Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[markosvaba]

I have this problem too. But I have internet speed 50mbps... My card is not overclocked. I have 5x 470 nitro
http://prnt.sc/d89cum

[hectordsd]

i have a problem with the zecminer, it stopped working apparently because gpu2 failed, i need to force close it and reopne, this happens like each 3 hours of conection, someone any idea?

[RidgyDidge]

Thank you for this miner!!

Can someone tell me if my values are normal?

I'm using 2 GPU's (GPU 0: R9 380X 4GB, GPU 1: R9 270 2GB), my CPU is a FX 6300 stock mining with 4 threads, using ~80%. I'm using -i 2 for both cards. My MB is a 970A-SLI-Krait-Edition.

My values are:

GPU 0 (380X): 44 H/s
GPU 1 (270): 41 H/s

My 280x GPU is seeing between 65-70+ sol/s with the claymore's 4.0 AMD miner on stock clock/memory and -i 0

Ever since the Claymores v6 GPU miner came out I have been getting 120-124 sol/s on average on my 280x with stock clock/memory and bios with the "now default" -i 4 and it runs stable as anything, I'm even considering getting another 280x since I can get one cheaper than normal at this point in time.

[rockzhou8]

when will it add proxy function?

[sorry2xs]

when will it add proxy function?

that would be nice

[Tmdz]

i have a problem with the zecminer, it stopped working apparently because gpu2 failed, i need to force close it and reopne, this happens like each 3 hours of conection, someone any idea?

What gpu?

I noticed this miner restarts the gpus A LOT, it has watch dog function for that but it seems too often.

My 290s are not the most stable gpus either so it can cause problems.

[delle54]

My values are:

GPU 0 (380X): 44 H/s
GPU 1 (270): 41 H/s

Try stopping CPU-Miner.

[sirslayer]

very good article about Claymore's software on this website!!

http://cryptomining-blog.com/

[Chuck_Norris]

With my rx470-8gb nitro i get 164 Sol's per card

[qqqq]

6xR9 380 periodically resets GPU0 speed, and the miner errors appear non-existent cards, with which it can be connected?

It's a bug, will be fixed in next update. Divide card number by 2.

How soon will be next update ?

Do you want more speed?

I got 4x480 on some of my rigs and one GPU shows 0 but with load 100% and heat. This is not so good, right ? I guess everyone wants more speed or what do you mean ?

1. It's strange and can be related to some hardware problem.
2. You will be surprised, but not all people want more speed, though it puts CPU botnets to nowhere.

1. I think you right.
2. Actually what about me, a want more speed without extra heat and power consumption only by improved algo))) But seriously i like your miners since XMP. Good job, thank you!

i have a problem with the zecminer, it stopped working apparently because gpu2 failed, i need to force close it and reopne, this happens like each 3 hours of conection, someone any idea?

I got same issue with one of 6 rigs (4xRx480 with memory timings from 1500). One GPU showed memory errors, you can check this by https://www.hwinfo.com/download.php and hang the whole rig. I flashed that one with 1625 strap. The errors are gone but that one GPU shows 0 hashes after one hour or so. All GPU's was - 96mv and 1100/1975 Mhz and i set for that -88mv so 5 hours still ok. Sorry for my english)

The other rigs with mixed R9 290, Nano and RX 470, 480 is ok.

[_ZET_]

Tested and verified.

The most advance and stable miner for Windows. Undoubtly the winner.

Only linux's miner may be competitive.

[klondike_bar]

after 24hrs, im getting pretty good numbers

3x R9-270X (sapphire) @ ~72Sol/s
2x RX-470 (MSI 4GB) @ ~144Sol/s
Theoretical = ~500Sol/s
Actual (nicehash) = ~473Sol/s

thats pretty damn close, about 5% less than the miner indicates. Assuming the 2.5% fee, thats within 2.5%

[philipma1957]

Has anyone done any watts per h tests.

I have five rigs one of them is doing. 375 h for 299 watts.

This is about .8 watts per h.

This is at the wall with a kwatt.

Clay 6.

It is,under volted and under clocked.

But 375 h for 299 watts

Vs 415 h for 375 watts

The better watts per gh is via msi and stock bios.

The worse watts per gh is stock settings on msi and stock bios.

I think .8 watts a H/s

[Mastker]

i have a problem with the zecminer, it stopped working apparently because gpu2 failed, i need to force close it and reopne, this happens like each 3 hours of conection, someone any idea?

What gpu?

I noticed this miner restarts the gpus A LOT, it has watch dog function for that but it seems too often.

My 290s are not the most stable gpus either so it can cause problems.

Same here. So I just reduce the frequency or raise the voltage. That makes the cards more stable and less restart.

[ayiphelmy]

Good Job Man!!!!!
windows screen capture

How are you keeping your temps that low, my 390x sits at 93c

93 is too high I'm using -tstop on 80
try cleaning them from dust maybe it'll help
also considering that V5 was way cooler than v4 and v6 is same as v5, I can't imagine what temps will you get on mining ETH

here are mines

still cold until now

so jealous of your temps, i only have one 390x the rest are 270x and 280x. will probably remove the blackplate to see if it helps

I have a quite big air vent and windows slightly open and what I observed is which miners are close to window have higher temps then others. I think it's all about dust, I'm going to clean them maybe this weekend so I'll post what will happen next..

air flow is the point..... u must have good room temp to make gpu cold that's all

[markus124]

How i can move to coinmine? what type to config? I create acc on coinmine, i use adress from poloniex or? I create account and work account. How to connect coinmine and poloniex?

I use this:

ZecMiner64.exe -zpool zec.coinmine.pl:7007 -zwal markosvaba.markosvaba -zpsw "mypassword"

this looks fine and u have to set ur zec address in "my account" - "edit account" and withdraw ur coins once they get confirmed.

[markosvaba]

tnx, but i cannot to connect? I received messages pool removed from list

http://prntscr.com/d8bx3k

coinmine.pl

http://prntscr.com/d8bxho


is this okey or?

-zpool zec.coinmine.pl:7007 -zwal markosvaba.markosvaba -zpsw "mypassword"

[jonid]

Measure time between "DevFee: start mining" and "DevFee: stop mining and disconnect" strings. It's always 90sec.

I do this every time the purple text appears since 2 days. Maybe I interpret something wrong. You are the "boss" (and a very good one).

Ok I'll make these lines purple too so you can see it.

Do you want more speed?
[/quote]

ABSOLUTELY YESSS!!!

maybe some other people dont want more speed..it's no problem... for them, they can use the versions with less speed (previous versions) ... don't worry about them man..

you have a great talent in this field. USE IT!

[atithasos]

tnx, but i cannot to connect? I received messages pool removed from list

http://prntscr.com/d8bx3k

coinmine.pl

http://prntscr.com/d8bxho


is this okey or?

-zpool zec.coinmine.pl:7007 -zwal markosvaba.markosvaba -zpsw "mypassword"

At coinmine site you have not enter a password to your worker put an x
when you execute the miner use also
-allpools 1

[markosvaba]

Atithasos

http://prntscr.com/d8cl5d