[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[AvatovNek]

Anyone mining IPBC?  If so, what algo, cards, and results.  Thinking about giving it a try.  Thanks!

[minimalist55]

Sapphire RX 580 8GB Nitro+ SE Problem with Biostar TB-250 BTC PRO

I had my 6x MSI RX 580 Gaming X 8G working for more than 4 months on Biostar TB-250 BTC PRO.
I bought 6 more GPU to complete the rig. Sapphire RX 580 8GB Nitro+ SE.
SMOS don’t accept two or more of this card. I can only use one of them with my 6 other MSI.
I tried 5 MSI with 2 Sapphire but same problem. I tried only 2 Sapphire with no MSI, same problem.
There is no problem with risers or PSU or any other hardware.
I took some photos of the problems. I still couldn't get any answer from SMOS admin. Maybe you guys know a solution.

Screenshot #1
Screenshot #2

I am desperate

[Raidin]

tytanick. Is it possible to add the next miner?

SRBMiner Cryptonight AMD GPU Miner
https://bitcointalk.org/index.php?topic=3167363.0

thanks

[BeerMan81]

Is there a comprehensive list of all the supported miners?

[kemo6600]

Is is really CPU problem ? or it crashed on restart ?

^{[ 6891.180275] perf: interrupt took too long (3138 gt; 3128), lowering kernel.perf_event_max_sample_rate to 63500
[16372.804104] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
[16372.804106] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[16372.805108] CPU0: Package temperature/speed normal
[16372.864925] CPU1: Core temperature/speed normal
[266646.523555] perf: interrupt took too long (3936 gt; 3922), lowering kernel.perf_event_max_sample_rate to 50750
[463061.284154] CPU1: Core temperature above threshold, cpu clock throttled (total events = 5501)
[463061.284155] CPU0: Package temperature above threshold, cpu clock throttled (total events = 6079)
[463061.285155] CPU0: Package temperature/speed normal
[463061.348608] CPU1: Core temperature/speed normal
[463128.105916] NVRM: GPU at PCI:0000:08:00: GPU-af74560f-25a5-8145-0cdf-79e4c8a606d8
[463128.105918] NVRM: GPU Board Serial Number:
[463128.105920] NVRM: Xid (PCI:0000:08:00): 62, 110d(7d6c) 00000000 00000000
[463132.265319] NVRM: Xid (PCI:0000:08:00): 31, Ch 00000000, engmask 00000110, intr 10000000
Rig is rebooting due to system error. It could be caused by too much overclock/undervolt.}

[bracinac]

tytanick, is it possible to add button for enable/disable OhGodETHlargmentPill in "actions" column or in group/miner window?

[tytanick]

Update: dashboard v3050
new menu with vote feature pools
telegram notifications now sends statud with icon
fixed Miner program started date
fixed rig list autoreload after doing some action

[preda]

i did tests with this smos,

i mined eth with 1050 ti doing 15.5mh + mb+ cpu + ram all complete sistem was drawing from the wall 105 watt with smos and usb pendrive 16gb
then i used ssd + windows 10 using  claymore 11.7 and mining eth speed 15.8mh and drawing only 78 watt!!!
why smos consuming so much than windows 10?

[tytanick]

i did tests with this smos,

i mined eth with 1050 ti doing 15.5mh + mb+ cpu + ram all complete sistem was drawing from the wall 105 watt with smos and usb pendrive 16gb
then i used ssd + windows 10 using  claymore 11.7 and mining eth speed 15.8mh and drawing only 78 watt!!!
why smos consuming so much than windows 10?

Try using lower dpm stage (powerstage level in OC settings)

[hashestohashes]

The telegram update was the greatest update to ever come across smos, far less checking without a DIY method.

[17men]

Hello friend,

I sent you an e-mail, can you please response? I quit mining, and have a deposit inside smos $15, may i get a refund to 0x71b959C89CA613CCE3d7B3270149D919143C1dff   ?

Thanks

[Sledge0001]

Anyone else having issues with the fan speeds not spinning up and sticking to their minimum speeds? 

I have 2 rigs that seem to be stuck on the minimum fan speed and are heating up considerably as the fan speeds don't seem to be adjusting as one would expect.

I have tried a reboot, different miner software, a newly flashed USB and even deleting the rig and popping a new USB in which just brings back the old settings!!!

Odd....

[preda]

i did tests with this smos,

i mined eth with 1050 ti doing 15.5mh + mb+ cpu + ram all complete sistem was drawing from the wall 105 watt with smos and usb pendrive 16gb
then i used ssd + windows 10 using  claymore 11.7 and mining eth speed 15.8mh and drawing only 78 watt!!!
why smos consuming so much than windows 10?

Try using lower dpm stage (powerstage level in OC settings)

ofc i did tdp 40

[sidscribble]

Anyone else having issues with the fan speeds not spinning up and sticking to their minimum speeds? 

I have 2 rigs that seem to be stuck on the minimum fan speed and are heating up considerably as the fan speeds don't seem to be adjusting as one would expect.

I have tried a reboot, different miner software, a newly flashed USB and even deleting the rig and popping a new USB in which just brings back the old settings!!!

Odd....

What cards, brand and and driver version? Also, what are you using to set the fanspeed? Could be several things going on, depending. Some driver versions had issues with fanspeeds for AMD, and I programed fan curves into the bios of my Tahitis, so something might be overriding youre settings. Also, if you're setting fanspeed in the miner group command line (with your miner args) and its getting overridden elsewhere by SMOS, it could cause this. For example if you have -minfanspeed -maxfanspeed, -tt, -ttli, etc. in Claymore's they may be interfering.

[Sledge0001]

Anyone else having issues with the fan speeds not spinning up and sticking to their minimum speeds? 

I have 2 rigs that seem to be stuck on the minimum fan speed and are heating up considerably as the fan speeds don't seem to be adjusting as one would expect.

I have tried a reboot, different miner software, a newly flashed USB and even deleting the rig and popping a new USB in which just brings back the old settings!!!

Odd....

What cards, brand and and driver version? Also, what are you using to set the fanspeed? Could be several things going on, depending. Some driver versions had issues with fanspeeds for AMD, and I programed fan curves into the bios of my Tahitis, so something might be overriding youre settings. Also, if you're setting fanspeed in the miner group command line (with your miner args) and its getting overridden elsewhere by SMOS, it could cause this. For example if you have -minfanspeed -maxfanspeed, -tt, -ttli, etc. in Claymore's they may be interfering.

Using Claymore V11.7. on GTX 1060's haven't changed anything through SSH. But have tried to set minimum fan speeds but only through the SMOS website / gui...

[sidscribble]

Anyone else having issues with the fan speeds not spinning up and sticking to their minimum speeds? 

I have 2 rigs that seem to be stuck on the minimum fan speed and are heating up considerably as the fan speeds don't seem to be adjusting as one would expect.

I have tried a reboot, different miner software, a newly flashed USB and even deleting the rig and popping a new USB in which just brings back the old settings!!!

Odd....

What cards, brand and and driver version? Also, what are you using to set the fanspeed? Could be several things going on, depending. Some driver versions had issues with fanspeeds for AMD, and I programed fan curves into the bios of my Tahitis, so something might be overriding youre settings. Also, if you're setting fanspeed in the miner group command line (with your miner args) and its getting overridden elsewhere by SMOS, it could cause this. For example if you have -minfanspeed -maxfanspeed, -tt, -ttli, etc. in Claymore's they may be interfering.

Using Claymore V11.7. on GTX 1060's haven't changed anything through SSH. But have tried to set minimum fan speeds but only through the SMOS website / gui...

You might try passing the fanspeed min. argument along with claymore's args. You could use the -ttli argument to make sure temps stay safe while you're trying to figure it out. If there are other software out there to adjust fans for 1060s, maybe give them a shot (or try different/updated or older) drivers. Also, if you've got an infrared thermometer, you might take the temp of the cards and make sure they seem to be reporting correctly. Only other thing I can think of is make sure you're hardware is all straight & you've got enough power going to the rig. As you probably know, low power can cause some strange issues.

[Sledge0001]

Anyone else having issues with the fan speeds not spinning up and sticking to their minimum speeds?  

I have 2 rigs that seem to be stuck on the minimum fan speed and are heating up considerably as the fan speeds don't seem to be adjusting as one would expect.

I have tried a reboot, different miner software, a newly flashed USB and even deleting the rig and popping a new USB in which just brings back the old settings!!!

Odd....

What cards, brand and and driver version? Also, what are you using to set the fanspeed? Could be several things going on, depending. Some driver versions had issues with fanspeeds for AMD, and I programed fan curves into the bios of my Tahitis, so something might be overriding youre settings. Also, if you're setting fanspeed in the miner group command line (with your miner args) and its getting overridden elsewhere by SMOS, it could cause this. For example if you have -minfanspeed -maxfanspeed, -tt, -ttli, etc. in Claymore's they may be interfering.

Using Claymore V11.7. on GTX 1060's haven't changed anything through SSH. But have tried to set minimum fan speeds but only through the SMOS website / gui...

You might try passing the fanspeed min. argument along with claymore's args. You could use the -ttli argument to make sure temps stay safe while you're trying to figure it out. If there are other software out there to adjust fans for 1060s, maybe give them a shot (or try different/updated or older) drivers. Also, if you've got an infrared thermometer, you might take the temp of the cards and make sure they seem to be reporting correctly. Only other thing I can think of is make sure you're hardware is all straight & you've got enough power going to the rig. As you probably know, low power can cause some strange issues.

Yeah I will try the -ttli 80 addition to keep these puppys under 80... Just scary when I see a GPU reading 96C and fan at 38....

Thanks for the tip.


EDIT: Didn't work... That locked the fans in at the minimum set in the gui… Ughhh

[muthu1979]

i did tests with this smos,

i mined eth with 1050 ti doing 15.5mh + mb+ cpu + ram all complete sistem was drawing from the wall 105 watt with smos and usb pendrive 16gb
then i used ssd + windows 10 using  claymore 11.7 and mining eth speed 15.8mh and drawing only 78 watt!!!
why smos consuming so much than windows 10?

Hi,

Can i have OC setting for 1050ti giving 15.5mh

As i am getting only 11.1mh

Regards,
Muthu

[fishyfishy]

Hi All,

I used to mine ETH in December with about 26 Mh/s per card. I switched the rig to mine Cryptonight until few days ago and when I tried switching back to ETH, surprise - maximum 17.5 Mh/s per card!
Anybody has any idea what changed? My cards are having BIOS modded... everything worked ok until now. Cards are RX 570 ASUS Strix 4GB (ROG-STRIX-RX570-4G).
All the time I used simplemining os since the beginning, no change. current version shows 1165

Thanks a lot!

flash SMOS again, probably you have a very old version i guess

Thanks, it did the trick!
After re-flashing with the latest version all cards are back to normal!

[soothaa]

When using xmr-stak:

Code:

[2018-05-05 15:17:56] : HTTPD port is enabled but this binary was compiled without HTTP support!

Why? Please compile these with HTTP support.. it's nice for when we want additional monitoring..