Bitcoin Forum
November 13, 2024, 07:47:22 AM *
News: Check out the artwork 1Dq created to commemorate this forum's 15th anniversary
 
   Home   Help Search Login Register More  
Poll
Question: Do you want to see improvements in Ethash dual-mining with GGS?
I desperately need it. - 8 (15.1%)
It would be nice. - 12 (22.6%)
It's not worth it anymore. - 33 (62.3%)
Total Voters: 53

Pages: « 1 ... 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 [139] 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 ... 197 »
  Print  
Author Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480!  (Read 214418 times)
treanski
Full Member
***
Offline Offline

Activity: 364
Merit: 106


ONe Social Network.


View Profile
February 06, 2018, 05:09:23 PM
 #2761

Your videocard is not supported. It's too weak to mine.
Can't I mine with CPU with this software?

no

skablast
Member
**
Offline Offline

Activity: 476
Merit: 19


View Profile
February 06, 2018, 05:21:40 PM
 #2762

https://imgur.com/a/sUA5I

If  you changed the timing strips / memory overclock/gpu undervolt for Etash ethereum, they do have problem with Neoscrypt and lower speed with  cryptonight..
I put some of the original strips back, few tweaks on UV and OC  and for now, cryptonight is working... the way that I like with less than 70w/card Speed 900, low temperature



treanski
Full Member
***
Offline Offline

Activity: 364
Merit: 106


ONe Social Network.


View Profile
February 06, 2018, 10:16:51 PM
 #2763

@zazawa

i would like to request another feature. would it be much work to make it possible to mine same algo on 2 different pools and set how many hashpower send to each pool? would make things easier to mine different coins.
like with sgminer and "quota" command

example sgminer config 2 pools 50%/50% hashpower

Quote
{
  "pools": [
    {
      "name": "coin1",
      "quota": "50;pool1 url",
      "user": "Ks5mEA8C75yPVgZ7di2SZT7tpjZM3vewUbJEgvWGTxVWZAuCUeKvHbQEYcLirvLxZ4gAxfZSvE6SSAK tRaR7cNTWAReWiJo.45000",
      "pass": "x",
      "no-extranonce": true,
      "profile": "xmr"
    },
{
      "name": "coin2",
      "quota": "50;pool2 url",
      "user": "i",
      "pass": "x",
      "no-extranonce": true,
      "profile": "xmr"
    }

UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
February 07, 2018, 01:08:10 AM
Last edit: February 07, 2018, 06:45:43 AM by UnclWish
 #2764

I don't understand why GGS every start mining saves settings. It's no changes in them...
And it's still exists bug with reconnect when custom pool server didn't connected from 1st time. Recoonection didn't work:

2018-02-07 03:54:41.3293 [4] Exception in Stratum.StreamReaderThread(): System.Net.Sockets.SocketException (0x80004005): Пoпыткa ycтaнoвить coeдинeниe былa бeзycпeшнoй, т.к. oт дpyгoгo кoмпьютepa зa тpeбyeмoe вpeмя нe пoлyчeн нyжный oтклик, или былo paзopвaнo yжe ycтaнoвлeннoe coeдинeниe из-зa нeвepнoгo oткликa yжe пoдключeннoгo кoмпьютepa 45.77.53.149:5555
   в System.Net.Sockets.TcpClient..ctor(String hostname, Int32 port)
   в GatelessGateSharp.Stratum.StreamReaderThread()
2018-02-07 03:54:41.3293 [4] Reconnecting to the server...
2018-02-07 03:55:07.3391 [4] Exception in Stratum.StreamReaderThread(): System.Net.Sockets.SocketException (0x80004005): Пoпыткa ycтaнoвить coeдинeниe былa бeзycпeшнoй, т.к. oт дpyгoгo кoмпьютepa зa тpeбyeмoe вpeмя нe пoлyчeн нyжный oтклик, или былo paзopвaнo yжe ycтaнoвлeннoe coeдинeниe из-зa нeвepнoгo oткликa yжe пoдключeннoгo кoмпьютepa 45.77.53.149:5555
   в System.Net.Sockets.TcpClient..ctor(String hostname, Int32 port)
   в GatelessGateSharp.Stratum.StreamReaderThread()
2018-02-07 03:55:07.3391 [4] Reconnecting to the server...
2018-02-07 03:55:20.9139 [20] Exception in miner thread: Stratum server failed to send a new job.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9139 [20] Restarting miner thread...
2018-02-07 03:55:20.9139 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9139 [20] Restarting miner thread...
2018-02-07 03:55:20.9149 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9149 [20] Restarting miner thread...
2018-02-07 03:55:20.9149 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9149 [20] Restarting miner thread...
2018-02-07 03:55:20.9159 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9159 [20] Restarting miner thread...
2018-02-07 03:55:20.9159 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9159 [20] Restarting miner thread...


Last strings repeats forever.
If press Stop/resume connection establishes.
zawawa (OP)
Sr. Member
****
Offline Offline

Activity: 728
Merit: 304


Miner Developer


View Profile
February 07, 2018, 06:47:13 AM
 #2765

I don't understand why GGS every start mining saves settings. It's no changes in them...
And it's still exists bug with reconnect when custom pool server didn't connected from 1st time. Recoonection didn't work:

2018-02-07 03:54:41.3293 [4] Exception in Stratum.StreamReaderThread(): System.Net.Sockets.SocketException (0x80004005): Пoпыткa ycтaнoвить coeдинeниe былa бeзycпeшнoй, т.к. oт дpyгoгo кoмпьютepa зa тpeбyeмoe вpeмя нe пoлyчeн нyжный oтклик, или былo paзopвaнo yжe ycтaнoвлeннoe coeдинeниe из-зa нeвepнoгo oткликa yжe пoдключeннoгo кoмпьютepa 45.77.53.149:5555
   в System.Net.Sockets.TcpClient..ctor(String hostname, Int32 port)
   в GatelessGateSharp.Stratum.StreamReaderThread()
2018-02-07 03:54:41.3293 [4] Reconnecting to the server...
2018-02-07 03:55:07.3391 [4] Exception in Stratum.StreamReaderThread(): System.Net.Sockets.SocketException (0x80004005): Пoпыткa ycтaнoвить coeдинeниe былa бeзycпeшнoй, т.к. oт дpyгoгo кoмпьютepa зa тpeбyeмoe вpeмя нe пoлyчeн нyжный oтклик, или былo paзopвaнo yжe ycтaнoвлeннoe coeдинeниe из-зa нeвepнoгo oткликa yжe пoдключeннoгo кoмпьютepa 45.77.53.149:5555
   в System.Net.Sockets.TcpClient..ctor(String hostname, Int32 port)
   в GatelessGateSharp.Stratum.StreamReaderThread()
2018-02-07 03:55:07.3391 [4] Reconnecting to the server...
2018-02-07 03:55:20.9139 [20] Exception in miner thread: Stratum server failed to send a new job.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9139 [20] Restarting miner thread...
2018-02-07 03:55:20.9139 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9139 [20] Restarting miner thread...
2018-02-07 03:55:20.9149 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9149 [20] Restarting miner thread...
2018-02-07 03:55:20.9149 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9149 [20] Restarting miner thread...
2018-02-07 03:55:20.9159 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9159 [20] Restarting miner thread...
2018-02-07 03:55:20.9159 [20] Exception in miner thread: Ccылкa нa oбъeкт нe yкaзывaeт нa экзeмпляp oбъeктa.   в GatelessGateSharp.OpenCLCryptoNightMiner.MinerThread()
2018-02-07 03:55:20.9159 [20] Restarting miner thread...


Last strings repeats forever.
If press Stop/resume connections establishes.

Ah, that’s because the messages of exceptions on your system is not in English.
I will fix it soon.

Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4V
BTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
zawawa (OP)
Sr. Member
****
Offline Offline

Activity: 728
Merit: 304


Miner Developer


View Profile
February 07, 2018, 07:03:01 AM
 #2766

I spent the whole day experimenting with memory timing mods for Ethash and now I’m getting closer to 28 Mh/s with a stock RX 480. Not so bad, methinks.

Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4V
BTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
February 07, 2018, 07:12:48 AM
 #2767

I spent the whole day experimenting with memory timing mods for Ethash and now I’m getting closer to 28 Mh/s with a stock RX 480. Not so bad, methinks.
What about stock RX 580? And with what size and memory type 480 you tried?

And settings start to save after any changings in GGS even if that settings returns back. F.e. after starting GGS I change 2nd chart from Shares to Speed and back to enable coloring of GPUs. And now GGS wants to save config, but settings are not changed at all.
It's need to add check to compare config before saving to minimize disk writing.
zawawa (OP)
Sr. Member
****
Offline Offline

Activity: 728
Merit: 304


Miner Developer


View Profile
February 07, 2018, 07:25:10 AM
 #2768

I spent the whole day experimenting with memory timing mods for Ethash and now I’m getting closer to 28 Mh/s with a stock RX 480. Not so bad, methinks.
What about stock RX 580? And with what size and memory type 480 you tried?

And settings start to save after any changings in GGS even if that settings returns back. F.e. after starting GGS I change 2nd chart from Shares to Speed and back to enable coloring of GPUs. And now GGS wants to save config, but settings are not changed at all.
It's need to add check to compare config before saving to minimize disk writing.

Most of my 480’s have 8GB ram by Samsung. After I’m done with it, I will work on Elpida.

Honestly, checking values is just too much trouble. I will do something else to reduce disk access.

Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4V
BTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
February 07, 2018, 07:27:33 AM
 #2769

I spent the whole day experimenting with memory timing mods for Ethash and now I’m getting closer to 28 Mh/s with a stock RX 480. Not so bad, methinks.
What about stock RX 580? And with what size and memory type 480 you tried?

And settings start to save after any changings in GGS even if that settings returns back. F.e. after starting GGS I change 2nd chart from Shares to Speed and back to enable coloring of GPUs. And now GGS wants to save config, but settings are not changed at all.
It's need to add check to compare config before saving to minimize disk writing.

Most of my 480’s have 8GB ram by Samsung. After I’m done with it, I will work on Elpida.

Honestly, checking values is just too much trouble. I will do something else to reduce disk access.
Thanks about disk access. For SSD it important.

Samsung and Elpida is good. But what about Hynix MJR memory?
zawawa (OP)
Sr. Member
****
Offline Offline

Activity: 728
Merit: 304


Miner Developer


View Profile
February 07, 2018, 07:29:12 AM
 #2770

I spent the whole day experimenting with memory timing mods for Ethash and now I’m getting closer to 28 Mh/s with a stock RX 480. Not so bad, methinks.
What about stock RX 580? And with what size and memory type 480 you tried?

And settings start to save after any changings in GGS even if that settings returns back. F.e. after starting GGS I change 2nd chart from Shares to Speed and back to enable coloring of GPUs. And now GGS wants to save config, but settings are not changed at all.
It's need to add check to compare config before saving to minimize disk writing.

Most of my 480’s have 8GB ram by Samsung. After I’m done with it, I will work on Elpida.

Honestly, checking values is just too much trouble. I will do something else to reduce disk access.
Thanks about disk access. For SSD it important.

Samsung and Elpida is good. But what about Hynix MJR memory?

Well, for that, somebody has to donate a card or two to me...

Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4V
BTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
zawawa (OP)
Sr. Member
****
Offline Offline

Activity: 728
Merit: 304


Miner Developer


View Profile
February 07, 2018, 07:41:51 AM
 #2771

@zazawa

i would like to request another feature. would it be much work to make it possible to mine same algo on 2 different pools and set how many hashpower send to each pool? would make things easier to mine different coins.
like with sgminer and "quota" command

example sgminer config 2 pools 50%/50% hashpower

Quote
{
  "pools": [
    {
      "name": "coin1",
      "quota": "50;pool1 url",
      "user": "Ks5mEA8C75yPVgZ7di2SZT7tpjZM3vewUbJEgvWGTxVWZAuCUeKvHbQEYcLirvLxZ4gAxfZSvE6SSAK tRaR7cNTWAReWiJo.45000",
      "pass": "x",
      "no-extranonce": true,
      "profile": "xmr"
    },
{
      "name": "coin2",
      "quota": "50;pool2 url",
      "user": "i",
      "pass": "x",
      "no-extranonce": true,
      "profile": "xmr"
    }

Technically, this is pretty straight forward, but I need to figure out a good way to implement this feature without making the user interface more confusing for the nontechnical users. We will see...

Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4V
BTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
February 07, 2018, 07:53:04 AM
 #2772

I spent the whole day experimenting with memory timing mods for Ethash and now I’m getting closer to 28 Mh/s with a stock RX 480. Not so bad, methinks.
What about stock RX 580? And with what size and memory type 480 you tried?

And settings start to save after any changings in GGS even if that settings returns back. F.e. after starting GGS I change 2nd chart from Shares to Speed and back to enable coloring of GPUs. And now GGS wants to save config, but settings are not changed at all.
It's need to add check to compare config before saving to minimize disk writing.

Most of my 480’s have 8GB ram by Samsung. After I’m done with it, I will work on Elpida.

Honestly, checking values is just too much trouble. I will do something else to reduce disk access.
Thanks about disk access. For SSD it important.

Samsung and Elpida is good. But what about Hynix MJR memory?

Well, for that, somebody has to donate a card or two to me...
Unfortunately, I'm not so rich... But I know that Hynix MJR memory works similiar to Micron memory... Timings from Micron memory works good  and better for Hynix MJR without editing.
skablast
Member
**
Offline Offline

Activity: 476
Merit: 19


View Profile
February 07, 2018, 11:14:16 AM
 #2773

Zawawa:

when you said:

Ah, that’s because the messages of exceptions on your system is not in English.
I will fix it soon.


its probably the same things that happen with my Italian windows and  the fact that you sw keep askying at the start for a 24 GB virtual page minimum even if I have a 60 gb virtual page! And that the sw is unable to modify it when I let it run...
z97rx470
Newbie
*
Offline Offline

Activity: 36
Merit: 0


View Profile
February 07, 2018, 12:23:17 PM
 #2774

Why this keep freezing my rig after like 30 minutes it doesn't even restart I have to manually reset the power supply to get it going again
UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
February 07, 2018, 01:18:17 PM
 #2775

Why this keep freezing my rig after like 30 minutes it doesn't even restart I have to manually reset the power supply to get it going again
Try to lower overclock or rise voltage if you make undervoltage. Also try to lower intensity. Wich algo you mine?
QuirkSilver
Member
**
Offline Offline

Activity: 80
Merit: 13


View Profile
February 07, 2018, 06:12:07 PM
 #2776

Zawawa, why don't you include default PBE timings 1.6.7 one..
Hynix MJR though is garbage, i hash monero on 4gb way faster than on 8gb rx 580 (well, same thing with memory controllers as i expected, funnily, RX 560 2gb elpida, mines at 540 H/s 1200/2050 undervolted (didn't try going more!) even the non 6 pin version! it doesnt even throttle! meaning less than 45 watts or even less of energy, meanwhile, the 4GB variants does mid 400s!)
FFI2013
Hero Member
*****
Offline Offline

Activity: 906
Merit: 507


View Profile
February 07, 2018, 08:17:02 PM
 #2777

Figure I'd let you know that I'm getting 815h on my r9 390 and the pool is reporting about the same but at the bottom it says 404h and one more thing does the overclocking work now I had a old release before and just install the latest and didn't want to uninstall afterburner if I still needed but would much rather run my clocks through the miner
FFI2013
Hero Member
*****
Offline Offline

Activity: 906
Merit: 507


View Profile
February 07, 2018, 09:39:03 PM
 #2778

Zawawa, why don't you include default PBE timings 1.6.7 one..
Hynix MJR though is garbage, i hash monero on 4gb way faster than on 8gb rx 580 (well, same thing with memory controllers as i expected, funnily, RX 560 2gb elpida, mines at 540 H/s 1200/2050 undervolted (didn't try going more!) even the non 6 pin version! it doesnt even throttle! meaning less than 45 watts or even less of energy, meanwhile, the 4GB variants does mid 400s!)
What brand rx 560 are you using I'm trying to find some more decent cards you don't need a loan for and 540h at 45w is good plus I like the cryptonight algo
bob256k
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
February 07, 2018, 10:27:08 PM
 #2779

How do you delete the settings Gateless gate applies during startup? I have autostart/automine setup, and I undervolted 2 cards too low, which means after 5 minutes two cards crash and then the other cards crash the program after 20 minutes. I have tried uninstalling Gateless gate but the settings are stored on my win 10 computer somewhere else, probably the registry. How do i delete the settings for overclock, undervoltage, intensity and such for the GGS  so i can start from fresh?
UnclWish
Sr. Member
****
Offline Offline

Activity: 1484
Merit: 253


View Profile
February 07, 2018, 10:38:54 PM
 #2780

How do you delete the settings Gateless gate applies during startup? I have autostart/automine setup, and I undervolted 2 cards too low, which means after 5 minutes two cards crash and then the other cards crash the program after 20 minutes. I have tried uninstalling Gateless gate but the settings are stored on my win 10 computer somewhere else, probably the registry. How do i delete the settings for overclock, undervoltage, intensity and such for the GGS  so i can start from fresh?
Just hold the "SHIFT" key during startup of GGS.
Pages: « 1 ... 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 [139] 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 ... 197 »
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!