[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[Johny101010]

hello
i just test simplemining
i would like to make ethereum + pascal
i don't see example
i mine on nanopool
when i generate a data on windows it ok but when i boot on simplemining i don't now have you a sample usage
thanks in advance

-wd 1 -r 1 -epool eth-eu1.nanopool.org:9999 -ewal $walletETH.$rigName -epsw x -allpools 1 -mode 0 -estale 0 -etha 0  -asm 1 -ethi 16  -dcoin pasc -dpool pasc-us-east1.nanopool.org:15555 -dwal 86646.af8a25f72970604.rig1/xxx@gmail.com -dpsw x 

This will work. Just change the email and address for Pascal to yours. Also I always use the -dcri to control the intensity and max eth hashrate.

[xPETEx]

Isn't it possible to create an option to allow us to add a specific miner if we want? I mean, the installed cc miner for instance is terrible for some algos...

you can do this. through SSH you can go in and install whatever custom miner you want. If it's that important to you then spend a couple hours, and it'll happen

[minkuluk]

i made a deposit yesterday, still my balance not being added yet..
i sent you email twice and still no answer..
always have a problem with deposit so far.. 

[citronick]

Isn't it possible to create an option to allow us to add a specific miner if we want? I mean, the installed cc miner for instance is terrible for some algos...

you can do this. through SSH you can go in and install whatever custom miner you want. If it's that important to you then spend a couple hours, and it'll happen

I think you are missing point.  Going in through SSH and installing a new miner is not so simple, is it?  And there really isn't an excuse to still be running CCminer-tpruvot 2.1 when it is up to v2.2.3; at least update it to 2.2.2.

The ccminer with Skunk kernel is v2.2

[chai_man]

excuse me.

I was previously an ethos user, and I just want to switch to smos.
I already paid deposit fee.
why the media that I give smos is always not readable in the bios? so i can not boot to smos.

I've tried to use flash, ssd & hdd the results are also the same, when I fill the smos is always not readable by bios.

I've tried using various software, such as: hddraw copy, etcher, rufus. but the result remains the same as above.

what's the solution?

hardware specifications:
motherboard asus b250 mining expert
vga 12pcs x rx 580
ram 8 giga.
psu 2 x corsair ax1200i
procie intel g4400

after and before thank you very much.

CSM has to be enabled, go to the advanced mode and enable it in the boot section.

[tomica]

I'm using SMOS for quite a bit time, and pretty happy about it.

Last 5 months I have not touched anything and today I have checked status and I see that one GPU is not listed, I can't see for how long it is offline at the pool or at SMOS.

There is probably something dead or needs to be checked, but since rig is far away from me I will do it later.

My question is: Will there be an option to send report by mail about offline rigs or changes in configurations?

Thanks!

[VyprBTC]

I'm using SMOS for quite a bit time, and pretty happy about it.

Last 5 months I have not touched anything and today I have checked status and I see that one GPU is not listed, I can't see for how long it is offline at the pool or at SMOS.

There is probably something dead or needs to be checked, but since rig is far away from me I will do it later.

My question is: Will there be an option to send report by mail about offline rigs or changes in configurations?

Thanks!

would be nice to have a monitor - it's why i haven't switched over from windows yet. no monitoring.


i do like that it was literally plug and play for the drivers, booted up and found all 6 GPU's right away.

With windows it does take more time for the initial, have to download nvidia driver updates, then 90% of the time I have to plug in 1 card at a time, reboot till it reads all 6. BUT once you do that, there's tons of miner monitors and haven't had 1 single issue with win10 in the past year, so still on the fence migrating farm to smos.

[tomica]

would be nice to have a monitor - it's why i haven't switched over from windows yet. no monitoring.

To monitor something, as watching speed, status, temperature, there is an awesome interface in SMOS.
I think that you are talking about "reporting" and not "monitoring"?

[lablefromu]

guys can you tell me how to fix this error:

"failed to set new fan speed check if miner has root access"


I have 3 x rx 580 8gb nitro plus

[citronick]

I'm using SMOS for quite a bit time, and pretty happy about it.

Last 5 months I have not touched anything and today I have checked status and I see that one GPU is not listed, I can't see for how long it is offline at the pool or at SMOS.

There is probably something dead or needs to be checked, but since rig is far away from me I will do it later.

My question is: Will there be an option to send report by mail about offline rigs or changes in configurations?

Thanks!

would be nice to have a monitor - it's why i haven't switched over from windows yet. no monitoring.


i do like that it was literally plug and play for the drivers, booted up and found all 6 GPU's right away.

With windows it does take more time for the initial, have to download nvidia driver updates, then 90% of the time I have to plug in 1 card at a time, reboot till it reads all 6. BUT once you do that, there's tons of miner monitors and haven't had 1 single issue with win10 in the past year, so still on the fence migrating farm to smos.

use SRR system with smOS for 24x7x365 mining

[CatseyeN]

Dear tytanick,
I'm a happy user of SMOS and I would like to give you some feedback about a new v3030 dashboard.
If I had a chance I would vote to stay on the old way of showing temperatures and fanspeeds instead of new "fanspeed/temperature field now shows only biggest value" way.
It was useful for me to monitor all cards readings, simply peeking to dashboard from time to time. Now clicking on temp
Hope my opinion can serve for your feedback statistics. Anyway, thanks for your classy SMOS.

[marimach77]

@tytanick @citronick What's the status of RX Vega support in SMOS? I'm thinking about new rig based on a few Vega GPUs and will go for it only if SMOS supports it. Do you plan to implement this driver http://support.amd.com/en-us/kb-articles/Pages/AMDGPU-Pro-Beta-Mining-Driver-for-Linux-Release-Notes.aspx - 17.40?

 

[SouthofKC]

New to simplemining. Got everything set up and running ok I think. But I keep getting error messages that says miner crashed/ended. When I look in the console all I see are stratum error. I’ve double checked my pool settings (luck pool)
And I have the correct address and port for Hush.

Am I just over looking something?

[Whitehawk29]

Hi all,

I have a new rig with 6*RX580 8gb Sapphire special edition.

With only 5 GPU no problem with simpleMiningOS, but with 6 gpu, one of them (GPU3)  immedialty go to 0.00Mh/s so the rig is always rebooting.

What could be the problem ?

[Wolverine_Na]

Hi all,

I have a new rig with 6*RX580 8gb Sapphire special edition.

With only 5 GPU no problem with simpleMiningOS, but with 6 gpu, one of them (GPU3)  immedialty go to 0.00Mh/s so the rig is always rebooting.

What could be the problem ?

What is your setting?

[willi9974]

bring your overclocking setting on this GPU a little bit down and reboot your system

[willi9974]

Hello,

one of my cards catch no share.

Total Shares: 350(50+42+58+45+55+47+0+53)

If it possible to get this Info on the WebSite per Miner, or the other side from that, to see all incorrect share per card?


and a other question, how can i log into my miner per SSH?

Best Regards
Willi

[josh75]

is it possible to mining BITCOIN GOLD with simple mining with NVIDIA CARDS ?

thank you all for your answers.

[davemanet]

can anyone share the command to mine electroneum?

also what should the mem clock be changed to if i currently have mine set at 2000?

[xleejohnx]

is it possible to edit failovers pools on the fly or do I need to go into each system and edit the file?