Cryptonite26
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 16, 2018, 12:04:34 AM |
|
|
|
|
|
|
|
According to NIST and ECRYPT II, the cryptographic algorithms used in
Bitcoin are expected to be strong until at least 2030. (After that, it
will not be too difficult to transition to different algorithms.)
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
May 16, 2018, 12:09:44 AM |
|
MSI Z270-A PRO with 7 GPU used to run fine for almost a year. Suddenly yesterday I had ~50 restarts so I tried to figure out what is going on. Didn't find any suspicious change notes so I started to review my hardware. First: It is mining well for about 4-10 minutes then it shows error "gpu fault detected 147" after this error all GPUs still mining for about 10 seconds then instantly reboots with command: "sysrq resetting" which isn't any watchdog of Claymore. What I tried already: reduced OC, increased voltage, different PSU, brand new risers, checked all cables if they are burned or heating up fast (all were fine, healthy and cold) and it's no change. Guys what has happened, have you any suggestions? My script which worked fine for some time looks like this: -wd 1 -r 1 -epool eu1.ethermine.org:4444 -ewal wallet.$rigName -esm 0 -epsw x -allpools 1 -dcri 14 I can almost guarantee you that you have a faulty pci riser. Motherboards have higher quality and solid warranty. PCI risers, have limited warranty and may have been manufactured in the back alleys in Guangdong.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
jarislv
Newbie
Offline
Activity: 4
Merit: 0
|
|
May 16, 2018, 08:12:22 AM |
|
Hi guys, anyone here knows how to successfully program OhGodETHlargement on startup.
Tried editing rc.local, but once miner updates, file gets erased.
Thank you
|
|
|
|
ext
Newbie
Offline
Activity: 3
Merit: 0
|
|
May 16, 2018, 10:10:31 AM |
|
out of nowhere i am getting the Remove dead screens with 'screen -wipe' error
somewhere in this book of 457 pages is the solution i think but before i find i am old and in a weelchair so i hope someone can help me with a answer for this problem.
rig was running fine for a couple of months
a similar problem, appeared a couple of days ago, at 5 rigs. Until now, they worked without errors. on the dashboard it is shown that the rig is digging, but in fact there is froze.
|
|
|
|
grotoc
|
|
May 16, 2018, 11:14:18 AM |
|
MSI Z270-A PRO with 7 GPU used to run fine for almost a year. Suddenly yesterday I had ~50 restarts so I tried to figure out what is going on. Didn't find any suspicious change notes so I started to review my hardware. First: It is mining well for about 4-10 minutes then it shows error "gpu fault detected 147" after this error all GPUs still mining for about 10 seconds then instantly reboots with command: "sysrq resetting" which isn't any watchdog of Claymore. What I tried already: reduced OC, increased voltage, different PSU, brand new risers, checked all cables if they are burned or heating up fast (all were fine, healthy and cold) and it's no change. Guys what has happened, have you any suggestions? My script which worked fine for some time looks like this: -wd 1 -r 1 -epool eu1.ethermine.org:4444 -ewal wallet.$rigName -esm 0 -epsw x -allpools 1 -dcri 14 Strange I had the exact same issue from tuesday. A rig that was working perfectly from months, suddenly reboot every few minutes with these kind of errors. I have removed one of the cards, and now it's more stable. So may be it's indeed a riser issue. No time to check further for now.
|
|
|
|
kseimenov
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 16, 2018, 12:49:23 PM |
|
out of nowhere i am getting the Remove dead screens with 'screen -wipe' error
somewhere in this book of 457 pages is the solution i think but before i find i am old and in a weelchair so i hope someone can help me with a answer for this problem.
rig was running fine for a couple of months
a similar problem, appeared a couple of days ago, at 5 rigs. Until now, they worked without errors. on the dashboard it is shown that the rig is digging, but in fact there is froze. For me the same problem appeared 3 days ago. One of the rigs worked 11 of his last 24 hours mining eth with claymore-eth-v11.7 (or attemps to). The last night i switched to claymore-xmr-v11.3 and there is no problem for 14 hours.
|
|
|
|
NhamTien
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 16, 2018, 01:12:39 PM |
|
Hi team can you add optiminer 1.2 for mining ZeroCoin Equihash 192_7
|
|
|
|
delbarbour
Newbie
Offline
Activity: 72
Merit: 0
|
|
May 16, 2018, 01:28:12 PM |
|
i was wondering what happened with my 2 Rigs the last 2 days - barely booting after 5 restart suddenly, Turned out there was a release !!
for some reason latest release start showing :
[ 88.973154] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1) at page 1867826, read from 'TC4' (0x54433400) (72) [ 88.973618] amdgpu 0000:01:00.0: GPU fault detected: 147 0x00088802 [ 88.974071] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001EF614 [ 88.974520] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02048002 [ 88.974958] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1) at page 2029076, read from 'TC4' (0x54433400) (72) [ 88.975408] amdgpu 0000:01:00.0: GPU fault detected: 147 0x0e004802 [ 88.975856] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001EB48E [ 88.976316] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02088002 [ 88.976774] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1) at page 2012302, read from 'TC6' (0x54433600) (136) [ 88.977253] amdgpu 0000:01:00.0: GPU fault detected: 147 0x04984802 [ 88.977728] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001C293B [ 88.978207] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02088002 [ 88.978679] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1) at page 1845563, read from 'TC6' (0x54433600) (136) [ 88.979507] amdgpu 0000:01:00.0: IH ring buffer overflow (0x000878E0, 0x00008370, 0x000078F0)
---
Then Reboot but doesnt Boot ! 2 Rigs at the same day start doing it on 14/ May - its been working fine since 8 months no change to overlocking or miner versions
|
|
|
|
preda
|
|
May 16, 2018, 02:15:19 PM |
|
Please add Optiminer ZERO 1.2.0 thanks!!!
|
|
|
|
jonny51
Newbie
Offline
Activity: 28
Merit: 0
|
|
May 16, 2018, 03:09:57 PM |
|
i was wondering what happened with my 2 Rigs the last 2 days - barely booting after 5 restart suddenly, Turned out there was a release !!
for some reason latest release start showing :
[ 88.973154] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1) at page 1867826, read from 'TC4' (0x54433400) (72) [ 88.973618] amdgpu 0000:01:00.0: GPU fault detected: 147 0x00088802 [ 88.974071] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001EF614 [ 88.974520] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02048002 [ 88.974958] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1) at page 2029076, read from 'TC4' (0x54433400) (72) [ 88.975408] amdgpu 0000:01:00.0: GPU fault detected: 147 0x0e004802 [ 88.975856] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001EB48E [ 88.976316] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02088002 [ 88.976774] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1) at page 2012302, read from 'TC6' (0x54433600) (136) [ 88.977253] amdgpu 0000:01:00.0: GPU fault detected: 147 0x04984802 [ 88.977728] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001C293B [ 88.978207] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02088002 [ 88.978679] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1) at page 1845563, read from 'TC6' (0x54433600) (136) [ 88.979507] amdgpu 0000:01:00.0: IH ring buffer overflow (0x000878E0, 0x00008370, 0x000078F0)
---
Then Reboot but doesnt Boot ! 2 Rigs at the same day start doing it on 14/ May - its been working fine since 8 months no change to overlocking or miner versions
this happens usually if a riser is faulty or if your OC is to strong.
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
May 16, 2018, 03:19:21 PM |
|
Update v1171 - hotfix - new fanspeed script caused 2mh/s problem in p106/p104 so we reverted this script - fixed case when more then 16 gpus in nvidia caused that OC was not working at all - faster nvidia OC script
|
|
|
|
_johnmuc_
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 16, 2018, 08:16:26 PM |
|
https://image.ibb.co/ik4F3y/error.pngIm getting this error since a few day.. Motherbaord: Gigabyte B250-FinTech GPU: AMD RX 580 8GB I changed OC Setting, running without OC still getting this error..any idea ? Thank you.
|
|
|
|
jakebot
Newbie
Offline
Activity: 21
Merit: 0
|
|
May 16, 2018, 09:00:48 PM |
|
I'm wanting to try SMOS, but I don't want to flash the latest bios on my mobo. If my bios aren't compatible will SMOS even fire up or will it simply crash later on?
It's mostly a suggestion. I have had SMOS running on 10 year old hardware with no issues.
|
|
|
|
|
delbarbour
Newbie
Offline
Activity: 72
Merit: 0
|
|
May 17, 2018, 10:20:07 AM |
|
i was wondering what happened with my 2 Rigs the last 2 days - barely booting after 5 restart suddenly, Turned out there was a release !!
for some reason latest release start showing :
[ 88.973154] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1) at page 1867826, read from 'TC4' (0x54433400) (72) [ 88.973618] amdgpu 0000:01:00.0: GPU fault detected: 147 0x00088802 [ 88.974071] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001EF614 [ 88.974520] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02048002 [ 88.974958] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1) at page 2029076, read from 'TC4' (0x54433400) (72) [ 88.975408] amdgpu 0000:01:00.0: GPU fault detected: 147 0x0e004802 [ 88.975856] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001EB48E [ 88.976316] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02088002 [ 88.976774] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1) at page 2012302, read from 'TC6' (0x54433600) (136) [ 88.977253] amdgpu 0000:01:00.0: GPU fault detected: 147 0x04984802 [ 88.977728] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001C293B [ 88.978207] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02088002 [ 88.978679] amdgpu 0000:01:00.0: VM fault (0x02, vmid 1) at page 1845563, read from 'TC6' (0x54433600) (136) [ 88.979507] amdgpu 0000:01:00.0: IH ring buffer overflow (0x000878E0, 0x00008370, 0x000078F0)
---
Then Reboot but doesnt Boot ! 2 Rigs at the same day start doing it on 14/ May - its been working fine since 8 months no change to overlocking or miner versions
this happens usually if a riser is faulty or if your OC is to strong. Yes i know, usually when u overclock on the Limit, u will have 1 or 2 errors of memory per hour Problem is whenever SMOS sees an error now even if its 1/hour it will reboot directly the rig This was not the behavior before the update !! how can we disable automatic reboot on memory errors
|
|
|
|
preda
|
|
May 17, 2018, 11:56:11 AM |
|
Can you give me some info pls? Optiminer zero 1.2.0 is possible to use? How i can change it?
|
|
|
|
xpulse
Newbie
Offline
Activity: 141
Merit: 0
|
|
May 17, 2018, 12:30:45 PM |
|
Hi Dev team,
Any plans to add Vega RX support?
|
|
|
|
HaberHash
Newbie
Offline
Activity: 115
Merit: 0
|
|
May 17, 2018, 02:19:40 PM |
|
Has anyone noticed weird issues with overclocking in the latest builds?? I have a 1080 ti rig on 1172.
4 - EVGA 1080 ti. OC = Core 120, Memory 100, Power 200.
GPU0 52C 75% | 167.8 Sol/s 187.6 Avg 89.7 I/s | 1.43 S/W 125 W | 0.00 . . GPU1 48C 75% | 722.0 Sol/s 714.1 Avg 378.5 I/s | 3.60 S/W 207 W | 1.50 100 153 GPU2 63C 75% | 168.0 Sol/s 176.0 Avg 88.6 I/s | 1.48 S/W 114 W | 0.49 100 153 GPU3 62C 75% | 686.5 Sol/s 703.9 Avg 376.5 I/s | 3.53 S/W 199 W | 1.62 100 155 ============== | 1744.4 Sol/s 1781.5 Avg 933.3 I/s | 2.51 S/W 647 W | 3.61 100 153 GPU0 52C 75% | 169.1 Sol/s 184.9 Avg 90.5 I/s | 1.41 S/W 137 W | 0.43 100 154 GPU1 48C 75% | 711.3 Sol/s 713.7 Avg 378.7 I/s | 3.59 S/W 193 W | 1.29 100 153 GPU2 62C 75% | 170.1 Sol/s 175.1 Avg 89.9 I/s | 1.47 S/W 115 W | 0.42 100 153 GPU3 63C 75% | 674.0 Sol/s 699.6 Avg 376.2 I/s | 3.52 S/W 197 W | 1.39 100 155 ============== | 1724.5 Sol/s 1773.4 Avg 935.3 I/s | 2.50 S/W 643 W | 3.52 100 153
Reconfiguring OC doesn't really get the other 2 cards working correctly. I can mine other coins and the hash rate it correct across all cards.
|
|
|
|
aenin2764
Newbie
Offline
Activity: 98
Merit: 0
|
|
May 17, 2018, 04:25:25 PM |
|
website so easy for using and smooth, but that mining os need a video introduction for newbie.
|
|
|
|
delbarbour
Newbie
Offline
Activity: 72
Merit: 0
|
|
May 17, 2018, 05:42:19 PM |
|
Has anyone noticed weird issues with overclocking in the latest builds?? I have a 1080 ti rig on 1172.
4 - EVGA 1080 ti. OC = Core 120, Memory 100, Power 200.
GPU0 52C 75% | 167.8 Sol/s 187.6 Avg 89.7 I/s | 1.43 S/W 125 W | 0.00 . . GPU1 48C 75% | 722.0 Sol/s 714.1 Avg 378.5 I/s | 3.60 S/W 207 W | 1.50 100 153 GPU2 63C 75% | 168.0 Sol/s 176.0 Avg 88.6 I/s | 1.48 S/W 114 W | 0.49 100 153 GPU3 62C 75% | 686.5 Sol/s 703.9 Avg 376.5 I/s | 3.53 S/W 199 W | 1.62 100 155 ============== | 1744.4 Sol/s 1781.5 Avg 933.3 I/s | 2.51 S/W 647 W | 3.61 100 153 GPU0 52C 75% | 169.1 Sol/s 184.9 Avg 90.5 I/s | 1.41 S/W 137 W | 0.43 100 154 GPU1 48C 75% | 711.3 Sol/s 713.7 Avg 378.7 I/s | 3.59 S/W 193 W | 1.29 100 153 GPU2 62C 75% | 170.1 Sol/s 175.1 Avg 89.9 I/s | 1.47 S/W 115 W | 0.42 100 153 GPU3 63C 75% | 674.0 Sol/s 699.6 Avg 376.2 I/s | 3.52 S/W 197 W | 1.39 100 155 ============== | 1724.5 Sol/s 1773.4 Avg 935.3 I/s | 2.50 S/W 643 W | 3.52 100 153
Reconfiguring OC doesn't really get the other 2 cards working correctly. I can mine other coins and the hash rate it correct across all cards.
Yes i suddenly start getting memory errors on Rigs that were working fine for months
|
|
|
|
|