cvax
Member
Offline
Activity: 84
Merit: 10
|
|
March 09, 2014, 11:49:20 PM |
|
Anybody trying GPUCoin with scrypt:N? I am getting all bad hashes for some reason. Hmm.
cudaminer.exe --algo=scrypt:N -H 2 -i 1 -m 1 -l T10x24 -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3367
Going through fine, at hashfever as well. cudaminer32_2_28.exe --algo=scrypt: 2048 -o stratum+tcp://gpu.hashfever.com:3262 -u user -p pass -d 2 -l T10x24 -H 2 -i 0 -m 1 -s 1 Thanks a lot. scrypt:2048 works. Edit: You guys get about half the hash versus regular scrypt right?
|
BTC: 15HAePieDjYge6LTG2HFRZEJseRYJJqmta | YAC: YMvBp1SpY2sZ8nUZgKFLTEx7neuUZ7APuM 8x 750Ti's, AsRock 970 Extreme 4, Athlon II 170u
|
|
|
|
|
|
|
You can see the statistics of your reports to moderators on the "Report to moderator" pages.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
ltcnim
Legendary
Offline
Activity: 914
Merit: 1001
|
|
March 09, 2014, 11:49:43 PM |
|
i'd love to see a few lines of static text in the cmd (like cgminer for example). So, each card should be listed with temp, last khash, valid/invalid shares etc. is this maybe possible? that way you would have a short overview of your gpu's.
|
|
|
|
DougB62
|
|
March 09, 2014, 11:55:43 PM |
|
Anybody trying GPUCoin with scrypt:N? I am getting all bad hashes for some reason. Hmm.
cudaminer.exe --algo=scrypt:N -H 2 -i 1 -m 1 -l T10x24 -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3367
Going through fine, at hashfever as well. cudaminer32_2_28.exe --algo=scrypt: 2048 -o stratum+tcp://gpu.hashfever.com:3262 -u user -p pass -d 2 -l T10x24 -H 2 -i 0 -m 1 -s 1 Thanks a lot. scrypt:2048 works. Your welcome!
|
|
|
|
bromstar
Member
Offline
Activity: 66
Merit: 10
|
|
March 10, 2014, 12:13:02 AM |
|
Any progress or updates on the riser issue?
my 10 risers have arrived. That's progress I guess. That would be awesome to get the same performance on 1x as on 16x Thanks alot for all the effort you put into this project!
|
|
|
|
guitarplinker
Legendary
Offline
Activity: 1694
Merit: 1024
|
|
March 10, 2014, 12:22:03 AM |
|
Any progress or updates on the riser issue?
my 10 risers have arrived. That's progress I guess. That would be awesome to get the same performance on 1x as on 16x Thanks alot for all the effort you put into this project! This 100x over, you're one of the best developers by far that I've seen in the bitcoin "industry". Thanks again for all your hard work Christian!
|
|
|
|
antonio8
Legendary
Offline
Activity: 1386
Merit: 1000
|
|
March 10, 2014, 12:27:54 AM |
|
Anybody trying GPUCoin with scrypt:N? I am getting all bad hashes for some reason. Hmm.
cudaminer.exe --algo=scrypt:N -H 2 -i 1 -m 1 -l T10x24 -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3367
186 blocks and the countdown begins to the real mining starts. I am getting about 155 kh/s on my 750ti's
|
If you are going to leave your BTC on an exchange please send it to this address instead 1GH3ub3UUHbU5qDJW5u3E9jZ96ZEmzaXtG, I will at least use the money better than someone who steals it from the exchange. Thanks
|
|
|
cvax
Member
Offline
Activity: 84
Merit: 10
|
|
March 10, 2014, 12:32:59 AM |
|
Anybody trying GPUCoin with scrypt:N? I am getting all bad hashes for some reason. Hmm.
cudaminer.exe --algo=scrypt:N -H 2 -i 1 -m 1 -l T10x24 -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3367
186 blocks and the countdown begins to the real mining starts. I am getting about 155 kh/s on my 750ti's What settings are you using? I am now using this and get about 125 kh/s on my 750ti's. cudaminer.exe --algo=scrypt:2048 -H 2 -i 0 -m 1 -l T10x14
|
BTC: 15HAePieDjYge6LTG2HFRZEJseRYJJqmta | YAC: YMvBp1SpY2sZ8nUZgKFLTEx7neuUZ7APuM 8x 750Ti's, AsRock 970 Extreme 4, Athlon II 170u
|
|
|
antonio8
Legendary
Offline
Activity: 1386
Merit: 1000
|
|
March 10, 2014, 12:42:01 AM |
|
Anybody trying GPUCoin with scrypt:N? I am getting all bad hashes for some reason. Hmm.
cudaminer.exe --algo=scrypt:N -H 2 -i 1 -m 1 -l T10x24 -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3367
186 blocks and the countdown begins to the real mining starts. I am getting about 155 kh/s on my 750ti's What settings are you using? I am now using this and get about 125 kh/s on my 750ti's. cudaminer.exe --algo=scrypt:2048 -H 2 -i 0 -m 1 -l T10x14 cudaminer.exe --algo=scrypt:2048 -d 1 -m 1 -l T5x24 -i 0 -H 2 Have the Clock to 1186 (+110) and Memory to 1513 (+325). I have a refrence card and factory OC card, that one I can only go up on core by +10
|
If you are going to leave your BTC on an exchange please send it to this address instead 1GH3ub3UUHbU5qDJW5u3E9jZ96ZEmzaXtG, I will at least use the money better than someone who steals it from the exchange. Thanks
|
|
|
cvax
Member
Offline
Activity: 84
Merit: 10
|
|
March 10, 2014, 12:57:08 AM |
|
Anybody trying GPUCoin with scrypt:N? I am getting all bad hashes for some reason. Hmm.
cudaminer.exe --algo=scrypt:N -H 2 -i 1 -m 1 -l T10x24 -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3367
186 blocks and the countdown begins to the real mining starts. I am getting about 155 kh/s on my 750ti's What settings are you using? I am now using this and get about 125 kh/s on my 750ti's. cudaminer.exe --algo=scrypt:2048 -H 2 -i 0 -m 1 -l T10x14 cudaminer.exe --algo=scrypt:2048 -d 1 -m 1 -l T5x24 -i 0 -H 2 Have the Clock to 1186 (+110) and Memory to 1513 (+325). I have a refrence card and factory OC card, that one I can only go up on core by +10 Thanks. T5x24 helped me get extra 10kh/s.
|
BTC: 15HAePieDjYge6LTG2HFRZEJseRYJJqmta | YAC: YMvBp1SpY2sZ8nUZgKFLTEx7neuUZ7APuM 8x 750Ti's, AsRock 970 Extreme 4, Athlon II 170u
|
|
|
boniggy
|
|
March 10, 2014, 01:09:25 AM |
|
Anybody trying GPUCoin with scrypt:N? I am getting all bad hashes for some reason. Hmm.
cudaminer.exe --algo=scrypt:N -H 2 -i 1 -m 1 -l T10x24 -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3367
186 blocks and the countdown begins to the real mining starts. I am getting about 155 kh/s on my 750ti's What settings are you using? I am now using this and get about 125 kh/s on my 750ti's. cudaminer.exe --algo=scrypt:2048 -H 2 -i 0 -m 1 -l T10x14 cudaminer.exe --algo=scrypt:2048 -d 1 -m 1 -l T5x24 -i 0 -H 2 Have the Clock to 1186 (+110) and Memory to 1513 (+325). I have a refrence card and factory OC card, that one I can only go up on core by +10 Thanks. T5x24 helped me get extra 10kh/s. huh? how are you guys getting 155khs on your 750 TI's? Im getting close to 290khs sometimes over 300khs on my 750's. Im running them stock voltage/speeds and T10x24 setting with -H 1Disregard... i missed where you're talking about Scrypt-n
|
|
|
|
bigjme
|
|
March 10, 2014, 01:11:01 AM |
|
My 780 only gets 296kh/s so I doubt it some how
Never mind, you changed it :-)
|
Owner of: cudamining.co.uk
|
|
|
AliMan
|
|
March 10, 2014, 01:30:46 AM |
|
Thanks!
And you running the latest Nvidia drivers? 334.89? and your memory usage would be helpful...
2317MB memory usage (I know, it's not the max, not sure why) Driver 331.39 appearantly I tried to download those same drivers, but couldn't find them. So I tried the ones that came before it and after it, but was getting the same or worse results. About the memory, think you're getting less? I max at 1100mb. Something is up with either the optimization of the drivers, the OS, or something else, just can't figure it out.
|
|
|
|
CrystalCoin
Member
Offline
Activity: 84
Merit: 10
|
|
March 10, 2014, 02:12:36 AM |
|
My 780 gets 220kh on n-scrypt, any way to boost a bit more out of it? cudaminer.exe --algo=scrypt:2048 -H 1 -C 0 -m 1 -d 0 -i 0 -l T12x24 -o blah blah
|
|
|
|
bigjme
|
|
March 10, 2014, 02:38:09 AM |
|
My 780 gets 220kh on n-scrypt, any way to boost a bit more out of it? cudaminer.exe --algo=scrypt:2048 -H 1 -C 0 -m 1 -d 0 -i 0 -l T12x24 -o blah blah
I'm using The T10x20 I'm passing -H 2 No C, no -m Get close to 300khash/s constant on my 780
|
Owner of: cudamining.co.uk
|
|
|
gazzamc
|
|
March 10, 2014, 02:42:20 AM |
|
Anybody trying GPUCoin with scrypt:N? I am getting all bad hashes for some reason. Hmm.
cudaminer.exe --algo=scrypt:N -H 2 -i 1 -m 1 -l T10x24 -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3367
186 blocks and the countdown begins to the real mining starts. I am getting about 155 kh/s on my 750ti's What settings are you using? I am now using this and get about 125 kh/s on my 750ti's. cudaminer.exe --algo=scrypt:2048 -H 2 -i 0 -m 1 -l T10x14 cudaminer.exe --algo=scrypt:2048 -d 1 -m 1 -l T5x24 -i 0 -H 2 Have the Clock to 1186 (+110) and Memory to 1513 (+325). I have a refrence card and factory OC card, that one I can only go up on core by +10 Thanks. T5x24 helped me get extra 10kh/s. I'm getting about 150kh/s - 160kh/s with Core @ +135 & Mem @ +425 (+450 on the second card).. plus chrome opened with a gif playing.. (yields more when i don't connect remotely/no monitor)..
|
|
|
|
CrystalCoin
Member
Offline
Activity: 84
Merit: 10
|
|
March 10, 2014, 02:56:31 AM |
|
My 780 gets 220kh on n-scrypt, any way to boost a bit more out of it? cudaminer.exe --algo=scrypt:2048 -H 1 -C 0 -m 1 -d 0 -i 0 -l T12x24 -o blah blah
I'm using The T10x20 I'm passing -H 2 No C, no -m Get close to 300khash/s constant on my 780 cudaminer.exe --algo=scrypt:2048 -H 2 -d 0 -i 0 -l T10x20 got me only like 109.
|
|
|
|
cvax
Member
Offline
Activity: 84
Merit: 10
|
|
March 10, 2014, 03:34:44 AM |
|
Damn. My cudaminers keep blowing up on T5x24 on my 750tis. They can mine scrypt at T5x24 endlessly, but not this GPUCoin.
|
BTC: 15HAePieDjYge6LTG2HFRZEJseRYJJqmta | YAC: YMvBp1SpY2sZ8nUZgKFLTEx7neuUZ7APuM 8x 750Ti's, AsRock 970 Extreme 4, Athlon II 170u
|
|
|
AliMan
|
|
March 10, 2014, 04:23:49 AM |
|
My 780 gets 220kh on n-scrypt, any way to boost a bit more out of it? cudaminer.exe --algo=scrypt:2048 -H 1 -C 0 -m 1 -d 0 -i 0 -l T12x24 -o blah blah
I'm using The T10x20 I'm passing -H 2 No C, no -m Get close to 300khash/s constant on my 780 cudaminer.exe --algo=scrypt:2048 -H 2 -d 0 -i 0 -l T10x20 got me only like 109. The best I could do was: cudaminer.exe --algo=scrypt:2048 -H 2 -d 0 -C 2 -i 0 -m 0 -l T64x2 If you do -H 1, you could get 5-10kh/s more. It helped 3/5 of my 780's.
|
|
|
|
tachyon_john
Newbie
Offline
Activity: 28
Merit: 0
|
|
March 10, 2014, 04:31:44 AM |
|
i'd love to see a few lines of static text in the cmd (like cgminer for example). So, each card should be listed with temp, last khash, valid/invalid shares etc. is this maybe possible? that way you would have a short overview of your gpu's.
I'm not familiar with cgminer's output, but I gave Christian the beginnings of a patch to enable cudaminer to print GPU temps, fan speed, and power consumption data as reported by the NVIDIA drivers. Not all GPUs are capable of reporting all of those measurements, but all recent GPUs will report temperature and fan speed. Here's an example log from my patched version of cudaminer. I'm sure that it can be improved a lot beyond the code I sent Christian, but this is at least a starting point: [2014-03-09 23:07:24] Stratum detected new block [2014-03-09 23:07:24] GPU #0: Tesla K20c, 537.70 khash/s [2014-03-09 23:07:24] Temp: 68C Fan speed: 68% Power: 186W [2014-03-09 23:07:24] GPU #2: GeForce GTX 680, 321.40 khash/s [2014-03-09 23:07:24] Temp: 88C Fan speed: 72% Power: N/A [2014-03-09 23:07:24] GPU #1: GeForce GTX 750 Ti, 266.37 khash/s [2014-03-09 23:07:24] Temp: 66C Fan speed: 53% Power: N/A [2014-03-09 23:07:24] GPU #3: Tesla K20c, 541.51 khash/s [2014-03-09 23:07:24] Temp: 72C Fan speed: 78% Power: 188W [2014-03-09 23:07:42] DEBUG: hash <= target Hash: 0000006504c7edb989ead541e02089f081a84d44157c58ae617f37e79503987f Target: 0000007fff800000000000000000000000000000000000000000000000000000 [2014-03-09 23:07:42] GPU #1: GeForce GTX 750 Ti, 266.31 khash/s [2014-03-09 23:07:42] Temp: 66C Fan speed: 54% Power: N/A [2014-03-09 23:07:42] accepted: 17/17 (100.00%), 1667 khash/s (yay!!!)
|
|
|
|
gazzamc
|
|
March 10, 2014, 04:37:59 AM |
|
i'd love to see a few lines of static text in the cmd (like cgminer for example). So, each card should be listed with temp, last khash, valid/invalid shares etc. is this maybe possible? that way you would have a short overview of your gpu's.
I'm not familiar with cgminer's output, but I gave Christian the beginnings of a patch to enable cudaminer to print GPU temps, fan speed, and power consumption data as reported by the NVIDIA drivers. Not all GPUs are capable of reporting all of those measurements, but all recent GPUs will report temperature and fan speed. Here's an example log from my patched version of cudaminer. I'm sure that it can be improved a lot beyond the code I sent Christian, but this is at least a starting point: [2014-03-09 23:07:24] Stratum detected new block [2014-03-09 23:07:24] GPU #0: Tesla K20c, 537.70 khash/s [2014-03-09 23:07:24] Temp: 68C Fan speed: 68% Power: 186W [2014-03-09 23:07:24] GPU #2: GeForce GTX 680, 321.40 khash/s [2014-03-09 23:07:24] Temp: 88C Fan speed: 72% Power: N/A [2014-03-09 23:07:24] GPU #1: GeForce GTX 750 Ti, 266.37 khash/s [2014-03-09 23:07:24] Temp: 66C Fan speed: 53% Power: N/A [2014-03-09 23:07:24] GPU #3: Tesla K20c, 541.51 khash/s [2014-03-09 23:07:24] Temp: 72C Fan speed: 78% Power: 188W [2014-03-09 23:07:42] DEBUG: hash <= target Hash: 0000006504c7edb989ead541e02089f081a84d44157c58ae617f37e79503987f Target: 0000007fff800000000000000000000000000000000000000000000000000000 [2014-03-09 23:07:42] GPU #1: GeForce GTX 750 Ti, 266.31 khash/s [2014-03-09 23:07:42] Temp: 66C Fan speed: 54% Power: N/A [2014-03-09 23:07:42] accepted: 17/17 (100.00%), 1667 khash/s (yay!!!) That would be awesome.. I love that about cgminer.. A runtime would be nice also and even the Pools URL (as it gets hard to keep track with multiple instances running) at the top..
|
|
|
|
|