Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[jonid]

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?



These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...


I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.


Does anyone have any suggests?

maybe try to put a monitor on this card

Does it have to be a monitor or can it just be a adaptor?  Sure I read earlier in the thread people have been using cheap adaptors from ebay/amazon to help fix this.

For me an adaptator never work only, custom adaptator maybe or dummy plug like this
http://www.ebay.fr/itm/5-PACK-DVI-Graphics-Card-Display-GPU-Detection-Monitor-Dummy-Plug-Adapter-VE-D11-/271595376795?hash=item3f3c58909b:g:4wEAAOSwQYZWzkGt

You know that they talking about RX480 cards...you post link to DVI dummy!?

yes I know, you should check sapphire nitro rx 480 not ref modele
http://sapphirenitro.sapphiretech.com/en/480-8.html

I don't know if hdmi-vga dummy plug will work on rx 480.. but I use old monitor with vga connector & connect it to my sapphire nitro rx 480 4gb with hdmi to vga adapter.. and it works.. i can play game or mining normally..

here's the hdmi to vga adapter i use:
https://www.tokopedia.com/rap-eo/kabel-hdmi-to-vga-female-adapter


maybe we can also make dummy plug with this adapter using resistors like in dvi to vga dummy plug... like this one:
https://www.youtube.com/watch?v=6AwxoIfic4k

[1714666276]

1714666276

[1714666276]

1714666276

[1714666276]

1714666276

[1714666276]

1714666276

[Shizzle my dizzle]

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?

http://imgur.com/e9ufHz7

These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...


I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.


Does anyone have any suggests?

maybe try to put a monitor on this card

Does it have to be a monitor or can it just be a adaptor?  Sure I read earlier in the thread people have been using cheap adaptors from ebay/amazon to help fix this.

For me an adaptator never work only, custom adaptator maybe or dummy plug like this
http://www.ebay.fr/itm/5-PACK-DVI-Graphics-Card-Display-GPU-Detection-Monitor-Dummy-Plug-Adapter-VE-D11-/271595376795?hash=item3f3c58909b:g:4wEAAOSwQYZWzkGt

You know that they talking about RX480 cards...you post link to DVI dummy!?

yes I know, you should check sapphire nitro rx 480 not ref modele
http://sapphirenitro.sapphiretech.com/en/480-8.html

I don't know if hdmi-vga dummy plug will work on rx 480.. but I use old monitor with vga connector & connect it to my sapphire nitro rx 480 4gb with hdmi to vga adapter.. and it works.. i can play game or mining normally..

here's the hdmi to vga adapter i use:
https://www.tokopedia.com/rap-eo/kabel-hdmi-to-vga-female-adapter


maybe we can also make dummy plug with this adapter using resistors like in dvi to vga dummy plug... like this one:
https://www.youtube.com/watch?v=6AwxoIfic4k

Custom dummy plug will not work. The RX470/480 only have DVI-D and the adapter plugs convert DVI-A to VGA.
I recently bought this one and can confirm it works very well http://www.ebay.com/itm/191847993749

[AriesIV10]

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?



These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...


I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.


Does anyone have any suggests?

maybe try to put a monitor on this card

Does it have to be a monitor or can it just be a adaptor?  Sure I read earlier in the thread people have been using cheap adaptors from ebay/amazon to help fix this.

For me an adaptator never work only, custom adaptator maybe or dummy plug like this
http://www.ebay.fr/itm/5-PACK-DVI-Graphics-Card-Display-GPU-Detection-Monitor-Dummy-Plug-Adapter-VE-D11-/271595376795?hash=item3f3c58909b:g:4wEAAOSwQYZWzkGt

You know that they talking about RX480 cards...you post link to DVI dummy!?

yes I know, you should check sapphire nitro rx 480 not ref modele
http://sapphirenitro.sapphiretech.com/en/480-8.html

I don't know if hdmi-vga dummy plug will work on rx 480.. but I use old monitor with vga connector & connect it to my sapphire nitro rx 480 4gb with hdmi to vga adapter.. and it works.. i can play game or mining normally..

here's the hdmi to vga adapter i use:
https://www.tokopedia.com/rap-eo/kabel-hdmi-to-vga-female-adapter


maybe we can also make dummy plug with this adapter using resistors like in dvi to vga dummy plug... like this one:
https://www.youtube.com/watch?v=6AwxoIfic4k

Custom dummy plug will not work. The RX470/480 only have DVI-D and the adapter plugs convert DVI-A to VGA.
I recently bought this one and can confirm it works very well http://www.ebay.com/itm/191847993749

HDMI Dummy Plug (Display Emulator).  This is what I use.  $15.00 on Amazon.

http://a.co/gM0d6Yn

[muleman8]

zec pushing up to 60usd 

[Ursul0]

I'm using these with rx4 and older cards, works fine - http://www.ebay.com/itm/161265341755

[ffthomas]

Zdash (equihash algo) will start today at 9 P.M. (GMT). Suprnova and Coinmine.pl pools are prepared for mining.

More info about Zdash projekt: https://bitcointalk.org/index.php?topic=1688024.0

Maybe it will be one of the other sh*tcoins.. or maybe not. We will see it.

[rpg]

Has anyone intercepted the miner network packets? I have a 480 running at 180 as reported by the miner but as reported by the 24 hour average by the pool the average is 162. I'm switching pools to identify where the thief is. There's about 10 sols missing.

[ByteKingz]

Zdash (equihash algo) will start today at 9 P.M. (GMT). Suprnova and Coinmine.pl pools are prepared for mining.

More info about Zdash projekt: https://bitcointalk.org/index.php?topic=1688024.0

Maybe it will be one of the other sh*tcoins.. or maybe not. We will see it.

Sh*tcoin!

Copy & paste bla bla!

Every Noob will make the best Zero Coin....

No Name Developer, No Cryptography backround -> (Job: Systems Administrator / net consultant), etc.

All Scammer and Noobs!

[GabryRox]

Can someone pinch me, I must be still asleep dreaming...

Yup... and already now back down to almost all-time low lol.  It's beyond me how the ZEC dev team can release with crap Z wallets that i do not believe have been working for even 1 days since its release!  Until they get that fixed I cant see the price of ZEC really increasing at all.  Think about it... why would people invest in a crypto that has has huge functionality issues (with those Z wallets) since day 1?  Luckily, I had set up a "t" wallet from the start through Bittrex but even with that, I lost out big time (relatively). Back around the first week when 1 ZEC was about 1 BTC, I had mined a nominal amount of ZEC.  But, at that time, even the T wallets were not working through Bittrex, so I could not sell the measly .1 ZEC i had mined.  Granted, it only woulda netted me about $70 at the time, but now that same .1 ZEC is worth a laughable $6!  This case is not material dollars but for people with large numbers of rigs, not so immaterial.

[xeridea]

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?



These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...


I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.


Does anyone have any suggests?

maybe try to put a monitor on this card

Does it have to be a monitor or can it just be a adaptor?  Sure I read earlier in the thread people have been using cheap adaptors from ebay/amazon to help fix this.

For me an adaptator never work only, custom adaptator maybe or dummy plug like this
http://www.ebay.fr/itm/5-PACK-DVI-Graphics-Card-Display-GPU-Detection-Monitor-Dummy-Plug-Adapter-VE-D11-/271595376795?hash=item3f3c58909b:g:4wEAAOSwQYZWzkGt

You know that they talking about RX480 cards...you post link to DVI dummy!?

yes I know, you should check sapphire nitro rx 480 not ref modele
http://sapphirenitro.sapphiretech.com/en/480-8.html

I don't know if hdmi-vga dummy plug will work on rx 480.. but I use old monitor with vga connector & connect it to my sapphire nitro rx 480 4gb with hdmi to vga adapter.. and it works.. i can play game or mining normally..

here's the hdmi to vga adapter i use:
https://www.tokopedia.com/rap-eo/kabel-hdmi-to-vga-female-adapter


maybe we can also make dummy plug with this adapter using resistors like in dvi to vga dummy plug... like this one:
https://www.youtube.com/watch?v=6AwxoIfic4k

Custom dummy plug will not work. The RX470/480 only have DVI-D and the adapter plugs convert DVI-A to VGA.
I recently bought this one and can confirm it works very well http://www.ebay.com/itm/191847993749

HDMI Dummy Plug (Display Emulator).  This is what I use.  $15.00 on Amazon.

http://a.co/gM0d6Yn

I use these same ones, they work good.  If you don't have monitor, sometimes can't see temperatures, and some cards for some reason the clockspeeds don't ramp up like they should without monitor, it's weird, and usually you don't need monitor/emulator.  You can get one, and use for multiple rigs, after it is plugged in it usually stays.  Makes remote desktop better also. If you have an APU, you can plug monitor into that, since its an AMD GPU.  It's an oddity of the driver....

[bolt1909]

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?



These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...


I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.


Does anyone have any suggests?

maybe try to put a monitor on this card

Does it have to be a monitor or can it just be a adaptor?  Sure I read earlier in the thread people have been using cheap adaptors from ebay/amazon to help fix this.

For me an adaptator never work only, custom adaptator maybe or dummy plug like this
http://www.ebay.fr/itm/5-PACK-DVI-Graphics-Card-Display-GPU-Detection-Monitor-Dummy-Plug-Adapter-VE-D11-/271595376795?hash=item3f3c58909b:g:4wEAAOSwQYZWzkGt

You know that they talking about RX480 cards...you post link to DVI dummy!?

yes I know, you should check sapphire nitro rx 480 not ref modele
http://sapphirenitro.sapphiretech.com/en/480-8.html

I don't have to check links....I have those cards (11260-01-20G) and on my rigs working only hdmi2vga or hdmi2dvi adapters...

[janos666]

I don't have to check links....I have those cards (11260-01-20G) and on my rigs working only hdmi2vga or hdmi2dvi adapters...

Find some dead HDTV motherboards (from the cheap "untested / not working / sold for parts" category sales, not proper replacement parts). Most of them will have 3 HDMI ports (some might have as much as 5, some might only have a single one but that's rare) which is enough for 3 "rigs" (it's sufficient to have 1 display connected to 1 of the cards per motherboards with Windows>7, I prefer Win10).

[fittsy]

Has anyone intercepted the miner network packets? I have a 480 running at 180 as reported by the miner but as reported by the 24 hour average by the pool the average is 162. I'm switching pools to identify where the thief is. There's about 10 sols missing.

Less than 10% difference between miner and pool and you think it's a thief?

Are you a newb miner? Your profile says that you've been around for awhile. You should know that this is normal. +/- 10% is normal.

[taylub]

Has anyone intercepted the miner network packets? I have a 480 running at 180 as reported by the miner but as reported by the 24 hour average by the pool the average is 162. I'm switching pools to identify where the thief is. There's about 10 sols missing.

When the dev fee connects it does not count towards your sol/s numbers.

[delle54]

Pools don't measure your real hashrate. They do this by counting your average found shares, so sometimes they show a lower or higher rate depending on luck.

[ilia_vs]

someone please explain to me what is the intensity?
try 0 and 4 difference was not found.
a high intensity level you gain more money?
Thenks .
Saphire R7 370 1150/1500.

[SpaceBallsOne]

Does anyone know average H/s & power draw for stock R9 380 4Gb? Miner ver 7.0 ofc.
I found some used ones on sale for cheap, so considering to buy.
Thanks

If you pay for electricity IMO you should not buy them. Too much power consumption for ~120H/s.

I agree.  I have 6 (4 380s, 2 380x)  Both get the same speed for Zcash and eth.

stock clocks in a rig with 4 380s
420 sols/sec zcash v7   650 watts
82mh/sec eth v7.3  800 watts without dual mining

[Ursul0]

Has anyone intercepted the miner network packets? I have a 480 running at 180 as reported by the miner but as reported by the 24 hour average by the pool the average is 162. I'm switching pools to identify where the thief is. There's about 10 sols missing.

Less than 10% difference between miner and pool and you think it's a thief?

Are you a newb miner? Your profile says that you've been around for awhile. You should know that this is normal. +/- 10% is normal.

10% is too much. if no invalids and no downtime I get 3-5% difference

[yatta]

What clock and voltages U use for 7950?

I'm doing 135 h/s with 960/1500 clock with 920mv on 7950
And 170h/s on 280x 1040/1500 with 1019mv on 280x.
Totally around 305 h/s and 375 w usage - whole pc.

[needhelp2]

ZEC: 11/22/16-15:22:54 - New job from equihash.usa.nicehash.com:3357
ZEC - Total Speed: 160.397 H/s, Total Shares: 177, Rejected: 0, Time: 00:17
ZEC: GPU0 160.397 H/s
GPU0 t=72C fan=29%
ZEC: 11/22/16-15:23:04 - New job from equihash.usa.nicehash.com:3357
ZEC - Total Speed: 161.002 H/s, Total Shares: 177, Rejected: 0, Time: 00:17
ZEC: GPU0 161.002 H/s
ZEC: 11/22/16-15:23:06 - New job from equihash.usa.nicehash.com:3357
ZEC - Total Speed: 160.920 H/s, Total Shares: 177, Rejected: 0, Time: 00:17
ZEC: GPU0 160.920 H/s
ZEC: 11/22/16-15:23:13 - New job from equihash.usa.nicehash.com:3357
ZEC - Total Speed: 161.232 H/s, Total Shares: 177, Rejected: 0, Time: 00:17
ZEC: GPU0 161.232 H/s
ZEC: 11/22/16-15:23:18 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (157 ms)!
ZEC: 11/22/16-15:23:23 - New job from equihash.usa.nicehash.com:3357
ZEC - Total Speed: 161.526 H/s, Total Shares: 178, Rejected: 0, Time: 00:17
ZEC: GPU0 161.526 H/s
ZEC: 11/22/16-15:23:25 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (172 ms)!
ZEC: 11/22/16-15:23:28 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (172 ms)!
GPU0 t=72C fan=30%
ZEC: 11/22/16-15:23:33 - New job from equihash.usa.nicehash.com:3357
ZEC - Total Speed: 162.271 H/s, Total Shares: 180, Rejected: 0, Time: 00:17
ZEC: GPU0 162.271 H/s
ZEC: 11/22/16-15:23:37 - New job from equihash.usa.nicehash.com:3357
ZEC - Total Speed: 162.490 H/s, Total Shares: 180, Rejected: 0, Time: 00:17
ZEC: GPU0 162.490 H/s



Anyone seen this behavior  the miner is being flooded with new jobs faster than it can produce shares almost