Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order

[philipma1957]

hy

in the antminer s9 interface under Miner configuration i dont have the option to modify the frequency. Do i have to update some specific software to have that option. The reason why is that i want to lower the frequency because the temperature is to high. constantly working o0n 100 celsius

tough luck dude.

all newer s9's are auto tune  :

no freq adjustments

[plinuxx]

hy

in the antminer s9 interface under Miner configuration i dont have the option to modify the frequency. Do i have to update some specific software to have that option. The reason why is that i want to lower the frequency because the temperature is to high. constantly working o0n 100 celsius

tough luck dude.

all newer s9's are auto tune  :

no freq adjustments

Is it a problem to have it working on a temperature around 95 celsius?

[philipma1957]

hy

in the antminer s9 interface under Miner configuration i dont have the option to modify the frequency. Do i have to update some specific software to have that option. The reason why is that i want to lower the frequency because the temperature is to high. constantly working o0n 100 celsius

tough luck dude.

all newer s9's are auto tune  :

no freq adjustments

Is it a problem to have it working on a temperature around 95 celsius?

105 is bad 95 should be good.

s9 gear breaks a lot  it is not very reliable.

at best  it has about a 10%  breakage rate. 

 I am at about 16%  3 bad boards of 21  and maybe  a fourth as I have a shaky board.

And 1 bad controller out of 7

[Biodom]

network hash increased sharply, maybe another S9/R4 batch is being baked-in.

[not.you]

speaking of Denver, they have had one of my boards for over a week now and still no diagnosis. Not very happy with them at the moment plus another s9 I own that they repaired runs like shit.

Bitmain products are like a box of chocolates, never know what you are going to get   

Check your spam folder.  They are usually pretty good about being faster than that.

[Biodom]

S9 11th and R4 reappeared as sold out items on bitmain.
Next step, they will probably un-grey, prepare your coins...if you got 'em..
...or pay the draconian 4% coinbase CC fee
I pass.

[hashpipe]

S9 11th and R4 reappeared as sold out items on bitmain.
Next step, they will probably un-grey, prepare your coins...if you got 'em..
...or pay the draconian 4% coinbase CC fee
I pass.

Been lurking for a while now... Good news! Is this what happened in the past prior to product becoming available?

I have been out of the mining game for a while now, but wanting to get my toes wet again. It seems Bitmain offers best bang for the buck for a while now? Though, it is arguable whether a ROI is possible or not evenb with an S9 at the moment. Are 5% reasonable assumed average difficulty jumps at the moment? What are the current thoughts on getting back in the game and a possible ROI? Start off with one or two S9s, due to possible hw problems? As far as I can tell, except for a PSU there are no accessories required. Power it up with an ethernet connection and good to go?

What are the experiences out there, about 24h data volumes mining with an S9? Is it feasible to mine via TOR?

What is the consensus out there about powering an S9 on an EVGA 1300 - should be a good fit?

What are the experiences with overseas shipping costs? What are the expected shipping costs to Europe, US, Australia, Africa anybody?

Sorry for these basic questions. I did browse through the thread, but really cant be reading the whole thing, even though it is a lot shorter then the old knc thread... I appreciate any thoughts an inputs (please don't shoot me down in flames

PS: There is also a new kid on the block with a slightly more expensive rig here. The website is very slow and often times out though:
http://miner.ebang.com.cn/en/product/product-10-670.html

or on bitcointalk:
https://bitcointalk.org/index.php?topic=1704717.20

[PeaMine]

Just got my new S9 in.
Hashing at around 13.7 pool side.
Autotune only.  Yet my fastest and cheapest S9.
So far had one board go out on an older S9, and then the rest do about 1TH under what is reported.

[buysolar]

I just got a new s9 yesterday and it's the best one yet for me. 13.5th using autotune. Hopefully it keeps going strong like this for the next couple years.

[tbonetony]

I just got a new s9 yesterday and it's the best one yet for me. 13.5th using autotune. Hopefully it keeps going strong like this for the next couple years.

Good to know. What was the price for this 13.5 model?

[Biodom]

About $1500-1505 shipped.
watch out for long term autotune.
It starts higher, then decreases a bit.

[elokk]

speaking of Denver, they have had one of my boards for over a week now and still no diagnosis. Not very happy with them at the moment plus another s9 I own that they repaired runs like shit.

Bitmain products are like a box of chocolates, never know what you are going to get   

Check your spam folder.  They are usually pretty good about being faster than that.

Nope, they are still trying to figure out what is wrong with the board. The board arrived in Denver Monday December 5.

Now I have a board not hashing on an R4

[ZymurBits]

S9 11th and R4 reappeared as sold out items on bitmain.
Next step, they will probably un-grey, prepare your coins...if you got 'em..
...or pay the draconian 4% coinbase CC fee
I pass.

These were the same batch numbers they had mid-November.  I hope they are coming out with another batch soon.  Getting mighty cold around these parts and the better half complains about the garage being cold.  Would make a great Christmas present for her, right?   

[AriesIV10]

S9 11th and R4 reappeared as sold out items on bitmain.
Next step, they will probably un-grey, prepare your coins...if you got 'em..
...or pay the draconian 4% coinbase CC fee
I pass.

These were the same batch numbers they had mid-November.  I hope they are coming out with another batch soon.  Getting mighty cold around these parts and the better half complains about the garage being cold.  Would make a great Christmas present for her, right?  

The last batch I received on Tuesday had firmware dated:  Tue Dec 6 00:46:07 EST 2016

[tbonetony]

S9 11th and R4 reappeared as sold out items on bitmain.
Next step, they will probably un-grey, prepare your coins...if you got 'em..
...or pay the draconian 4% coinbase CC fee
I pass.

These were the same batch numbers they had mid-November.  I hope they are coming out with another batch soon.  Getting mighty cold around these parts and the better half complains about the garage being cold.  Would make a great Christmas present for her, right?  

The last batch I received on Tuesday had firmware dated:  Tue Dec 6 00:46:07 EST 2016

newer than the official posted?!

[wolfen]

S9 11th and R4 reappeared as sold out items on bitmain.
Next step, they will probably un-grey, prepare your coins...if you got 'em..
...or pay the draconian 4% coinbase CC fee
I pass.

These were the same batch numbers they had mid-November.  I hope they are coming out with another batch soon.  Getting mighty cold around these parts and the better half complains about the garage being cold.  Would make a great Christmas present for her, right?  

The last batch I received on Tuesday had firmware dated:  Tue Dec 6 00:46:07 EST 2016

newer than the official posted?!

That is pretty weird. Usually it would be a version or two back.

[PeaMine]

S9 11th and R4 reappeared as sold out items on bitmain.
Next step, they will probably un-grey, prepare your coins...if you got 'em..
...or pay the draconian 4% coinbase CC fee
I pass.

These were the same batch numbers they had mid-November.  I hope they are coming out with another batch soon.  Getting mighty cold around these parts and the better half complains about the garage being cold.  Would make a great Christmas present for her, right?  

The last batch I received on Tuesday had firmware dated:  Tue Dec 6 00:46:07 EST 2016

Seems to be a nice stable version so far.

[Rabinovitch]

Guys, what is the CPU load (especially by bmminer process) in your S9s while it hashing? Please share a screenshot here.

[takagari]

Guys, what is the CPU load (especially by bmminer process) in your S9s while it hashing? Please share a screenshot here.

Code:

Mem: 58724K used, 957076K free, 0K shrd, 837488K buff, 837536K cached
CPU:  0.0% usr  5.2% sys  0.0% nic 94.7% idle  0.0% io  0.0% irq  0.0% sirq
Load average: 0.35 0.25 0.24 1/86 18033

[vancenkansas]

Guys, what is the CPU load (especially by bmminer process) in your S9s while it hashing? Please share a screenshot here.

https://i.imgur.com/lnMVWSy.gif

https://i.imgur.com/iXYxyJ7.gif