vortexz
Legendary
Offline
Activity: 1120
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 09:17:10 AM |
|
Anyone knows some Antminer S9 Monitors ?? I had M miner Monitor with the S7 but it doesn't recognize the s9 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 10:12:30 AM |
|
Yes please do get the picture:). Be interested to see if it's the same board you sent in. Should be easy enough to tell for as shitty as these seem to be put together. Ie the heat sinks look like a kid put them on and if it's the case of human putting them on they will all be different. Please get the pic
BR
Edit it should be mandatory to open and inspect the miner prior to use. If the heat sinks aren't aligned properly you will have overheating but only on a few chips. Those chips burn up and bitmain Doesn't have to honor warranty. What a shit!
Where is the picture with high resolution and with a serial number and damage ? Customer Service-Overseas Today at 11:11 Dear customer, Sorry to keep you wait. As you can see in the attachment, two heat sinks of the hash board dropped off, which lead to the PIN lost in circuits board. The hash board is likely to be hit in transit. Our engineer have tried their best, but it is no use. It can not be repaired anymore. We suggest you to make a claim to your logistics agent. Please find our returning policy in the attachment. Yours respectfully, Quentin _________________________________________________________________________ View original size - Click on the picture
|
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 10:13:35 AM |
|
My answer to Bitmain
You're lying. I want proof that this is my hashchboard. High resolution image os whole haschboard, which also shows the serial number, It is not possible, that whit transport was off the radiator or radiator with chips. Before packing tI carefully checked all radiators on the on the side . All were tight. With My package was not possible for them to become damaged during transport.
It possible that your engineer making injury during repair, or this is or it is not my blade. I want to warranty repair or replacement.
I have in my side fulfilled all the terms of the warranty..
first I want new and better picture with serial to prove that it is my haschboard.
|
|
|
|
AriesIV10
Legendary
Offline
Activity: 1260
Merit: 1006
Mine for a Bit
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 10:24:32 AM |
|
Anyone knows some Antminer S9 Monitors ?? I had M miner Monitor with the S7 but it doesn't recognize the s9 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Second Question of same category: I have all my miners with a hosting company and work individually with my miners remotely through a vpn. Is there a dashboard that I can view my critical information without having to remote onto each miner?
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 10:27:17 AM |
|
Give em hell Tupsu !!!!!!!!!!!!!!!!!!!!!!!!!! ![Angry](https://bitcointalk.org/Smileys/default/angry.gif) Be damned if I buy anything from Bitmain ever !!!!!! ![Angry](https://bitcointalk.org/Smileys/default/angry.gif) Go with GPU mining guys,AMD & Nvidia don't sqabble & bitch about warranties ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 11:18:22 AM |
|
Anyone knows some Antminer S9 Monitors ?? I had M miner Monitor with the S7 but it doesn't recognize the s9 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Second Question of same category: I have all my miners with a hosting company and work individually with my miners remotely through a vpn. Is there a dashboard that I can view my critical information without having to remote onto each miner? See my signature. There is a free solution but it needs network access to the machines.
|
|
|
|
numnutz2009
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 12:05:18 PM Last edit: August 24, 2016, 01:14:44 PM by numnutz2009 |
|
Yeah, the rattling sound which comes from the boards being loosely attached almost made me shit my pants when I received my Ant S9 and carefully turned it around 360deg few times. ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) It was kind of tricky to find out if there is any loose heat sinks before turning it on. Luckily my unit turned out too be a good one, at least so far. Sorry to hear about you guys' S9 problems though ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) IKR!?!? i flip all my miners 360 degrees when i first get them or move them just in case a heat sink fell off on their way to me but the board kept throwing me off a bit. pushing the controller forward and putting a dab of hot glue at the 2 exposed corners holds the controller firmly in place and isnt messy and doesnt take a whole lot of work. it can also be undone with just about no effort on my part too. i just dont like the idea of a pcb bouncing around in a metal enclosure....it makes me cringe.
|
|
|
|
mammon
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 02:08:51 PM |
|
Seems, Bitmain is getting worse and worse...
|
|
|
|
fusion0389
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 03:08:17 PM |
|
Yeah, the rattling sound which comes from the boards being loosely attached almost made me shit my pants when I received my Ant S9 and carefully turned it around 360deg few times. ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) It was kind of tricky to find out if there is any loose heat sinks before turning it on. Luckily my unit turned out too be a good one, at least so far. Sorry to hear about you guys' S9 problems though ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) IKR!?!? i flip all my miners 360 degrees when i first get them or move them just in case a heat sink fell off on their way to me but the board kept throwing me off a bit. pushing the controller forward and putting a dab of hot glue at the 2 exposed corners holds the controller firmly in place and isnt messy and doesnt take a whole lot of work. it can also be undone with just about no effort on my part too. i just dont like the idea of a pcb bouncing around in a metal enclosure....it makes me cringe. Agreed, it shouldn't be that hard for Bitmain to take out that slop nor should it really "cost" them any money. I'd like to see them tighten up QA, at the price they're asking, these things need to be bullet proof.
|
|
|
|
chiguireitor
Legendary
Offline
Activity: 872
Merit: 1010
Coins, Games & Miners
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 03:57:26 PM |
|
Anyone knows some Antminer S9 Monitors ?? I had M miner Monitor with the S7 but it doesn't recognize the s9 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Second Question of same category: I have all my miners with a hosting company and work individually with my miners remotely through a vpn. Is there a dashboard that I can view my critical information without having to remote onto each miner? I'm about to release a product for that, maybe a month and a half more of development. We have monitoring, auto soft and hard reset and other niceties like modem/router reset on bad internet etc. No need for direct access and we will release a cloud dashboard to boot. Here's a screenshot, of a couple of small S5 farms, sorry for the spanish language, that's one of our supported languages and my interface is on that. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FjiYRfLb.png&t=665&c=IoAVaSYaigqRlQ)
|
|
|
|
edonkey
Legendary
Offline
Activity: 1150
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 04:22:27 PM |
|
Anyone knows some Antminer S9 Monitors ?? I had M miner Monitor with the S7 but it doesn't recognize the s9 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Second Question of same category: I have all my miners with a hosting company and work individually with my miners remotely through a vpn. Is there a dashboard that I can view my critical information without having to remote onto each miner? I'm about to release a product for that, maybe a month and a half more of development. We have monitoring, auto soft and hard reset and other niceties like modem/router reset on bad internet etc. No need for direct access and we will release a cloud dashboard to boot. Here's a screenshot, of a couple of small S5 farms, sorry for the spanish language, that's one of our supported languages and my interface is on that. Interesting. Does it also act as a proxy?
|
Was I helpful? BTC: 3G1Ubof5u8K9iJkM8We2f3amYZgGVdvpHr
|
|
|
Sierra8561
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 04:50:39 PM |
|
I returned a I/O board that was faulty, Bitmain shipped my replacement two days after receiving the defective board. They have been really good to me on any warranty issue.
|
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 05:59:51 PM |
|
I returned a I/O board that was faulty, Bitmain shipped my replacement two days after receiving the defective board. They have been really good to me on any warranty issue.
Presumably, this was not the S9. Here is waiting weeks for not working S9 controller.
|
|
|
|
unsoindovo
Legendary
Offline
Activity: 1932
Merit: 1042
https://locktrip.com/?refId=40964
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 07:41:43 PM |
|
Anyone knows some Antminer S9 Monitors ?? I had M miner Monitor with the S7 but it doesn't recognize the s9 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Second Question of same category: I have all my miners with a hosting company and work individually with my miners remotely through a vpn. Is there a dashboard that I can view my critical information without having to remote onto each miner? I'm about to release a product for that, maybe a month and a half more of development. We have monitoring, auto soft and hard reset and other niceties like modem/router reset on bad internet etc. No need for direct access and we will release a cloud dashboard to boot. Here's a screenshot, of a couple of small S5 farms, sorry for the spanish language, that's one of our supported languages and my interface is on that. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FjiYRfLb.png&t=665&c=IoAVaSYaigqRlQ) this could be interesting.. do you have a site or tweetter account to stay tuned?
|
|
|
|
chudm
Newbie
Offline
Activity: 59
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 09:05:11 PM |
|
I would rather they simply honored the warranty. If it breaks in the first 90 days it gets replaced without a lot of rigamarole on their part. Buying a miner and getting a 10% coupon on the next is worthless if the miner I bought only performs to 66% of spec. There are a lot of tech companies that provide excellent and reliable warranties. Bitmain could be one if they wanted to.
Yeah but the shipping back to China at high cost is a killer along with no cross shipping. It is not like an Intel CPU which ships at low cost. BTW When I killed my Intel i5 6600k I had two options cross ship at an extra cost of 25 usd or send it in and wait . I went the cheap way and had a new CPU in 8 days. If I cross shipped for 25 extra I could wait to ship the dead one back and would of had it in 2 days. I did not need it that fast so I saved the 25 extra cost. I actually do not hate bitmaintech but they are a bit short on service if gear breaks down. They need to adapt on this. Some reasons: 1) they are helping gpu miners with their short warranty 2) break even on asic gear is not 60 to 120 days. So the 90 day warranty means your gear is almost certain to not roi under warranty this helps gpu mining 3) they are pretty well known for not honoring warranty this helps gpu mining Basically here is my Eth setup and I convert most coins to btc. Bitmaintech has created demand for gpu mining. Mostly over their warranty issues. 18 cards two 4 card rigs and five 2 card rigs. Every piece has at least 1 year warranty or more. Most have a 2 year warranty. https://i.imgur.com/R72hWho.pngphil, what are you doing? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) releasing the secret of how to get the same amount of btc with 2.5-3 times less watts and a real warranty? It is an open secret. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Bitmaintech is king of ASIC world And they need to watch for gpu world more then anything else. Hey phil i sent you a dm if you can check it out please ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
chiguireitor
Legendary
Offline
Activity: 872
Merit: 1010
Coins, Games & Miners
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 11:28:33 PM |
|
...
Interesting. Does it also act as a proxy?
I'm considering that already, and also a drag & drop interface for pool change. Wanted to use ckpool (as that's what i use), but it is a no-go in ARM platforms. ...
this could be interesting.. do you have a site or tweetter account to stay tuned?
My business site is primarily about biometrics and HR stuff. However i will surely tweet about the project release and notify around here when it's time. My tweeter (personal one, but i'll tweet there) is @johnvillarz. Just as a heads-up, initial release will only have capacity for 1 hardware control, but we have already working prototypes of the hardware expansors, which will go from 4 hardware control ports for hte basic expansor to 32 or 64, depending on demand).
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2016, 11:46:55 PM |
|
Looks like one of mine has a dead middle board. All x's
Tried lowering frequency to 575 but no luck, it comes up as o's but won't hash, then after a while goes to x's
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3724
Merit: 2656
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 25, 2016, 12:03:42 AM |
|
Looks like one of mine has a dead middle board. All x's
Tried lowering frequency to 575 but no luck, it comes up as o's but won't hash, then after a while goes to x's
So far all s9s good here including the 2 new batch 11's. Have all my fingers, toes and eyes crossed hoping they stay that way... Any yes, is a bvyche typng liker that...
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8373
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 25, 2016, 12:30:36 AM |
|
I would rather they simply honored the warranty. If it breaks in the first 90 days it gets replaced without a lot of rigamarole on their part. Buying a miner and getting a 10% coupon on the next is worthless if the miner I bought only performs to 66% of spec. There are a lot of tech companies that provide excellent and reliable warranties. Bitmain could be one if they wanted to.
Yeah but the shipping back to China at high cost is a killer along with no cross shipping. It is not like an Intel CPU which ships at low cost. BTW When I killed my Intel i5 6600k I had two options cross ship at an extra cost of 25 usd or send it in and wait . I went the cheap way and had a new CPU in 8 days. If I cross shipped for 25 extra I could wait to ship the dead one back and would of had it in 2 days. I did not need it that fast so I saved the 25 extra cost. I actually do not hate bitmaintech but they are a bit short on service if gear breaks down. They need to adapt on this. Some reasons: 1) they are helping gpu miners with their short warranty 2) break even on asic gear is not 60 to 120 days. So the 90 day warranty means your gear is almost certain to not roi under warranty this helps gpu mining 3) they are pretty well known for not honoring warranty this helps gpu mining Basically here is my Eth setup and I convert most coins to btc. Bitmaintech has created demand for gpu mining. Mostly over their warranty issues. 18 cards two 4 card rigs and five 2 card rigs. Every piece has at least 1 year warranty or more. Most have a 2 year warranty. https://i.imgur.com/R72hWho.pngphil, what are you doing? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) releasing the secret of how to get the same amount of btc with 2.5-3 times less watts and a real warranty? It is an open secret. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Bitmaintech is king of ASIC world And they need to watch for gpu world more then anything else. Hey phil i sent you a dm if you can check it out please ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) what is a dm?
|
|
|
|
AriesIV10
Legendary
Offline
Activity: 1260
Merit: 1006
Mine for a Bit
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 25, 2016, 12:56:45 AM |
|
...
Interesting. Does it also act as a proxy?
I'm considering that already, and also a drag & drop interface for pool change. Wanted to use ckpool (as that's what i use), but it is a no-go in ARM platforms. ...
this could be interesting.. do you have a site or tweetter account to stay tuned?
My business site is primarily about biometrics and HR stuff. However i will surely tweet about the project release and notify around here when it's time. My tweeter (personal one, but i'll tweet there) is @johnvillarz. Just as a heads-up, initial release will only have capacity for 1 hardware control, but we have already working prototypes of the hardware expansors, which will go from 4 hardware control ports for hte basic expansor to 32 or 64, depending on demand). Very Interesting! I am looking forward to it. When you get it done, let us know!
|
|
|
|
|