Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[shadabahmed]

i am facing this problem

http://i64.tinypic.com/j9pw02.jpg

check out GPU1 H/S

i tried fresh install drivers with DDU, and tried with diffrent cards also same problem. my 1 gpu always give me bad hashrate also check afterburner ss. and i also tried diffrent pool. but same problem. even i tried with
GA-970A-DS3P motherboard

and i tried with 5 rx 470 cards also and tried 15.12 drivers too

my config

MB= gigabyte GA-990FXA-UD3 R5
RAM= 8GB
VIRTUAL MEMORY = 16GB
PROCESSOR= AMD FX6300
1200WATT PSU

Try put in your monitor in GPU1 and see what's happens. . . I had the same problem that work't out for me.

i tried it, cards works 15-20 seconds and screen blink and now it showing 0H/S

Did you overclock this card?

no bro im using factory bios and factory clock settings

[1715071386]

1715071386

[1715071386]

1715071386

[1715071386]

1715071386

[1715071386]

1715071386

[1715071386]

1715071386

[Calvinpie]

i am facing this problem

http://i64.tinypic.com/j9pw02.jpg

check out GPU1 H/S

i tried fresh install drivers with DDU, and tried with diffrent cards also same problem. my 1 gpu always give me bad hashrate also check afterburner ss. and i also tried diffrent pool. but same problem. even i tried with
GA-970A-DS3P motherboard

and i tried with 5 rx 470 cards also and tried 15.12 drivers too

my config

MB= gigabyte GA-990FXA-UD3 R5
RAM= 8GB
VIRTUAL MEMORY = 16GB
PROCESSOR= AMD FX6300
1200WATT PSU

Just put screen on card running slow and put it back on preferred card when card is running properly!

i m not understand u bro. pls explain more

This usually happens when pc reboot and miner restarts. I remove HDMI cable from the usual card and insert it into card that's hashing low, hashes will start to climb on card and than I put HDMI back on coolest card. I used to uninstall driver, but that's a waste of time.

[marvykkio]

Optiminer is back and releasing update of his miner for win and nix

Yup, and it's slightly faster Claymore's v8.

There is no Optiminer release yet (0.6.0 is old)
0.7.0 will be released in a few hours

It will be faster than claymore v8?

From v8 probably yes
From v9 I don't know , we will have to see won't we?

I do not think that optiminer can overcome claymore, even v8,
then what really matters more than speed, and pure simplicity, a simple .bat file and go to the launch, though having to install all that crap,
N: B who claims to hold the new version, but it can not distribute it because of the license, please consider putting screanshot here?
let's stop talking shit, right now if it were not for claymore would still try to use those miners crap out there

claymore good for me you are a big developer

[GreenDogh]

i am facing this problem

http://i64.tinypic.com/j9pw02.jpg

check out GPU1 H/S

i tried fresh install drivers with DDU, and tried with diffrent cards also same problem. my 1 gpu always give me bad hashrate also check afterburner ss. and i also tried diffrent pool. but same problem. even i tried with
GA-970A-DS3P motherboard

and i tried with 5 rx 470 cards also and tried 15.12 drivers too

my config

MB= gigabyte GA-990FXA-UD3 R5
RAM= 8GB
VIRTUAL MEMORY = 16GB
PROCESSOR= AMD FX6300
1200WATT PSU

Just put screen on card running slow and put it back on preferred card when card is running properly!

i m not understand u bro. pls explain more

This usually happens when pc reboot and miner restarts. I remove HDMI cable from the usual card and insert it into card that's hashing low, hashes will start to climb on card and than I put HDMI back on coolest card. I used to uninstall driver, but that's a waste of time.

Plug HDMI cable the first GPU in the x16 Pcie slot (if this is the slow hashing card) and the other ones hashing normal speed without cable. This helped me the same problem...

[reflexmk]

i am facing this problem

http://i64.tinypic.com/j9pw02.jpg

check out GPU1 H/S

i tried fresh install drivers with DDU, and tried with diffrent cards also same problem. my 1 gpu always give me bad hashrate also check afterburner ss. and i also tried diffrent pool. but same problem. even i tried with
GA-970A-DS3P motherboard

and i tried with 5 rx 470 cards also and tried 15.12 drivers too

my config

MB= gigabyte GA-990FXA-UD3 R5
RAM= 8GB
VIRTUAL MEMORY = 16GB
PROCESSOR= AMD FX6300
1200WATT PSU

Try put in your monitor in GPU1 and see what's happens. . . I had the same problem that work't out for me.

i tried it, cards works 15-20 seconds and screen blink and now it showing 0H/S

Did you overclock this card?

no bro im using factory bios and factory clock settings

EVERY card on that print screen sure seems overclocked to me, put them all on stock and go from there.

[shadabahmed]

guys problem solved i just change PSU
maybe my PSU have problem.

[shadabahmed]

i am facing this problem

http://i64.tinypic.com/j9pw02.jpg

check out GPU1 H/S

i tried fresh install drivers with DDU, and tried with diffrent cards also same problem. my 1 gpu always give me bad hashrate also check afterburner ss. and i also tried diffrent pool. but same problem. even i tried with
GA-970A-DS3P motherboard

and i tried with 5 rx 470 cards also and tried 15.12 drivers too

my config

MB= gigabyte GA-990FXA-UD3 R5
RAM= 8GB
VIRTUAL MEMORY = 16GB
PROCESSOR= AMD FX6300
1200WATT PSU

maybe 280x have overclocked but RX470 default bro. anyway problem solved by change PSU


Try put in your monitor in GPU1 and see what's happens. . . I had the same problem that work't out for me.

i tried it, cards works 15-20 seconds and screen blink and now it showing 0H/S

Did you overclock this card?

no bro im using factory bios and factory clock settings

EVERY card on that print screen sure seems overclocked to me, put them all on stock and go from there.

bro maybe 280x overclocked but RX470 is default. any way thanks problem solved by changing PSU

[Claymore]

Currently I check different cards, it takes a lot of time, it seems in next version there will be "-a" option to select best algorithm implementation for your cards.
About speed: for example, 4xx cards will get about 15% speedup. 390 cards will get less.

PS. Please don't PM me about getting pre-release version - I don't have any private versions/builds.

[maxmad_x]

Currently I check different cards, it takes a lot of time, it seems in next version there will be "-a" option to select best algorithm implementation for your cards.
About speed: for example, 4xx cards will get about 15% speedup. 390 cards will get less.

PS. Please don't PM me about getting pre-release version - I don't have any private versions/builds.

HIIIII,

ETA on V9?

Thank you

[manotroll]

Currently I check different cards, it takes a lot of time, it seems in next version there will be "-a" option to select best algorithm implementation for your cards.
About speed: for example, 4xx cards will get about 15% speedup. 390 cards will get less.

PS. Please don't PM me about getting pre-release version - I don't have any private versions/builds.

And that there have been rumors of a v9 being used
Is there any update for cpu?

[maxmad_x]

Currently I check different cards, it takes a lot of time, it seems in next version there will be "-a" option to select best algorithm implementation for your cards.
About speed: for example, 4xx cards will get about 15% speedup. 390 cards will get less.

PS. Please don't PM me about getting pre-release version - I don't have any private versions/builds.

And that there have been rumors of a v9 being used
Is there any update for cpu?

someone injected claymore v8 with a trojan and probably was trying to steal information

[elzium]

Currently I check different cards, it takes a lot of time, it seems in next version there will be "-a" option to select best algorithm implementation for your cards.

Just throw in some algos and variables and let miners do finetuning for u. U can always relese updated 9.x to choose things auto.

[manotroll]

Currently I check different cards, it takes a lot of time, it seems in next version there will be "-a" option to select best algorithm implementation for your cards.
About speed: for example, 4xx cards will get about 15% speedup. 390 cards will get less.

PS. Please don't PM me about getting pre-release version - I don't have any private versions/builds.

And that there have been rumors of a v9 being used
Is there any update for cpu?

someone injected claymore v8 with a trojan and probably was trying to steal information

Could not encrypt the file and add an integrity checker in the exe?
The antivirus detects because it runs a hidden mining (devfell)
ethminer-0.9.41-genoil-1.1.9 Not detected

[ghostfaceuk]

Currently I check different cards, it takes a lot of time, it seems in next version there will be "-a" option to select best algorithm implementation for your cards.
About speed: for example, 4xx cards will get about 15% speedup. 390 cards will get less.

PS. Please don't PM me about getting pre-release version - I don't have any private versions/builds.

And that there have been rumors of a v9 being used
Is there any update for cpu?

someone injected claymore v8 with a trojan and probably was trying to steal information

probably included something to open a backdoor port on the computer which would let them in to control the miners (change mining wallet address), possibly take control and lock you out so have to pay a ransom to get control back or both and also to see if there was anything on the hard drive.

[Stealth8368]

Currently I check different cards, it takes a lot of time, it seems in next version there will be "-a" option to select best algorithm implementation for your cards.
About speed: for example, 4xx cards will get about 15% speedup. 390 cards will get less.

PS. Please don't PM me about getting pre-release version - I don't have any private versions/builds.

Well u no we are all waiting and constantly checking in for this update since you told us it would be released in 2 to 3 days, that time frame is now up and would it be to much trouble for you to give us an indication of when u plan to release v9

[Claymore]

Currently I check different cards, it takes a lot of time, it seems in next version there will be "-a" option to select best algorithm implementation for your cards.
About speed: for example, 4xx cards will get about 15% speedup. 390 cards will get less.

PS. Please don't PM me about getting pre-release version - I don't have any private versions/builds.

Well u no we are all waiting and constantly checking in for this update since you told us it would be released in 2 to 3 days, that time frame is now up and would it be to much trouble for you to give us an indication of when u plan to release v9

I never said about 2-3 days timeframe for v9.

[Vasiliy]

Do today ?   

[Golku]

Currently I check different cards, it takes a lot of time, it seems in next version there will be "-a" option to select best algorithm implementation for your cards.
About speed: for example, 4xx cards will get about 15% speedup. 390 cards will get less.

PS. Please don't PM me about getting pre-release version - I don't have any private versions/builds.

Well u no we are all waiting and constantly checking in for this update since you told us it would be released in 2 to 3 days, that time frame is now up and would it be to much trouble for you to give us an indication of when u plan to release v9

I never said about 2-3 days timeframe for v9.

Just take your time. A masterpiece needs time

Btw wouldn't it be great if you can host a AMA?
I think there are more people who wants to know more about you because yeah you helped us much with your mining software

[fr4nkthetank]

Currently I check different cards, it takes a lot of time, it seems in next version there will be "-a" option to select best algorithm implementation for your cards.
About speed: for example, 4xx cards will get about 15% speedup. 390 cards will get less.

PS. Please don't PM me about getting pre-release version - I don't have any private versions/builds.

Well u no we are all waiting and constantly checking in for this update since you told us it would be released in 2 to 3 days, that time frame is now up and would it be to much trouble for you to give us an indication of when u plan to release v9

I never said about 2-3 days timeframe for v9.

lol jesus christ people calm the fuck down, he'll release v9 when he releases v9

[Stealth8368]

Currently I check different cards, it takes a lot of time, it seems in next version there will be "-a" option to select best algorithm implementation for your cards.
About speed: for example, 4xx cards will get about 15% speedup. 390 cards will get less.

PS. Please don't PM me about getting pre-release version - I don't have any private versions/builds.

Well u no we are all waiting and constantly checking in for this update since you told us it would be released in 2 to 3 days, that time frame is now up and would it be to much trouble for you to give us an indication of when u plan to release v9

I never said about 2-3 days timeframe for v9.

what's the problem with giving us some kind of indication when u plan to release? We run your software and u make plenty so some curtesy to the community is all I ask,we are all struggling here with zcash difficulty lately and any help is welcome