D37945
Newbie
Offline
Activity: 47
Merit: 0
|
|
December 11, 2017, 07:22:10 AM |
|
Please help a crypto chick out!
Does Gateless Gate Sharp run neoscrypt mining?
Tried running a neoscrypt .bat file on the original Gateless Gate but I keep getting this error-
GPU0: Idle more than 2 minutes, declaring SICK! GPU still showing activity suggesting a hard hang. Will not attempt to auto-restart it.
Maybe this error wont show up on Gateless Gate Sharp...
Read the post just above yours, you'll get your answer, or the first post of this thread.... I know Gateless Gate Sharp doesn't support neoscrypt yet. I was hoping someone famliar with the original could help me with my error code.
|
|
|
|
MBVL
Newbie
Offline
Activity: 43
Merit: 0
|
|
December 11, 2017, 08:25:56 AM |
|
I tried to mine ETN using RX580 in Gateless gate sharp.. Why it show actual hashrate only around 300 H/s while in approximate hashrate it can reach 800.. Is there any item I should modify to get the max hashrate?
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
December 11, 2017, 08:57:57 AM |
|
Please help a crypto chick out!
Does Gateless Gate Sharp run neoscrypt mining?
Tried running a neoscrypt .bat file on the original Gateless Gate but I keep getting this error-
GPU0: Idle more than 2 minutes, declaring SICK! GPU still showing activity suggesting a hard hang. Will not attempt to auto-restart it.
Maybe this error wont show up on Gateless Gate Sharp...
Read the post just above yours, you'll get your answer, or the first post of this thread.... I know Gateless Gate Sharp doesn't support neoscrypt yet. I was hoping someone famliar with the original could help me with my error code. Use ccminer klaust for neoscrypt if you use nvidia for amd dunno
|
|
|
|
UnclWish
|
|
December 11, 2017, 11:20:59 AM |
|
I tried to mine ETN using RX580 in Gateless gate sharp.. Why it show actual hashrate only around 300 H/s while in approximate hashrate it can reach 800.. Is there any item I should modify to get the max hashrate?
What do you mean "actual hashrate"? I use GGS for cryptonight on ETN. Speed of cryptonight in miner same as allways. RX 580 800+ h/s. Maybe you mean hashrate showed on the pool where you mine? In this case you must know that pools shows hashrate calculated from accepted recieved shares and difficulty on wich they was finded. If your pool shows recieved hashrate less then in miner it's a pool problem, not miner. Check pool diffeculty, maybe it too high for your rig. Try to use another port number from your pool with less difficulty. Pool can stale your shares. Try another pool. And onother one thing - for compare actual speed from pool you must take it for long period of time. F.e. 12 hours or 24.
|
|
|
|
SirOverdose
Newbie
Offline
Activity: 13
Merit: 0
|
|
December 11, 2017, 12:08:36 PM |
|
I have the same error i hope someone will tell me whats wrong. How many GPU's do you have in your system btw?
|
|
|
|
MistGold
|
|
December 11, 2017, 01:17:41 PM |
|
And I think it's time to add neoscrypt. Please, add it.
zawawa already has neoscrypt build O_o You are talking about the original Gateless Gate. I don't provide support for that anymore. He is talking about the new Gateless Gate Sharp. Soo you said somewhere 900kh/s neoscrypt for rx570 can u provide config?
|
|
|
|
nin3tin
|
|
December 11, 2017, 04:49:26 PM |
|
How to fix this I have the same error i hope someone will tell me whats wrong. How many GPU's do you have in your system btw? i have 9 GPU's , using windows 10 1 R9 Fury 1 Rx 470 1 RX570 4 RX580 1 Nvidia 1060 1 Nvidia 1070
|
|
|
|
faanigee
Member
Offline
Activity: 95
Merit: 10
|
|
December 11, 2017, 06:01:54 PM |
|
How to fix this I have the same error i hope someone will tell me whats wrong. How many GPU's do you have in your system btw? i have 9 GPU's , using windows 10 1 R9 Fury 1 Rx 470 1 RX570 4 RX580 1 Nvidia 1060 1 Nvidia 1070 Its support only 8 gpu devices that the reason you got that error...!!!
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
December 12, 2017, 02:33:36 AM |
|
Just finished looking at your ethash_pascal kernel. It looks like you partition the work so 1 of the 4 SIMD units in each CU is used for Pascal, and the other 3 is used for Ethereum. Is that correct? I think you should be able to saturate the L2 interface with just 2 of the 4 SIMD units per CU, which would give you double the performance for Pascal.
I did try 2 SIMD units per CU for Ethash before, but the hashrate was significantly lower. Tha dual mining kernel is essentially a hybrid of ethash-new.cl and pascal.cl from the original Gateless Gate, so you can experiment with ethash-new.cl with different local work sizes.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
SirOverdose
Newbie
Offline
Activity: 13
Merit: 0
|
|
December 12, 2017, 05:41:49 AM |
|
I really hope there will be support for more than 8 GPU's in windows and also neoscrypt algo, there was nothing that could do better than Gateless Gate on AMD.
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
December 12, 2017, 04:20:11 PM |
|
Gateless Gate Sharp 1.1.4 alpha https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.1.4-alpha* Improved DEVFEE handling. * Added support for zpool. * Bug fix for 8+ GPU's. * Various bug fixes and improvements. I am still out of country but managed to upload a new version. I hope this version works well... I will add NeoScrypt support next.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
UnclWish
|
|
December 12, 2017, 04:41:55 PM |
|
Thanks, zawawa! Now we'll test it... Waiting for NeoScrypt.
|
|
|
|
SirOverdose
Newbie
Offline
Activity: 13
Merit: 0
|
|
December 12, 2017, 05:24:33 PM |
|
Great job, love the interface, but I can only see 8 of 11 GPU's
|
|
|
|
UnclWish
|
|
December 12, 2017, 06:15:05 PM |
|
What about cryptonight-lite? GGS dosn't support it?
|
|
|
|
MistGold
|
|
December 12, 2017, 07:29:38 PM |
|
So zawawa can u atlast answer me why wont you post this cfg? :p
|
|
|
|
nerdralph
|
|
December 12, 2017, 07:43:49 PM |
|
Just finished looking at your ethash_pascal kernel. It looks like you partition the work so 1 of the 4 SIMD units in each CU is used for Pascal, and the other 3 is used for Ethereum. Is that correct? I think you should be able to saturate the L2 interface with just 2 of the 4 SIMD units per CU, which would give you double the performance for Pascal.
I did try 2 SIMD units per CU for Ethash before, but the hashrate was significantly lower. Tha dual mining kernel is essentially a hybrid of ethash-new.cl and pascal.cl from the original Gateless Gate, so you can experiment with ethash-new.cl with different local work sizes. If it's a lot slower with 2, my first guess would be the keccak hash is slowing it down. It probably won't be easy to improve without going to pure asm...
|
|
|
|
twofreckles
|
|
December 12, 2017, 10:50:38 PM |
|
What is speed you guys achieve with RX 470/570 4GB (whatever memory you got) mining cryptonight? And is it stable?
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
December 12, 2017, 10:55:12 PM |
|
So zawawa can u atlast answer me why wont you post this cfg? :p
I decided a while ago not to provide support for the original Gateless Gate. I am just too busy and I do not have time for that, unfortunately.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
UnclWish
|
|
December 13, 2017, 05:48:20 PM |
|
zawawa, with adding neoscrypt please take a look on cryptonight-lite. Maybe it didn't need much time to add them...
|
|
|
|
sir_blacks
Jr. Member
Offline
Activity: 119
Merit: 3
|
|
December 13, 2017, 06:14:52 PM |
|
zawawa, with adding neoscrypt please take a look on cryptonight-lite. Maybe it didn't need much time to add them...
i will say it will be great to see add equihash + neoscrypt & lyra2rev2 in future thx
|
|
|
|
|