adaseb
Legendary
 Offline
Activity: 3738
Merit: 1708
|
 |
February 13, 2017, 10:09:23 PM |
|
sincerely to me z and coin does not like it anymore, and was nice at first, and then went to die like all other currencies, and even if senconda coin with the highest price after btc, usd,
You are from Europe right? I think GPU mining is almost dead in Europe, you guys pay like $0.20-0.30 USD/kwh for power I think. |
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
marvykkio
|
|
February 13, 2017, 10:14:10 PM |
|
sincerely to me z and coin does not like it anymore, and was nice at first, and then went to die like all other currencies, and even if senconda coin with the highest price after btc, usd,
You are from Europe right? I think GPU mining is almost dead in Europe, you guys pay like $0.20-0.30 USD/kwh for power I think. yes I am italy  |
|
|
|
|
stealth2600
Newbie
Offline
Activity: 35
Merit: 0
|
|
February 13, 2017, 10:15:10 PM |
|
Yeah Fury needs to be on older drivers...if you have newer ones, then I think V10 is the best, with 395 sol/s. Nice speed increase for 390s and 280x, although after fees its pretty similar to optiminer. Should we expect another update soon ? I have some trouble to get optimum speeds with tongas, optiminer gets better results at 225-230 sol/s so far. Maybe i'm missing something.
I'm also having trouble with Tongas. I'm able to get about 200 sol/s on each of my three R9 380X 4GB, but they are also OCed to 1080/1550, so I was expecting more. When I was using optiminer I was seeing about 225-230 sol/s too (without OC), but it was just to unstable for me, my box would BSOD every 2-3 hours. |
|
|
|
|
|
YIz
|
|
February 13, 2017, 10:15:54 PM |
|
Claymore, can you please add worker address feature in CryptoNote Windows CPU Miner v3.5 for Suprnova ?
Due to lack of time I had to drop support of my old miners: Primecoin, XCN, CPU CryptoNight  Lower hashrates on Fury GPUs. 300H/s from 350H/s.
Make sure that miner shows "ASM" algorithm is used. 15.12 or 16.3.2 drivers are required. Then set "-i 5". I see about 440h/s on my stock Fury. Thanks! 470H/s on Fury X at 1050MHz. |
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
February 13, 2017, 10:20:06 PM |
|
Yeah Fury needs to be on older drivers...if you have newer ones, then I think V10 is the best, with 395 sol/s. Nice speed increase for 390s and 280x, although after fees its pretty similar to optiminer. Should we expect another update soon ? I have some trouble to get optimum speeds with tongas, optiminer gets better results at 225-230 sol/s so far. Maybe i'm missing something.
Yeah I did not concentrate on tonga cards. I can reach 430H/s on stock 390X. Or I can try to add Pascal coin to dual miner, or improve CryptoNight miner. Need to select. |
|
|
|
Q_R_V
Sr. Member
Offline
Activity: 428
Merit: 250
Inactivity: 8963
|
|
February 13, 2017, 10:21:55 PM |
|
I can reach 430H/s on stock 390X. Or I can try to add Pascal coin to dual miner, or improve CryptoNight miner. Need to select.
I vote for Pascal |
|
|
|
|
meeow
Member
Offline
Activity: 72
Merit: 11
|
|
February 13, 2017, 10:25:15 PM |
|
stock 290 - 310 sols (elpida) 290 900/1250 with 390 bios - 335 sols (both hynix and elpida) 290x 900/1250 with 390x bios - 350 sols (hynix) 290x 1000/1250 with 390x bios - 375+sols (hynix) 280/7950 960/1440 - 265 sols furyX 1025/500 - 460+ sols rig: 3x r9 290 900/1250 w/390 bios (-50-62mv) 1x r9 290x 900/1250 w/390x bios (-50mv) unlocked phenom ii x2 (4c) 2gb ddr3, hdd,1 fan for airflow, 970 chipset evga GQ 850w (getting 1kw soon) 920w from the wall, vs 940w for optiminer 16.2, claymore is at least 5% faster after devfee normalization 1350 sol/s isn't bad for 4 290s running on a 850w PSU  |
|
|
|
|
|
Golku
|
|
February 13, 2017, 10:27:20 PM |
|
I can reach 430H/s on stock 390X. Or I can try to add Pascal coin to dual miner, or improve CryptoNight miner. Need to select.
I vote for Pascal Yeah first pascal and then cryptonight would be awesome I guess this miner is maxed right? |
|
|
|
|
woodaxe
Member
Offline
Activity: 129
Merit: 10
|
|
February 13, 2017, 10:28:53 PM |
|
I can reach 430H/s on stock 390X. Or I can try to add Pascal coin to dual miner, or improve CryptoNight miner. Need to select.
I vote for Pascal would like the cryptonight miner improved please |
|
|
|
|
stealth2600
Newbie
Offline
Activity: 35
Merit: 0
|
|
February 13, 2017, 10:29:10 PM |
|
Yeah Fury needs to be on older drivers...if you have newer ones, then I think V10 is the best, with 395 sol/s. Nice speed increase for 390s and 280x, although after fees its pretty similar to optiminer. Should we expect another update soon ? I have some trouble to get optimum speeds with tongas, optiminer gets better results at 225-230 sol/s so far. Maybe i'm missing something.
Yeah I did not concentrate on tonga cards. I can reach 430H/s on stock 390X. Or I can try to add Pascal coin to dual miner, or improve CryptoNight miner. Need to select. I know there probably aren't a ton of people running Tonga cards, but please send a little love our way if you can find some time? I'd greatly appreciate it! Thanks for all your hard work too! |
|
|
|
|
mr.bRxXx
Newbie
Offline
Activity: 17
Merit: 0
|
|
February 13, 2017, 10:32:15 PM |
|
Yeah Fury needs to be on older drivers...if you have newer ones, then I think V10 is the best, with 395 sol/s. Nice speed increase for 390s and 280x, although after fees its pretty similar to optiminer. Should we expect another update soon ? I have some trouble to get optimum speeds with tongas, optiminer gets better results at 225-230 sol/s so far. Maybe i'm missing something.
Yeah I did not concentrate on tonga cards. I can reach 430H/s on stock 390X. Or I can try to add Pascal coin to dual miner, or improve CryptoNight miner. Need to select. Question is - how much can you pull out of Pascal (which is modded sha256) out of current SGMiner speed (which is on other hand, almost full speed at sha256) ? IMHO, it may have some sense on your's (and my too) favourite card - 390/390x, which, in my opinion doesnt get full speed on PASCAL. If it's some 10% or more (or 15-20% on 390/390x), may have some sense to make a miner for it ... b.r. Alex |
|
|
|
|
accar0n
Newbie
Offline
Activity: 40
Merit: 0
|
|
February 13, 2017, 10:39:48 PM |
|
I vote for cryptonight miner please  |
|
|
|
|
|
Hurtman
|
|
February 13, 2017, 10:41:11 PM |
|
I vote for cryptonight miner
|
|
|
|
|
newmz
Sr. Member
Offline
Activity: 372
Merit: 250
The road of excess leads to the palace of wisdom
|
|
February 13, 2017, 10:46:50 PM |
|
Yeah Fury needs to be on older drivers...if you have newer ones, then I think V10 is the best, with 395 sol/s. Nice speed increase for 390s and 280x, although after fees its pretty similar to optiminer. Should we expect another update soon ? I have some trouble to get optimum speeds with tongas, optiminer gets better results at 225-230 sol/s so far. Maybe i'm missing something.
Yeah I did not concentrate on tonga cards. I can reach 430H/s on stock 390X. Or I can try to add Pascal coin to dual miner, or improve CryptoNight miner. Need to select. Why vote for PASCAL? Look at it's trajectory http://coinmarketcap.com/currencies/pascal-coin/compared to XMR (Cryptonight) http://coinmarketcap.com/currencies/monero/Monero, due to its mining stability, lower power consumption, established network, etc is a no-brainer. It's really the only one left for thousands of us who mine in places where power costs are high. Pascalcoin wastes power and makes miners fail often. Please, please, PLEASE develop the cryptonight miner. I think that it has a far higher chance of being utilized by far more people in the longer term. If it wasn't for Monero I would have turned my rigs off a month or two ago as Zcash continues to tank. |
Crypto currency enthusiast and miner since 2015. Mined approx 200 ETH during 2016 and 2017 and sold it at approximately $US40 each. Then I watched it reach $1000+ each. If anyone bothers to read this stuff pay attention to this: HODL HODL HODL HODL HODL HODL
I started mining with 1 AMD 7950 and 1 R9-280X. Then I gradually built my AMD operation into 12 R9-290s. Awesome ETH hash but ridiculous power consumption and heat. Over the last year I defected to the Nvidia team. I now use GTX 1070s. They were expensive to buy (probably a bargain now) but awesome hash rate vs. power consumption. blah blah blah blah
|
|
|
|
Dowper
|
|
February 13, 2017, 10:52:23 PM |
|
sincerely to me z and coin does not like it anymore, and was nice at first, and then went to die like all other currencies, and even if senconda coin with the highest price after btc, usd,
You are from Europe right? I think GPU mining is almost dead in Europe, you guys pay like $0.20-0.30 USD/kwh for power I think. I am in Europe, I pay $0.10/kWh. About the new update: I vote for dual Pascal first, next CryptoNight. |
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
|
February 13, 2017, 10:52:34 PM |
|
Yeah Fury needs to be on older drivers...if you have newer ones, then I think V10 is the best, with 395 sol/s. Nice speed increase for 390s and 280x, although after fees its pretty similar to optiminer. Should we expect another update soon ? I have some trouble to get optimum speeds with tongas, optiminer gets better results at 225-230 sol/s so far. Maybe i'm missing something.
Yeah I did not concentrate on tonga cards. I can reach 430H/s on stock 390X. Or I can try to add Pascal coin to dual miner, or improve CryptoNight miner. Need to select. Yup 390 is faster a bit on CM after some more tests. Pascal Coin as dual mining coin seems nice, but really I would vote for a serious cryptonight miner update. Two reasons, one dual mining uses a lot of power, and summer is coming in a few months Monero on the other hand is super power efficient so far. |
|
|
|
|
fredeq
Legendary
Offline
Activity: 1537
Merit: 1005
|
|
February 13, 2017, 10:53:55 PM |
|
XMR miner update would be great indeed. Lets not kill Pascal yet with dual mining, please  |
|
|
|
Swiped
Member
Offline
Activity: 100
Merit: 10
|
|
February 13, 2017, 11:12:37 PM |
|
Claymore, you kick ass brother. Sped me up from 250 H/s to 300 H/s on Sapphire rx 470 and from 270 H/s to 320 H/s on Sapphire rx 480. I wish ZEC was at something over $40/coin but at least we are on par with other miners out there. This one appears stable as well, so it is appreciated that you took the time you needed to get it right.
|
|
|
|
|
jstefanop
Legendary
Offline
Activity: 2090
Merit: 1396
|
|
February 13, 2017, 11:38:56 PM |
|
Claymore, you kick ass brother. Sped me up from 250 H/s to 300 H/s on Sapphire rx 470 and from 270 H/s to 320 H/s on Sapphire rx 480. I wish ZEC was at something over $40/coin but at least we are on par with other miners out there. This one appears stable as well, so it is appreciated that you took the time you needed to get it right.
Pascal + Eth would be interesting, since its pure SHA so might be able to get some nice numbers. |
|
|
|
|
Lucky - Luciano
|
|
February 13, 2017, 11:39:25 PM |
|
Yeah Fury needs to be on older drivers...if you have newer ones, then I think V10 is the best, with 395 sol/s. Nice speed increase for 390s and 280x, although after fees its pretty similar to optiminer. Should we expect another update soon ? I have some trouble to get optimum speeds with tongas, optiminer gets better results at 225-230 sol/s so far. Maybe i'm missing something.
Yeah I did not concentrate on tonga cards. I can reach 430H/s on stock 390X. Or I can try to add Pascal coin to dual miner, or improve CryptoNight miner. Need to select. Why not make an independent Pascal miner? I am moved my 4800 H/s (ZCash) to Pascal because it more profitable for me. ZCash prices constantly going downhill. |
|
|
|
|
|
