero Member
*****
Offline Offline

Activity: 658
Merit: 500


Visualize whirledps


View Profile
June 28, 2016, 02:58:20 AM
 #1117

Hi I have received two units of S9 and both have one board hashing around 2.7

They are batch 2, is it a normal? Any tips?

Thanks!



As others have said try lowering the freq.  I have one board which underperforms as well.  If I do a 'save and apply' without changing anything, sometimes it will come up good (higher hash) and sometimes it will come up bad (lower hash).  But lower freq usually means better odds of it coming up good when I restart cgminer.  I can tell within a minute if it got a good start because it will either come up past 3000 or it wont by that time.

I've got it working with the mysterious "low voltage" firmware from June 22nd. I had to lower the frequency to 593 and reboot quite a few times but now I got it running at 12.6 TH stable, with the slow board around 4000Gh, I guess this is as good as it gets.
I'm wondering if using an alternative PSU to my bitmain one would improve, I will try to borrow one to test.

Heres what my B3 reports....

Code:
Chain# ASIC# Frequency GH/S(RT) HW Temp(PCB) Temp(Chip) ASIC status
1                     63                    600     4263.66     2         61                     91           
3                     63                    600     4278.41     2         63                     95
4                     63                    600     4311.41     5         62                     94

Is the low to mid 90's correct operating chip temp on the batch 3?
I've got a batch 3 coming this week.
Thanks.

Its warmer than I would prefer, But ambient is 30C right now

Thank you. I was just wondering what temps I should strive for with the S9B3.

BITMIXER.IO Gone Baby, Gone.. ;-)
Not any good sig campaigns out there that I want!
not.you
Legendary
*
Offline Offline

Activity: 1681
Merit: 1013


View Profile
June 28, 2016, 03:02:46 AM
 #1118


 I sold all the cards to prep for the new model cards.  the pc's- mobos are all empty.


but they fixed the error on bitmaintech site so I grabbed the final s-9  the array will be ready for its sixth and final miner.


the tx id is confirmed.


https://blockchain.info/tx/9f661b4b0010da5081d3b2652db0dc695a21d019d84f0f6192984f611bfa4ba3

my fifth and final s-9   should be here by friday I hope.

Fell off the fence you did on that last S9.

Where did you sell the old cards?  Ebay?  I have 5 r9 290's.  I thought for $250 they were a good deal but it looks like the rx 490 is going to be in the same pricing ballpark.  I wonder what the performance difference will be.  Lower power usage will be nice though.
philipma1957
Legendary
*
Offline Offline

Activity: 2170
Merit: 1271


Avalon 841 rocks


View Profile
June 28, 2016, 03:27:55 AM
 #1119


 I sold all the cards to prep for the new model cards.  the pc's- mobos are all empty.


but they fixed the error on bitmaintech site so I grabbed the final s-9  the array will be ready for its sixth and final miner.


the tx id is confirmed.


https://blockchain.info/tx/9f661b4b0010da5081d3b2652db0dc695a21d019d84f0f6192984f611bfa4ba3

my fifth and final s-9   should be here by friday I hope.

Fell off the fence you did on that last S9.

Where did you sell the old cards?  Ebay?  I have 5 r9 290's.  I thought for $250 they were a good deal but it looks like the rx 490 is going to be in the same pricing ballpark.  I wonder what the performance difference will be.  Lower power usage will be nice though.

I sold all the cards here at very good prices. 200 for r9 390s

And 300 for nanos.

While that is low I sold the day that eth crashed and I wanted to get my roi assured.

Right now everything for my eth gear is 100 % paid including the two rx 480s on pre order.

I have room for 13 more gpus.  And will have the two up and running soon.

I could of held the cards and mined but that crashed spooked me a bit and the chance to be at even with two gpus on order and pic/ mobos ready for 13 cards was something I did not want to pass

I mine alt coins with https://simplemining.net...
I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.
hawkfish007
Hero Member
*****
Offline Offline

Activity: 880
Merit: 501


View Profile
June 28, 2016, 03:31:26 AM
 #1120

So I went to bhphotovideo.com  and preordered  

 2 msi rdn rx 480 8gb gpu's   cost a lot less the 2000
used a cc have a 3 year msi warranty and earn points with my cc....

this is the only competition  there is for bitmaintech at the moment.

I was considering it but the ship date that they have listed worried me.  I just hope it's a filler date they put into the site.

i have done business with them  they are decent.    

so i will await news from newegg
i will await news from provantage.

i look at all the gear and I have 8500 worth of btc miners

and while i have 5 pc's that can hold 15 video cards I have no video cards  so now I at least have 2 on order

Are you talking about for ether mining?  

I thought you already built a couple ether miners.  

 I sold all the cards to prep for the new model cards.  the pc's- mobos are all empty.


but they fixed the error on bitmaintech site so I grabbed the final s-9  the array will be ready for its sixth and final miner.


the tx id is confirmed.


https://blockchain.info/tx/9f661b4b0010da5081d3b2652db0dc695a21d019d84f0f6192984f611bfa4ba3

my fifth and final s-9   should be here by friday I hope.

Ordered my second S9 also, but my power cost is $.089 @ sidehack slightly more than you. We will see if this purchase was a good decision or not in 5 or 6 months, hopefully good Smiley I want to replace my hash from selling 20 S7s but probably wait for B6 or 7 for my next orders.

Edit: Phil did your order get confirmed by Bitmain. After 3 7 confirmations mine still shows unpaid.

For quality risers, splitters or 133 CFM fans, please visit my eBay listings,
http://www.ebay.com/sch/hawkfish007/m.html?_ipg=50&_sop=12&_rdc=1
Pages: « 1 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 [56] 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 ... 351 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!