br2459
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 12, 2017, 08:53:52 PM |
|
Is Claymore planning a new release guys?
The miner is already very fast. Difficult to improve speed any more. But it's need to improve stability. Ive had zero problems with stability with the miner itself. The only time something goes wrong it's because of me (oc to much) Keep up the good work claymore! I tried stock frequinces on 270X and 280X. Same result - miner 12.4 unstable. I read this thread - most 280X on 12.4 unstable. This means that 12.4 need to improve stability. I can confirm your findings with 280x, I reverted back to 12.0, now I can run at higher intensity, I don't have to use -r 60 to reset miners due to falling hashrates. I tried the -old 1 but it didn't do it for me. Try 12.2 - for me it gives more speed than 12.0 and stable. Thanks, I concur. About 2% faster, and so far, stable. I have different results actually. My rig that has a 7970 and 280x has been stable for the last 5 days on 12.4 after I backed off the clocks a bit. Granted my 280x has Elpida memory and only can hit 296H/s to be stable.. Just some thoughts.
|
|
|
|
prichina
Newbie
Offline
Activity: 82
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 12, 2017, 09:42:42 PM |
|
12.4 version for the win...you just have to figure it out....ive tested 12.2 and 12.0 ....nothing beats 12.4....im using moded 7970 and 290X ....290X is always on default because i'm having heat issues..it is in my case...but 7970 is doing fine, 1300-1325 on the memory ...and 1125 on the core....The problem with the 12.4 is that it is way to much optimized actually ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) thus is more power hungry...and memory intensive ...that's why you are having stability issues ....you must check ur psu cabling, ur PSU stability....in one word general system stability. 12.0 and 12.2 are more lightly on the system and thats why in general you are thinkig that you are having better results....but, if all is good, 12.4 is the best version. Trust me, i too was having problems at the beginning...done some re-flashing on the bios(es), changing volts on the gpus...frequencys....in the end i found that 7970 works better with 1325 max on memory frequency.....also modded 290X is having problems with higher freq on memory and high -intensity at the same time....back down the intensity settings...i find it -i5 and -6 works ok with 7970 ....for 290X -6 , -7 and -9 (if i'm not on my pc)
|
|
|
|
Xardas2014
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 12, 2017, 10:40:54 PM |
|
~snip~
Jesus Christ dude, use the "insert code" button
|
|
|
|
JuanHungLo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 12, 2017, 11:06:24 PM |
|
I reverted back to 12.2 for ZEC for my 7970's and 280x's and couldn't be happier with 15.12 and BIOS mods from the BIOS mod thread for ZEC mining for Hynix and Elpida.
|
Bull markets are born on pessimism, grow on skepticism, mature on optimism, and die on euphoria. - John Templeton
|
|
|
prichina
Newbie
Offline
Activity: 82
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 12, 2017, 11:15:58 PM |
|
I'm getting 330 h/s in 12.4 with modded 7970
|
|
|
|
sorry2xs
Legendary
Offline
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 03:49:07 AM |
|
|
Please tip the Node 1MPWKB23NsZsXHANnFwVAWT86mL24fqAjF; KO4UX THAT NO GOOD DO GOODER BAT!!!
|
|
|
Etherion
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 05:33:59 AM Last edit: April 13, 2017, 08:54:24 PM by mprep |
|
I get the following error using 12.4 on windows 10 with AMD 15.12 driver. It takes a few days before it happens. I have tested it with flypool also. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fdl.dropboxusercontent.com%2Fu%2F62175175%2FCM12.4.PNG&t=665&c=dqT2P1WG8K3_-Q) start script @echo off set GPU_FORCE_64BIT_PTR 1 set GPU_MAX_HEAP_SIZE 100 set GPU_USE_SYNC_OBJECTS 1 set GPU_MAX_ALLOC_PERCENT 100 set GPU_SINGLE_ALLOC_PERCENT 100 start /ABOVENORMAL ZecMiner64.exe -zpool ssl://zcl.suprnova.cc:4142 -zwal ####.### -zpsw ### -i 9 -a 0 -tt 67 -tstop 90 -mport -3333 -di 57201364 -r 1 -fanmin 80 log file -snip- This happens ever few hour. I really have not idea what is causing the problem. Also the popup stops the detection of it. Any suggestions?
|
|
|
|
prichina
Newbie
Offline
Activity: 82
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 07:08:06 AM |
|
i think etherion is a troll...he is purposely doing this....is there a moderator to give him a warning?
|
|
|
|
Wefud
Newbie
Offline
Activity: 62
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 08:23:48 AM |
|
i think etherion is a troll...he is purposely doing this....is there a moderator to give him a warning?
You can report to moderator.
|
|
|
|
|
redalert11
Newbie
Offline
Activity: 76
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 10:06:41 AM |
|
Hey guys this doesn't seem right. I'm running 2 rx 470s and 1 480. My watt meter says I'm using 580 Watts which seems high for 3 cards. Each card is at 80 watts.
|
|
|
|
newmz
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 372
Merit: 250
The road of excess leads to the palace of wisdom
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 12:28:06 PM |
|
Greetings Mr. Claymore or is it @Claymore?
Anyway - I'm sure this question has been asked before but what are the chances of you producing a CUDA enabled version of you Zcash miner?
I have recently added a Pascal chipset based rig (1 1070 and 2 1060 6GB) and I plan to add more because of the awesome hash vs. power consumption these cards can give me. This is so important in a country where I pay $0.17/kWh.
I'm using your miner on the AMD rigs I have but they are mostly 290s and use ridiculous power compared to the Nvidia rig.
I am seriously considering selling the AMD cards and moving to Nvidia, while I can still get reasonable resale on R9 290 cards.
I notice that you state that your ETH dual miner software is capale of mining with rigs using mixed AMD/Nvidia cards - if I could do that with Zcash mining I would be very happy because I could consolidate and use less Mobos.
I know I could have bought AMD RX cards but at least for Zcash mining I think Nvidia is better, so I am using EWBF or sometimes Excavator.
It would be nice to be able to use your monitoring software to see ALL my rigs and to consolidate the best combinations for motherboards and power supplies.
|
Crypto currency enthusiast and miner since 2015. Mined approx 200 ETH during 2016 and 2017 and sold it at approximately $US40 each. Then I watched it reach $1000+ each. If anyone bothers to read this stuff pay attention to this: HODL HODL HODL HODL HODL HODL
I started mining with 1 AMD 7950 and 1 R9-280X. Then I gradually built my AMD operation into 12 R9-290s. Awesome ETH hash but ridiculous power consumption and heat. Over the last year I defected to the Nvidia team. I now use GTX 1070s. They were expensive to buy (probably a bargain now) but awesome hash rate vs. power consumption. blah blah blah blah
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 12:38:34 PM |
|
As I said before (several times), I'm not going to create ZEC miner for Nvidia.
|
|
|
|
mikecitt
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 01:08:35 PM |
|
where can i find custom bios for club 3d 280x hynix ?
|
|
|
|
UnclWish
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 04:28:16 PM |
|
where can i find custom bios for club 3d 280x hynix ?
You can made it youself. Just search via google "Tahiti bios modding". I can made it for you. Give me your bios rom, I make mod.
|
|
|
|
Famnant
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 04:58:52 PM |
|
where can i find custom bios for club 3d 280x hynix ?
You can made it youself. Just search via google "Tahiti bios modding". I can made it for you. Give me your bios rom, I make mod. It is just change the memory timing. It is less effect now as the new miner use the core a lot.
|
|
|
|
Villadre
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 05:55:24 PM |
|
Giusto can you tell me the hashrate of a stock rx 480 4GB and the hashrate of an overclocked One?And for the rx 470 4gb? Does It mines similiar ti the rx 480 4gb?
Hello, I use 6x the MSI RX470 gaming x 8GB cards. I have a hashrate from 279 sol each cards on zcash mining with ethOS 1.2.0 Total I have a hashrate from 1674 sol. On stock settings this card makes 165 sol My power consumption is for the total system 825 Watt from the wall. (including motherboard). Each card used 130 Watt with overclocking. (Stock is 110 Watt) I use the next settings for overclocking: mem : 1725 core: 1240 I hope this is usefull for you.
|
|
|
|
nikisev
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 266
Merit: 101
Im the very decease you pretend to be
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 06:03:23 PM |
|
Giusto can you tell me the hashrate of a stock rx 480 4GB and the hashrate of an overclocked One?And for the rx 470 4gb? Does It mines similiar ti the rx 480 4gb?
Hello, I use 6x the MSI RX470 gaming x 8GB cards. I have a hashrate from 279 sol each cards on zcash mining with ethOS 1.2.0 Total I have a hashrate from 1674 sol. On stock settings this card makes 165 sol My power consumption is for the total system 825 Watt from the wall. (including motherboard). Each card used 130 Watt with overclocking. (Stock is 110 Watt) I use the next settings for overclocking: mem : 1725 core: 1240 I hope this is usefull for you. 470 at 1180:1750@0.92v makes 278H (v 12.4 could be unstable 12.2 may be better) 480 at 1180:1750@0.92v makes 292H
|
|
|
|
faaty
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 06:11:16 PM |
|
is it wise to mine xmr with a r9 380 nitro 4gb gpu?
|
|
|
|
fittsy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 13, 2017, 06:13:00 PM |
|
is it wise to mine xmr with a r9 380 nitro 4gb gpu?
This thread is about ZCASH not XMR.
|
|
|
|
|