gt_addict
|
|
June 25, 2017, 04:39:11 PM |
|
Just started a little ETH hobby mine of a couple of ASUS dual gtx1060-06gb (oc) and set up my little rig with the first card. Ive taken a screen shot and wondered if the settings were ok. Would any of uou guys have suggestions to get more out of it? Thanks
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
June 26, 2017, 08:12:01 AM |
|
Just started a little ETH hobby mine of a couple of ASUS dual gtx1060-06gb (oc) and set up my little rig with the first card. Ive taken a screen shot and wondered if the settings were ok. Would any of uou guys have suggestions to get more out of it? Thanks Try using GPUz and see what memory you have, if its Samsung you could push the memory overclock higher. I would test with zero overclock on the Core and see how high I could push the memory speed and keep it stable, then once its stable with the memory overclock, try pulling back on the power target. Try using MSI Afterburner.
|
|
|
|
gt_addict
|
|
June 26, 2017, 08:15:44 AM |
|
Try using GPUz and see what memory you have, if its Samsung you could push the memory overclock higher. I would test with zero overclock on the Core and see how high I could push the memory speed and keep it stable, then once its stable with the memory overclock, try pulling back on the power target. Try using MSI Afterburner.
Thanks Biffa, i was reading up about using MSI Afterburner but wasnt sure if it was compatible (im a novice). I was pleased i got it set up and mining at all Ill install GPUz and see what it says and post back.
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
jackary
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 26, 2017, 12:47:30 PM |
|
I've got a 6GB 1060 but only get 200kh/s on Neoscrypt - does anyone know why I get such a low hash rate?
|
|
|
|
gt_addict
|
|
June 26, 2017, 07:42:48 PM Last edit: June 26, 2017, 08:27:15 PM by gt_addict |
|
Try using GPUz and see what memory you have, if its Samsung you could push the memory overclock higher. I would test with zero overclock on the Core and see how high I could push the memory speed and keep it stable, then once its stable with the memory overclock, try pulling back on the power target. Try using MSI Afterburner.
Thanks Biffa, i was reading up about using MSI Afterburner but wasnt sure if it was compatible (im a novice). I was pleased i got it set up and mining at all Ill install GPUz and see what it says and post back. Im now running two cards and they are both micron memory. Still using gpu tweak2 and cant figure out how to switch what card im doing the settings on. EDIT: uninstalled GPU TWEAK 2, installed MSI Afterburner and problem solved. I can now adjust cards individually or lock them together . Also i dodnt see anywhere in my motherboard UEFI about enabling 4G. Do i need to do that? Mobo is Asrock Z270 Pro4.
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
preda
|
|
June 27, 2017, 08:06:34 AM |
|
Guys... with the new patch for 1060 nvidia cards of ethminer i am getting about 15/20% more than claymore!!!! And no fee, very cool
I was about 135 on claymore now i am 141/150 mh
|
|
|
|
stna1981
Member
Offline
Activity: 140
Merit: 10
|
|
June 27, 2017, 08:19:52 AM |
|
What patch are you talking about? Source?
|
|
|
|
preda
|
|
June 27, 2017, 09:45:46 AM |
|
|
|
|
|
bkbirge
|
|
June 27, 2017, 02:32:36 PM |
|
I'm getting about 25 MH/s on Eth from a single 1060 using that whereas before I was maxing out at about 22.5 MH/s.
|
|
|
|
rdluffy
Legendary
Offline
Activity: 2394
Merit: 1432
|
|
June 27, 2017, 02:46:57 PM |
|
I'm getting about 25 MH/s on Eth from a single 1060 using that whereas before I was maxing out at about 22.5 MH/s. Very nice, what is your OC settings?
|
| | . .Duelbits│SPORTS. | | | ▄▄▄███████▄▄▄ ▄▄█████████████████▄▄ ▄███████████████████████▄ ███████████████████████████ █████████████████████████████ ███████████████████████████████ ███████████████████████████████ ███████████████████████████████ █████████████████████████████ ███████████████████████████ ▀████████████████████████ ▀▀███████████████████ ██████████████████████████████ | | | | ██ ██ ██ ██
██ ██ ██ ██
██ ██ ██ | | | | ███▄██▄███▄█▄▄▄▄██▄▄▄██ ███▄██▀▄█▄▀███▄██████▄█ █▀███▀██▀████▀████▀▀▀██ ██▀ ▀██████████████████ ███▄███████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ▀█████████████████████▀ ▀▀███████████████▀▀ ▀▀▀▀█▀▀▀▀ | | OFFICIAL EUROPEAN BETTING PARTNER OF ASTON VILLA FC | | | | ██ ██ ██ ██
██ ██ ██ ██
██ ██ ██ | | | | 10% CASHBACK 100% MULTICHARGER | │ | | │ |
|
|
|
bkbirge
|
|
June 27, 2017, 03:09:44 PM |
|
I'm getting about 25 MH/s on Eth from a single 1060 using that whereas before I was maxing out at about 22.5 MH/s. Very nice, what is your OC settings? I've got it, going by memory, at something like: power: 80 fan: auto mem clock: +1000 core clock: +200 The core clock seems to be the most sensitive setting for performance. I'm using a zotac 1060 mini for the card and the precompiled win64 binary for ethminer you can find from that reddit thread. When using these settings it seems to flop between one 19 MH/s for every two 28 MH/s readings so if I understand the display that means an average of around 25 MH/s.
|
|
|
|
rdluffy
Legendary
Offline
Activity: 2394
Merit: 1432
|
|
June 27, 2017, 03:29:52 PM |
|
I'm getting about 25 MH/s on Eth from a single 1060 using that whereas before I was maxing out at about 22.5 MH/s. Very nice, what is your OC settings? I've got it, going by memory, at something like: power: 80 fan: auto mem clock: +1000 core clock: +200 The core clock seems to be the most sensitive setting for performance. I'm using a zotac 1060 mini for the card and the precompiled win64 binary for ethminer you can find from that reddit thread. When using these settings it seems to flop between one 19 MH/s for every two 28 MH/s readings so if I understand the display that means an average of around 25 MH/s. Thanks for sharing I'm using a Galax 1060 6Gb 78 Power Limit +100 CC +500 MC Solid 23Mhs I'll try to up the and then I'll share here
|
| | . .Duelbits│SPORTS. | | | ▄▄▄███████▄▄▄ ▄▄█████████████████▄▄ ▄███████████████████████▄ ███████████████████████████ █████████████████████████████ ███████████████████████████████ ███████████████████████████████ ███████████████████████████████ █████████████████████████████ ███████████████████████████ ▀████████████████████████ ▀▀███████████████████ ██████████████████████████████ | | | | ██ ██ ██ ██
██ ██ ██ ██
██ ██ ██ | | | | ███▄██▄███▄█▄▄▄▄██▄▄▄██ ███▄██▀▄█▄▀███▄██████▄█ █▀███▀██▀████▀████▀▀▀██ ██▀ ▀██████████████████ ███▄███████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ███████████████████████ ▀█████████████████████▀ ▀▀███████████████▀▀ ▀▀▀▀█▀▀▀▀ | | OFFICIAL EUROPEAN BETTING PARTNER OF ASTON VILLA FC | | | | ██ ██ ██ ██
██ ██ ██ ██
██ ██ ██ | | | | 10% CASHBACK 100% MULTICHARGER | │ | | │ |
|
|
|
preda
|
|
June 27, 2017, 03:31:56 PM Last edit: June 27, 2017, 03:57:49 PM by preda |
|
I'm getting about 25 MH/s on Eth from a single 1060 using that whereas before I was maxing out at about 22.5 MH/s. Very nice, what is your OC settings? I've got it, going by memory, at something like: power: 80 fan: auto mem clock: +1000 core clock: +200 The core clock seems to be the most sensitive setting for performance. I'm using a zotac 1060 mini for the card and the precompiled win64 binary for ethminer you can find from that reddit thread. When using these settings it seems to flop between one 19 MH/s for every two 28 MH/s readings so if I understand the display that means an average of around 25 MH/s. I am getting that results with 60% tdp 0+ core 700+ memory I pointed ethminer with ethermine pool and i got very improvements so this is better than claymore.... i would know how to point it on nicehash. Because nicehash just accept own miners. Nicehash recognise differents miners Is out anyway https://github.com/ethereum-mining/ethminer/releases
|
|
|
|
|
candyiman
|
|
June 28, 2017, 12:53:26 PM |
|
I cant run the new eth miner it says i some DLL files are missing
although i use Genoil eth miner I dont get it
|
|
|
|
bkbirge
|
|
June 28, 2017, 12:59:24 PM |
|
I cant run the new eth miner it says i some DLL files are missing
although i use Genoil eth miner I dont get it
You need to download and install the Visual C runtime from Microsoft, version 2015 I think is the one you need.
|
|
|
|
preda
|
|
June 28, 2017, 03:40:23 PM |
|
This is the mine about 140/150 with 6x 1060 and ethermine says 120mh what wrong?🤔
|
|
|
|
mk4y
Newbie
Offline
Activity: 52
Merit: 0
|
|
June 29, 2017, 05:28:59 AM |
|
Hey guys,
quick question for you owners of 1060. which should i buy?
1. 6GB KFA2 GeForce GTX 1060 2. 6GB Asus GeForce GTX 1060 Strix Aktiv PCIe 3.0 x16 (Retail) 3. 6GB Palit GeForce GTX 1060 DUAL Aktiv PCIe 3.0 x16 (Retail) 4. 6GB Gainward GeForce GTX 1060 Phoenix Golden Sample Aktiv PCIe 3.0 x16 (Retail) 5. 6GB ZOTAC GeForce GTX 1060 AMP! Edition Aktiv PCIe 3.0 x16 (Retail)
|
|
|
|
gt_addict
|
|
June 29, 2017, 05:31:16 AM |
|
Ive got asus gtx1060 dual 6g OC Edition and getting 21.5mh each. They have the Micron memory. The zotacs arent great from things ive read on here.
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
PanneKopp
Sr. Member
Offline
Activity: 391
Merit: 250
aka ...
|
|
June 29, 2017, 05:43:28 AM |
|
Hey guys,
quick question for you owners of 1060. which should i buy?
1. 6GB KFA2 GeForce GTX 1060 2. 6GB Asus GeForce GTX 1060 Strix Aktiv PCIe 3.0 x16 (Retail) 3. 6GB Palit GeForce GTX 1060 DUAL Aktiv PCIe 3.0 x16 (Retail) 4. 6GB Gainward GeForce GTX 1060 Phoenix Golden Sample Aktiv PCIe 3.0 x16 (Retail) 5. 6GB ZOTAC GeForce GTX 1060 AMP! Edition Aktiv PCIe 3.0 x16 (Retail)
take the KFA2 (Galaxy) - stable product with solid cooling
|
... please make an educated guess !
|
|
|
|