Stealth8368
|
|
November 17, 2016, 09:09:44 AM |
|
I have removed my ether strapped bios from my cards since Claymore 5 release as I will tune my cards when I no more what best settings will be,with each new release cards are under more stress and I believe using ether mods will not be best for zcash mining,I am getting 159 to 164H/s with my 480 8G nitros and same with my xfx 480 8G GTR but the xfx run cooler in same conditions,xfx are just great with cooling,all have Samsung memory and -60 core with 1340 clocks memory 2100 I believe power usage will be around same as what ether is when cards are maxed out and miner is optimised
|
|
|
|
uninexus
Newbie
Offline
Activity: 27
Merit: 0
|
|
November 17, 2016, 09:28:48 AM |
|
Hey Claymore, Discovered a disturbing issue with one of my machines. It has happened twice now - at first I thought it was a glitch. My config file appears to have been over-written remotely - only the t address has been replaced to allow mining to a different address. I don't believe that is your development fee ;-) Here is the address in question on http://zcash.flypool.org/: t1LkBCiHBkoKocxEDrQXTnhWo1TuhVhys9J Only one of my systems is exposed and the issue (exploit?) has happened on that one only. From the log: 23:45:58:250 20d0 Remote management: file config.txt was downloaded 23:45:58:250 20d0 srv bs: 0 23:45:58:250 20d0 sent: 40 ... 23:46:00:849 2528 recv: 50 23:46:00:849 2528 srv pck: 49 23:46:00:865 2528 Remote management required restart ... 23:46:01:917 2528 Restarting OK, exit... Do we have a sneaky attacker using a way to mine for himself /herself ? Tell me I am not going crazy here. I need to secure it.
|
|
|
|
yarikss
|
|
November 17, 2016, 09:29:30 AM |
|
Earnings fell to ZEC, 7 version of miners urgently need )
|
|
|
|
gross
|
|
November 17, 2016, 09:30:54 AM |
|
6xR9 380 periodically resets GPU0 speed, and the miner errors appear non-existent cards, with which it can be connected?
It's a bug, will be fixed in next update. Divide card number by 2. How soon will be next update ? Do you want more speed? I got 4x480 on some of my rigs and one GPU shows 0 but with load 100% and heat. This is not so good, right ? I guess everyone wants more speed or what do you mean ? 1. It's strange and can be related to some hardware problem. 2. You will be surprised, but not all people want more speed, though it puts CPU botnets to nowhere. optimate 75->85% power usage current ZECminer
|
|
|
|
jonid
|
|
November 17, 2016, 09:35:44 AM |
|
Earnings fell to ZEC, 7 version of miners urgently need )
I totally completely absolutely definitely AGREE WITH YOU MY FRIEND!
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
November 17, 2016, 09:37:38 AM |
|
Hey Claymore, Discovered a disturbing issue with one of my machines. It has happened twice now - at first I thought it was a glitch. My config file appears to have been over-written remotely - only the t address has been replaced to allow mining to a different address. I don't believe that is your development fee ;-) Here is the address in question on http://zcash.flypool.org/: t1LkBCiHBkoKocxEDrQXTnhWo1TuhVhys9J Only one of my systems is exposed and the issue (exploit?) has happened on that one only. From the log: 23:45:58:250 20d0 Remote management: file config.txt was downloaded 23:45:58:250 20d0 srv bs: 0 23:45:58:250 20d0 sent: 40 ... 23:46:00:849 2528 recv: 50 23:46:00:849 2528 srv pck: 49 23:46:00:865 2528 Remote management required restart ... 23:46:01:917 2528 Restarting OK, exit... Do we have a sneaky attacker using a way to mine for himself /herself ? Tell me I am not going crazy here. I need to secure it. It's a good idea to read Readme and use "-mport 0" or at least "-mport -3333" if you think that you can be attacked via remote management port.
|
|
|
|
uninexus
Newbie
Offline
Activity: 27
Merit: 0
|
|
November 17, 2016, 09:53:07 AM |
|
I didn't realize that the software allows remote upload of the configuration file in the default configuration... Ouch. I have set the port to read only and changed it to a different number.
It may be a good idea to advise users in the next version of the readme file that such an exploit exists...
Thanks,
|
|
|
|
golden0707
|
|
November 17, 2016, 09:54:10 AM |
|
Hello and thank for your work,
I have two rigs with claymore v6, 385+h/s each = 770 H/s DevFee 2.5 then average hashrate must be 770x0.95 = 750 but 6h average on pools is about 706 H/s
We are loosing 5% in devefee process or in some place. (v.6 shows 0 rejected on both rigs, great job!!)
Similar with claymore v5 and other pools (tried zcash nicehash and nanopool) Maybe you can fix or it. Thank you
Same here. Got two rigs with ~850 sol/s rate . But on nanopool its reporting ~780 within 12 hrs. And that was noticed long ago. Dont know why is that. Any ideas ? 0 reject. BR. yeah something is def up with the reported hash rates Well, anyone who cares.... worked for 24+ hr. on flypool , from actual 720 sol/s from rig - minus devfee (2.5%) = 702 sol/s . That is real close to what i see on site ( 685 sol/s)
|
|
|
|
atithasos
|
|
November 17, 2016, 10:12:25 AM |
|
Fix the config file one per line and not all in the same line
|
BTC: 18Kz4PHHNaRndxUhsCU6wWSpNjkucPuF7S
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
November 17, 2016, 10:15:07 AM |
|
I didn't realize that the software allows remote upload of the configuration file in the default configuration... Ouch. I have set the port to read only and changed it to a different number.
It may be a good idea to advise users in the next version of the readme file that such an exploit exists...
Thanks,
Ok, I'll add a warning in next update, in both readme and miner itself.
|
|
|
|
Hotmetal
|
|
November 17, 2016, 10:19:13 AM |
|
I didn't realize that the software allows remote upload of the configuration file in the default configuration... Ouch. I have set the port to read only and changed it to a different number.
It may be a good idea to advise users in the next version of the readme file that such an exploit exists...
Thanks,
Ok, I'll add a warning in next update, in both readme and miner itself. The majority of people will never use it and since it doesn't have any type of authentication, isn't it better to have it turned off by default?
|
|
|
|
arielbit
Legendary
Offline
Activity: 3416
Merit: 1059
|
|
November 17, 2016, 10:27:20 AM |
|
maybe it would be better if claymore release two versions of the miner..
1. best hash per watt ratio for efficiency
2. the best hash a card can get, without considering the power consumption
some people have cheap electricity, they can benefit from no. 2...the other miners would benefit from no. 1
|
|
|
|
bmtrader
Newbie
Offline
Activity: 31
Merit: 0
|
|
November 17, 2016, 10:27:45 AM |
|
Hi there, after returning from zcash to eth I get "OpenCL error -4 (0) - cannot create DAG on GPU" for all 2G gpus - restart, power off - nothing helps - any idea someone?
|
|
|
|
PandaPanda!
Newbie
Offline
Activity: 35
Merit: 0
|
|
November 17, 2016, 10:29:32 AM |
|
@Claymore, could you please make some adjustments to your ethmon monitoring software? Since moving to zec mining, the only units i've been able to use is KH/s and MH/s. While this may not seem like a bad thing, there is a problem. Let me explain. When one of my GPUs crashes and is mining at 0H/s, the rest of the rig is still running. The problem is that when I set my target hash rate, it doesn't warn me if i've lost a GPU because of the units used. Could you add an H/s unit to the software, so that it can warn me if theres a 50H+ difference in the rig's total hash rate? Thanks
|
|
|
|
gaato77
Newbie
Offline
Activity: 37
Merit: 0
|
|
November 17, 2016, 10:30:25 AM |
|
hi guys
can someone help me with my new RX480 8GB..
Screen of whattman configuration? for stable overclocking
Thanks
|
|
|
|
stanis_r
Newbie
Offline
Activity: 17
Merit: 0
|
|
November 17, 2016, 10:32:27 AM |
|
witch intensity do you use for RX 480 8GB mod-ed with 1500 Hz timing for 2080 Hz VRAM ?
|
|
|
|
idonothave
|
|
November 17, 2016, 10:48:32 AM |
|
linux version?
|
|
|
|
Hotmetal
|
|
November 17, 2016, 10:53:33 AM |
|
linux version?
1st page: There are builds for Windows x64 only. No Linux. No 32-bit support. No NVidia support.
|
|
|
|
breakrules
Newbie
Offline
Activity: 5
Merit: 0
|
|
November 17, 2016, 10:58:27 AM |
|
I have removed my ether strapped bios from my cards since Claymore 5 release as I will tune my cards when I no more what best settings will be,with each new release cards are under more stress and I believe using ether mods will not be best for zcash mining,I am getting 159 to 164H/s with my 480 8G nitros and same with my xfx 480 8G GTR but the xfx run cooler in same conditions,xfx are just great with cooling,all have Samsung memory and -60 core with 1340 clocks memory 2100 I believe power usage will be around same as what ether is when cards are maxed out and miner is optimised
Hi Can you post what is your settings in .bat or config.txt TNX
|
|
|
|
denis1995
|
|
November 17, 2016, 11:02:20 AM |
|
Please with the new version change also the name of thethread with (Only Windows) because 70% of the post are "where to doenload the linux version"
And if you can with your next version to boost again the hashrate with the same power will be awesome. Thanks.
|
|
|
|
|