Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[AriesIV10]

For some reason my rx 470 rigs are shutting down/restarting with 9.2, it didn't happen with 9.1
I still have to run some tests to see if it's power consumption, but it doesn't happen mining ethereum only, so power draw with this version may be higher than ethereum mining, may be?
I still have to test with a different 470 model, i'm currently mining with nitro+ rx 470 8gb, i have a bunch of gigabyte g1gaming 470 4gb to test to check if there's something related to this.
It's working flawlessly with my r9 390/290 rigs

Too bad i can't overvolt 470's in linux, has anybody found a way/util to work on it? i know it's possible but i haven't found any simple tool to do it.

Best regards!

It was indeed power consumption, stock speeds still had resets/poweroffs, undervolted the cards and everything runs fine now.

I have gone back to 9.1 with all of my RX 470s.  9.2 is too unstable and causes resets.

[MrJaekin]

Anyone else not getting payouts from Dwarfpool?  It's been working great the last 3-4 days, but haven't received anything today at all.  .24 confirmed in my balance.

[ps_jb]

I have tried linux version.
Windows version is 10% better in RX 480's

Windows I get average 253 H/s totaling around 1520 H/s on a x6 rig
Linux I get average 220 H/s totaling around 1320 H/s

Still Claymore's Linux version is faster than Optiminer

Is any effect of -i parameter on RX 480 hash rate?

How many hashes with -i 6 and -i 8?

[shadabahmed]

Anyone else not getting payouts from Dwarfpool?  It's been working great the last 3-4 days, but haven't received anything today at all.  .24 confirmed in my balance.

just got my payment of 0.26

[lpareal]

@claymore

Ty you for your work! Best mining software in cryptoworld!

@all

What drivers are you using for RX Series and Win10?

Time to time one of my card got error in device manager, and miner doesn't recognize it... or i got some other problem, not by drivers?

16.9.x to 16.11.x, other drivers check bios signature, resulting in error 43 in device manager.  Only issue for modded bios though.

Hello xeridea!

I've seen your post here and got a question.

I used to use Claymore app 9.1 with 2 x ASUS STRIX R9 380X 4 GB OC on a Win 7 Enterprise with Crimson 15.12.
Recently I replaced the cards for two Sapphire Nitro+ RX 470 4 GB and installed the Crimson 16.12, but everything failed.

Now, I'm seeing some users telling that can mine using RX 470, but I'm feeling lost about what Crimson version should I use, if I can keep Windows 7 or upgrade to Win 10...

Could you please tell me what would be the best setup for my RX 470 card, what Crimson version and OS?

A big thanks in advance!
Lpareal

[dinc]

I think, that Claymore can stop develop new version of miner. This h|s is ok. Yeap?

[chronek]

I think, that Claymore can stop develop new version of miner. This h|s is ok. Yeap?

If he still getting developer fee then he should still develop more

[xeridea]

@claymore

Ty you for your work! Best mining software in cryptoworld!

@all

What drivers are you using for RX Series and Win10?

Time to time one of my card got error in device manager, and miner doesn't recognize it... or i got some other problem, not by drivers?

16.9.x to 16.11.x, other drivers check bios signature, resulting in error 43 in device manager.  Only issue for modded bios though.

Hello xeridea!

I've seen your post here and got a question.

I used to use Claymore app 9.1 with 2 x ASUS STRIX R9 380X 4 GB OC on a Win 7 Enterprise with Crimson 15.12.
Recently I replaced the cards for two Sapphire Nitro+ RX 470 4 GB and installed the Crimson 16.12, but everything failed.

Now, I'm seeing some users telling that can mine using RX 470, but I'm feeling lost about what Crimson version should I use, if I can keep Windows 7 or upgrade to Win 10...

Could you please tell me what would be the best setup for my RX 470 card, what Crimson version and OS?

A big thanks in advance!
Lpareal

Any driver before the 16.12 should work, unless bios mods, then must be 16.9 - 16.11.  16.12 is reported to be ~5% slower, I haven't used it.

I have various rigs with various 470/480s (mostly sapphire), some win7, some win10, various drivers, most cards have bios mods (only memory strap).  As far as I can tell, OS doesn't matter, just don't use new 16.12 driver.

My Sapphire Nitro+ RX 470 4 GB get ~210-215, stock bios slightly lower.

[ayiphelmy]

i have 3 rigs with rx 480, 390, 390x and 7990 all working fine thc Claymore

[lpedretti]

For some reason my rx 470 rigs are shutting down/restarting with 9.2, it didn't happen with 9.1
I still have to run some tests to see if it's power consumption, but it doesn't happen mining ethereum only, so power draw with this version may be higher than ethereum mining, may be?
I still have to test with a different 470 model, i'm currently mining with nitro+ rx 470 8gb, i have a bunch of gigabyte g1gaming 470 4gb to test to check if there's something related to this.
It's working flawlessly with my r9 390/290 rigs

Too bad i can't overvolt 470's in linux, has anybody found a way/util to work on it? i know it's possible but i haven't found any simple tool to do it.

Best regards!

It was indeed power consumption, stock speeds still had resets/poweroffs, undervolted the cards and everything runs fine now.

I have gone back to 9.1 with all of my RX 470s.  9.2 is too unstable and causes resets.

Are you sure it isn't the power consumption that is overloading the psu's?
After i downvolted the 470's it stopped messing around and seems to be pretty stable now.

Best regards!

[carlo_0000]

there is a bug in 9.2  with -i setting and r9 270
when it s on automatic miner chose i5 for 1st gpu and i4 for the others
when i6 is set we got i6
same for i5
but if i set to i4  it use i6

[tide881155]

v9.2

280x    ~220H/s
390      ~325H/s
290x    ~315H/s
Fury     ~350H/s
480      ~260H/s

stock bios, overclocked, 16.10.3

480 reference overclock?

[scavern]

My speed is terrible on Linux build. Getting about 30 H/s per R9 380 and per R9 280.

[toptek]

sense I'm paying for it when ever i use the miner and i don't turn off the FEE can you add more then basic API access so awesome miners sees more and uses more of this miner ? .

I asked why on awesome miners post and got this

https://bitcointalk.org/index.php?topic=676942.msg17269120#msg17269120


it can be added and stay closed software and i pay for it . so why not ?.  Please no fan boy stuff that explains why not it can be done and I'm sure a lot of us would like more access to that degree .

 


  

[Etolay]

I'm getting a total of 765-770 sols in linux with 2x290s and a RX 470 8gb.

Its only 10 sols less then windows and its 730w on the wall. Do you guys think thats ok or it can be improved?

I had to overclock 290s by 10% though.

[scavern]

I really don't get why I am seeing such bad speeds. I even tried different pools. Optiminer seems to work fine.

[Gambler8899]

Any suggestions how to change 3x reconnect try to 1 (before fail over) and/or from 20secs to less, maybe 5 secs?

And maybe adding new functionality "shares time over" .
If detected more than 200.000 shares submited and block still not found, than change pool?

[tide881155]

RX 480 8G doing 265-270 sol , stock miner settings, 1165 core, 2000 mem
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.

Ubuntu 14.04

nice job Claymore


Greetings

How did u get this hashes on 480???265-270! omg... did u use reference one?

[wll1rah]

Anyone know why R7 370 has 4GB's of ram but reports as 3GB's with this miner was doing this in earlier versions as well?

[toptek]

RX 480 8G doing 265-270 sol , stock miner settings, 1165 core, 2000 mem
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.

Ubuntu 14.04

nice job Claymore


Greetings

How did u get this hashes on 480???265-270! omg... did u use reference one?

me to considering the drivers Claymore says use don't support 480 ? . if he using mixed cards that's got to be hard and take a lot of time to set up right.

I'll stay with windows because end the end they are all about the same . and my RX 480 With 4 gb does 241 Sols with a moded bios using the latest patched drivers form AMD, in fact i run better with the new drivers while others claim they don't. if i add 4 GB, i should do about the same around 270 or 280 Sol under windows with a 480 8gb so with Linux that's no supersize to me.