manoe
Newbie
Offline
Activity: 51
Merit: 0
|
|
November 23, 2016, 07:12:16 AM |
|
I just bought a V3, solder is fucked up... Returning and buying the V6 Link to these risers? http://www.ebay.com/itm/182293910222This is where i bought mine from, they come from Texas (USA) so shipping is fast in the USA. Also a good one mainly for the USA much faster for his shipments than the other one sometimes can last 15-30 days
|
|
|
|
|
|
TalkImg was created especially for hosting images on bitcointalk.org: try it next time you want to post an image
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
bitpazari
|
|
November 23, 2016, 07:19:10 AM |
|
My 480 rig loses ~170 sol/s at the pool, but my 470 rig reports very accurately without fluctuation. The Pitcairn cards are definitely very efficient for zcash, but I cannot explain the pool flucuations.
|
|
|
|
orbital_station1
Newbie
Offline
Activity: 24
Merit: 0
|
|
November 23, 2016, 07:25:09 AM |
|
What Windows are you guys using? 7 or 10? Which one gives more H/s?
|
|
|
|
denis1995
|
|
November 23, 2016, 07:36:13 AM |
|
Is ZEC more profitable than ETH?
not anymore, it's way lower, assuming a rig of 1000(6 x 480)sol versus the same rig that do 180MH it's 0.002 worst, conusmption is also higher i guess or on par What bios/settings r u using to get 180MH from your rig? I have low power bios and have 170mh, on this 180mh was unstable. Is all fine on your rig? The question you should be asking is, what is his hash per watt. You can crank up the speed but you exponentially use more power. I have free electricity, so for me more important is MH/S How free? Solar panel?
|
|
|
|
d57heinz
Legendary
Offline
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
|
November 23, 2016, 08:30:24 AM |
|
I haven't had an issue with them, maybe with another miner or the first few versions of claymore, but I see no difference. at least with powered USB risers. I think latest v7 is pulling more thru the risers also we saw the user with fried mobo. This can't be no coincidence. Maybe someone could run a ammeter on the 12 v supplying the riser? Looks like the cards are exceeding the pcie limit. I too in the last week have fried a riser after mining many months on eth Rx 480 rig. Burnt riser was on xfx Reference card with +10% powlimit BR
|
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
Havane
Jr. Member
Offline
Activity: 76
Merit: 3
|
|
November 23, 2016, 09:05:52 AM |
|
Does anyone know which is stable downvolt for SAPPHIRE RX480 NITRO OC + for 1342 MHZ GPU and 2000 MHZ for memory?
I'm ok with -100 mv
|
|
|
|
dumpida
|
|
November 23, 2016, 09:50:25 AM |
|
@Claymore, in the share rejected display, can you also display which GPU's share is rejected? So that we can adjust the GPU accordingly.
|
| Emporium. Finance | ▐ | . ▌ | Decentralized Peer-to-Peer Marketplace and DeFi Liquidity Mining Platform | ▲ | . ● | ▄▄█▀▀██▀██▀▄▄ ▄███▀██▀▀▀▀▀ ▄▄ ▀ ▄█▀▄█▄ ▄▄▄▄▄ ▀ ▀██▄███▄ ▄██████▄ ▄▄██████▄ ███████▌ ▄███████████ █████████▄ ▀█▄████████████ ███████████▄▄▄▀▀▀▀▀████████ ▀█████████████▀ ▀▀████▀ ▀████████████▄ ██▀ ▀████████████▌ ▄▄██▀ ▀██████████▌ ▄███▀ ▀▀██████ ▄█▀▀ | Available in +125 Countries | | | ▄███▄ █████ ▀███▀ ▄▄▄ ▄█████▄ ▄▄▄ █████ ███████ █████ █████ ███████ █████ ▄███▄ ▄███▄ ███████ ███ ███████ ███████ ██▄█████▄██ ███████ ▀▀▀▀▀▀▀ ███▀ ▀███ ▀▀▀▀▀▀▀ ███▄ ▄███ ██▀█████▀██ ███ | Community Governance System | | | ▄▄██████▄▄ ▄▀▄ ▀▀▀ ▄██▄ ▀██ ▄██▄ ▄█ ▄██ ▀▀███▄ ▄███ ▄██ ▀█▄ ███ ▄██ ▀ ▄███ ▄██ ▄▄ ▀███ ▄██ ██▀ ███ ▄██ ▄████ ▄██ ▄█████████▄ █ ▀▀ ▄▄▄█████ █▀ ████ ▄▄██▀▀██▀ ███▄ ▄███ ▄██████████████████████ | Liquidity Mining Platform | ◆ | . ▌ | | | ▌ |
|
|
|
draxy
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 23, 2016, 10:25:14 AM |
|
I have a rig with 6 x sapphire nitro+ oc rx 480 8gb cards and using a modded bios from eth I am getting: - 1000h/s for about 910w at the wall Can we get more h/s from this gpu and less power draw?
I have the exact same cards, 7 of them in 1 rig. 1050H/s 780 Watts at the wall. You need to underclock and undervolt. I have now with modded bios from eth gpuclk 1150 memclk 2150, gpu core voltage -100mv 6 x rx480 - 930h/s - power draw at the wall 700w If I try to lower gpu or mem clock I get hashrate drop
|
|
|
|
Xardas2014
|
|
November 23, 2016, 10:26:39 AM |
|
Does anyone know which is stable downvolt for SAPPHIRE RX480 NITRO OC + for 1342 MHZ GPU and 2000 MHZ for memory?
I'm ok with -100 mv I use a modded bios(which I have posted) and 1125/2080 -100mv works well even with a monitor attached. About 152 sol/s but is only like 55 watts.
|
|
|
|
Zied RF
Newbie
Offline
Activity: 29
Merit: 0
|
|
November 23, 2016, 10:29:30 AM |
|
Hello, Did anyone modded BIOS of R9 380 to rise the hashrate for ZEC? At his moment I use this modded BIOS: https://bitcointalk.org/index.php?topic=1620733.0 , which is good for ETH ( I get 23.8 MHS stable ), but on ZEC I just get about 125 H/s from 118 H/s with standart BIOS. I did not find any thread where someone did hack R9 380 BIOS to get high hashrate on ZEC. If anyone know, please point me. Thank You! Hello can i use this bios for asus r9 380 ??
|
|
|
|
ffthomas
|
|
November 23, 2016, 10:36:49 AM |
|
What Windows are you guys using? 7 or 10? Which one gives more H/s?
Win 8.1 For more than 5 cards in 1 mobo you need to install Win 10.
|
|
|
|
draxy
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 23, 2016, 10:40:14 AM |
|
Does anyone know which is stable downvolt for SAPPHIRE RX480 NITRO OC + for 1342 MHZ GPU and 2000 MHZ for memory?
I'm ok with -100 mv I use a modded bios(which I have posted) and 1125/2080 -100mv works well even with a monitor attached. About 152 sol/s but is only like 55 watts. @Xardas2014 mind to share again the modded bios?
|
|
|
|
katak
Member
Offline
Activity: 100
Merit: 10
|
|
November 23, 2016, 10:59:58 AM |
|
Hello,
Can we use mining rig rentals on this miner ? : )
Thx
|
|
|
|
nowaltcoin
|
|
November 23, 2016, 11:14:45 AM |
|
What Windows are you guys using? 7 or 10? Which one gives more H/s?
Win 8.1 For more than 5 cards in 1 mobo you need to install Win 10. Hi that is not correct ! I'am using Win 8.1 with 6 Cards ! Thats working with a driver patch ! Have a nice day
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
PsychoDrake
Newbie
Offline
Activity: 15
Merit: 0
|
|
November 23, 2016, 11:20:14 AM |
|
why is the config file changing to this? is the 4time this appens...
-zpool eu1-zcash.flypool.org:3333 -zwal t1QBdF2yimDubPeg2BsWCme843GegCWWifK.msi1
|
|
|
|
ghostfaceuk
|
|
November 23, 2016, 11:22:36 AM |
|
why is the config file changing to this? is the 4time this appens...
-zpool eu1-zcash.flypool.org:3333 -zwal t1QBdF2yimDubPeg2BsWCme843GegCWWifK.msi1
There is someone using open ports to upload their own config file to have the miner work for them. either use -mport 0 to stop this or -mport -3333 to make it view only if you really need to monitor the rigs Whoever this person is they seem to have been getting decent payouts of 0.01 ZEC at flypool in time frames ranging from 30 mins to two hours. http://zcash.flypool.org/miners/t1QBdF2yimDubPeg2BsWCme843GegCWWifK/payouts
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
November 23, 2016, 11:23:00 AM |
|
It seems in next update I will make "-mport -3333" by default instead of current "-mport 3333", so miner will use "read-only" mode by default for remote management.
|
|
|
|
PsychoDrake
Newbie
Offline
Activity: 15
Merit: 0
|
|
November 23, 2016, 11:28:53 AM |
|
It seems in next update I will make "-mport -3333" by default instead of current "-mport 3333", so miner will use "read-only" mode by default for remote management.
Thanks i will change to -mport -xxxx
|
|
|
|
doktor83
|
|
November 23, 2016, 11:33:12 AM |
|
time for V8 Claymore!
|
|
|
|
Assaro
Member
Offline
Activity: 114
Merit: 10
|
|
November 23, 2016, 11:34:05 AM |
|
It seems in next update I will make "-mport -3333" by default instead of current "-mport 3333", so miner will use "read-only" mode by default for remote management.
yep, good idea, many are having the issue that some1 is changing the miner settings and stealing this way the hash power..... BTW, a big thanks to your work, really appreciate it and gladly pay for your work 2,5% fee... hope it works well for you same as for us.... GL
|
|
|
|
|