Alehandros
Member
Offline
Activity: 72
Merit: 10
|
|
November 16, 2016, 10:52:16 AM |
|
Claymore Sir!
Some suggestions for your consideration:
1. Having a directory called "Remote Manager" isn't as smart as "Remote_Manager" or "RemoteManager" from a file-path-in-DOS point of view 2. Could we have some sort of debug option for identifying GPUs? I know the indexing can be iffy, if one GPU is under-performing or outright not working, it may be handy to identify the physical GPU. (at the moment I simply set the fan speed of that GPU to high - perhaps you could follow this lead? or have a better idea?)
thanks for the great miner. Alex
|
|
|
|
jonid
|
|
November 16, 2016, 10:59:29 AM |
|
Hello, can anyone recommend me a bios for RX480 nitro 4GB with Hynix memory? I've already tried mods for 1750 and 2000 straps but I can get more than 137 Sol/s..
I use sapphire nitro+ RX480 4gb hynix memory.. I edit the bios (silence mode) using polaris bios editor like this: copied 1500 timings to 1750 & 2000, 1425 to 1625, 1375 to 1425 & 1500.. change the memory setting from 1750 to 1900.. then flashed it with atiwinflash.. reboot.. Now running claymore v6.0 with -i 4 setting.. getting about 153-155 h/s... the average gpu draw power showed in GPU-Z 86.3 W... now still trying to lower GPU voltage using sapphire Trixxx to lower the power usage further... still stable so far... is there any recomended bios edit configuaration for s aphire RX 480 nitro OC 8GB? Temporary i am at stock bios, just downvolt for -100mV. Power around 800w. i will like to lower it to 600w. with bios V3 for ethereum edit i had less then 600w with V3 and claymore miner v5. and i hash around 575 h/s. Stock it was around 630h/s. so any suggestion. Thank you for advice and wish you good mining:) I don't have the 480 8gb.. only the 480 4gb & 470 8gb... I lowered the gpu voltage down to -60 mv using sapphire Trixxx with the above bios setting.. I managed to down gpu draw power to 73.5 watt average without affecting the hashrate:
|
|
|
|
Hotmetal
|
|
November 16, 2016, 11:06:00 AM |
|
5 x RX480:
ZEC - Total Speed: 818.401 H/s, Total Shares: 517, Rejected: 2, Time: 00:10 ZEC: GPU0 164.360 H/s, GPU1 164.098 H/s, GPU2 161.291 H/s, GPU3 164.007 H/s, GPU4 164.646 H/s
So each RX480 is doing ~163.6 rock stable.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
November 16, 2016, 11:10:50 AM |
|
Claymore Sir!
Some suggestions for your consideration:
1. Having a directory called "Remote Manager" isn't as smart as "Remote_Manager" or "RemoteManager" from a file-path-in-DOS point of view 2. Could we have some sort of debug option for identifying GPUs? I know the indexing can be iffy, if one GPU is under-performing or outright not working, it may be handy to identify the physical GPU. (at the moment I simply set the fan speed of that GPU to high - perhaps you could follow this lead? or have a better idea?)
thanks for the great miner. Alex
1. Do you start EthMan from command line? Well, just rename the folder if you don't like its name. 2. "-di detect" option is to detect GPU order. "-tt -100,-1" will set fan 100% for first card. "-tt -1,-100,-1" does the same for second card, etc. You can press "0" key in runtime to disable mining on first GPU to find it (it will be cool after some time). I don't have any better ideas, let me know if you do.
|
|
|
|
jonid
|
|
November 16, 2016, 11:11:12 AM |
|
5 x RX480:
ZEC - Total Speed: 818.401 H/s, Total Shares: 517, Rejected: 2, Time: 00:10 ZEC: GPU0 164.360 H/s, GPU1 164.098 H/s, GPU2 161.291 H/s, GPU3 164.007 H/s, GPU4 164.646 H/s
So each RX480 is doing ~163.6 rock stable.
Wow.. that's cool man! are they the 8gb version or 4gb version? If you don't mind can you share your gpu setting (cclock/memclock, strap bios etc) a little bit?
|
|
|
|
Alehandros
Member
Offline
Activity: 72
Merit: 10
|
|
November 16, 2016, 11:11:44 AM |
|
In some of my rigs with identical cards I've seen the motherboard affect the hashrate...its not always the cards.
|
|
|
|
Alehandros
Member
Offline
Activity: 72
Merit: 10
|
|
November 16, 2016, 11:14:25 AM |
|
Claymore Sir!
Some suggestions for your consideration:
1. Having a directory called "Remote Manager" isn't as smart as "Remote_Manager" or "RemoteManager" from a file-path-in-DOS point of view 2. Could we have some sort of debug option for identifying GPUs? I know the indexing can be iffy, if one GPU is under-performing or outright not working, it may be handy to identify the physical GPU. (at the moment I simply set the fan speed of that GPU to high - perhaps you could follow this lead? or have a better idea?)
thanks for the great miner. Alex
1. Do you start EthMan from command line? Well, just rename the folder if you don't like its name. 2. "-di detect" option is to detect GPU order. "-tt -100,-1" will set fan 100% for first card. "-tt -1,-100,-1" does the same for second card, etc. You can press "0" key in runtime to disable mining on first GPU to find it (it will be cool after some time). I don't have any better ideas, let me know if you do. 1. Sure do! and I do rename it, just cant see the advantage of having a space int eh source .zip. 2. Yeah this is pretty much my workflow, was wondering if you had anything else, perhaps pulsing the target GPU fan on a keypress?
|
|
|
|
daigitinasam
Member
Offline
Activity: 94
Merit: 10
|
|
November 16, 2016, 11:15:24 AM |
|
So according to ethman i see 12000 h/s on my rigs but on coinmine.pl zclassic pool i only see 10k never even seen the hashrate get close to what my rigs actually say
i did not have that issue on pool.mn , could it be a latency issue or is coinmine stealing hashes ?
I have the same problem with coinmine,pl. Always shows less hashrate than my real one. it`s always 20-30% down. I put my rigs on flypool now and hashrates matches. I`ll see how are the payments.
|
|
|
|
Nthused
Legendary
Offline
Activity: 1554
Merit: 1001
|
|
November 16, 2016, 11:18:10 AM |
|
So according to ethman i see 12000 h/s on my rigs but on coinmine.pl zclassic pool i only see 10k never even seen the hashrate get close to what my rigs actually say
i did not have that issue on pool.mn , could it be a latency issue or is coinmine stealing hashes ?
I have the same problem with coinmine,pl. Always shows less hashrate than my real one. it`s always 20-30% down. I put my rigs on flypool now and hashrates matches. I`ll see how are the payments. Shares is what really counts, it could also be due to vardiff settings, other than that coinmine.pl is working good for me with ZCL
|
|
|
|
Hotmetal
|
|
November 16, 2016, 11:28:03 AM |
|
5 x RX480:
ZEC - Total Speed: 818.401 H/s, Total Shares: 517, Rejected: 2, Time: 00:10 ZEC: GPU0 164.360 H/s, GPU1 164.098 H/s, GPU2 161.291 H/s, GPU3 164.007 H/s, GPU4 164.646 H/s
So each RX480 is doing ~163.6 rock stable.
Wow.. that's cool man! are they the 8gb version or 4gb version? If you don't mind can you share your gpu setting (cclock/memclock, strap bios etc) a little bit? Sapphire RX 480 Nitro+ OC 8GB I can upload the BIOS somewhere if you want to play with it. (I don't recommend people use it for all their cards)
|
|
|
|
frappucino
Newbie
Offline
Activity: 15
Merit: 0
|
|
November 16, 2016, 11:37:51 AM |
|
Anybody mining ZCL using claymore through supernova?
|
|
|
|
blue1984
Member
Offline
Activity: 75
Merit: 10
|
|
November 16, 2016, 11:40:46 AM |
|
Anybody mining ZCL using claymore through supernova?
yes it works without problems
|
|
|
|
verjic
Newbie
Offline
Activity: 19
Merit: 0
|
|
November 16, 2016, 11:47:38 AM |
|
I can't download last version 6.0 Servers are overloaded
|
|
|
|
DStefanov
|
|
November 16, 2016, 11:48:08 AM |
|
Anybody mining ZCL using claymore through supernova?
yes it works without problems I confirm that! There are no problems.
|
|
|
|
jonid
|
|
November 16, 2016, 11:49:13 AM |
|
5 x RX480:
ZEC - Total Speed: 818.401 H/s, Total Shares: 517, Rejected: 2, Time: 00:10 ZEC: GPU0 164.360 H/s, GPU1 164.098 H/s, GPU2 161.291 H/s, GPU3 164.007 H/s, GPU4 164.646 H/s
So each RX480 is doing ~163.6 rock stable.
Wow.. that's cool man! are they the 8gb version or 4gb version? If you don't mind can you share your gpu setting (cclock/memclock, strap bios etc) a little bit? Sapphire RX 480 Nitro+ OC 8GB I can upload the BIOS somewhere if you want to play with it. (I don't recommend people use it for all their cards) That's great idea man.. I never flash my card directly with any downloaded bios.rom... I usually just open the downloaded bios.rom file & open my copy bios.rom, compare the value then if everything look right i try to copy the value from downloaded bios to the copy of my bios.rom and flash my card with that copy of my own bios that has been modified .. I understand the rule in any forums.. the risk of taking advice from any forum is completely my own risk.. :-)
|
|
|
|
verjic
Newbie
Offline
Activity: 19
Merit: 0
|
|
November 16, 2016, 11:58:56 AM |
|
Hello, Can anyone please upload last version of claymore on online storage and send me a link in private message? Or send it to me by skype? There is not possible to download form links provided by claymore servers are overloaded Thank you
|
|
|
|
dagarair
|
|
November 16, 2016, 11:59:11 AM |
|
anywhere else to download this? Both sites dont work
|
|
|
|
qqqq
Legendary
Offline
Activity: 1596
Merit: 1011
|
|
November 16, 2016, 12:04:25 PM |
|
I got this error on two rigs in 24 hours WATCHDOG: GPU 6 hangs in OpenCL call, exit WATCHDOG: GPU 6 hangs in OpenCL call, exit WATCHDOG: GPU 7 hangs in OpenCL call, exit WATCHDOG: GPU 7 hangs in OpenCL call, exit But it doesn't have 6 and 7 GPU.
|
|
|
|
Hotmetal
|
|
November 16, 2016, 12:05:07 PM |
|
5 x RX480:
ZEC - Total Speed: 818.401 H/s, Total Shares: 517, Rejected: 2, Time: 00:10 ZEC: GPU0 164.360 H/s, GPU1 164.098 H/s, GPU2 161.291 H/s, GPU3 164.007 H/s, GPU4 164.646 H/s
So each RX480 is doing ~163.6 rock stable.
Wow.. that's cool man! are they the 8gb version or 4gb version? If you don't mind can you share your gpu setting (cclock/memclock, strap bios etc) a little bit? Sapphire RX 480 Nitro+ OC 8GB I can upload the BIOS somewhere if you want to play with it. (I don't recommend people use it for all their cards) That's great idea man.. I never flash my card directly with any downloaded bios.rom... I usually just open the downloaded bios.rom file & open my copy bios.rom, compare the value then if everything look right i try to copy the value from downloaded bios to the copy of my bios.rom and flash my card with that copy of my own bios that has been modified .. I understand the rule in any forums.. the risk of taking advice from any forum is completely my own risk.. :-) https://mega.nz/#!ZsZD2SCQ!BhcscehEz4KuGg7wC0VVRFv6dK6e5b5OZNBcGbd0zFghttps://drive.google.com/open?id=0B3ZBzFE4uqYHU1hkOFpIcEp4OTQ
|
|
|
|
bynapster
Newbie
Offline
Activity: 9
Merit: 0
|
|
November 16, 2016, 12:11:18 PM |
|
hello, Very unstable. OS crashed on rigs. I have the same problem. Win 10,H81-PRO BTC, 6x ASUS RX480 8GB stock rom, Driver 16.11.3 14:49:44:675 ee4 srv bs: 0 14:49:44:675 ee4 sent: 168 14:49:44:956 314 Cannot get Overdrive capabilities for adapter 0 14:49:44:956 314 Cannot get Overdrive capabilities for adapter 6 14:49:44:972 314 Cannot get Overdrive capabilities for adapter 12 14:49:44:972 314 Cannot get Overdrive capabilities for adapter 18 14:49:44:972 314 Cannot get Overdrive capabilities for adapter 24 14:49:44:972 314 Cannot get Overdrive capabilities for adapter 30 14:49:45:738 938 recv: 51 14:49:45:738 938 srv pck: 50 14:49:45:784 938 Cannot get Overdrive capabilities for adapter 0 14:49:45:784 938 Cannot get Overdrive capabilities for adapter 6 14:49:45:800 938 Cannot get Overdrive capabilities for adapter 12 14:49:45:800 938 Cannot get Overdrive capabilities for adapter 18 14:49:45:800 938 Cannot get Overdrive capabilities for adapter 24 14:49:45:800 938 Cannot get Overdrive capabilities for adapter 30 14:49:45:800 938 srv bs: 0 14:49:45:800 938 sent: 168
|
|
|
|
|