CryptoWaffle
Jr. Member
Offline
Activity: 187
Merit: 2
|
|
January 30, 2018, 03:07:34 AM |
|
What are you mining rigth now?
coins and tokens, you ?
|
|
|
|
Moondoggie
|
|
January 30, 2018, 04:08:11 AM |
|
What are you mining rigth now?
Was mining Garlic coin Seems good if you have a nice CPU.
|
|
|
|
ivakar
|
|
January 30, 2018, 04:51:04 AM |
|
What are you mining rigth now?
This is very sensitive information) Not everyone will be sharing this, so this kinda personal)) but for me it's important to mine with low diff now, in order to sell with high profit later..
|
|
|
|
betiteh0777
Newbie
Offline
Activity: 133
Merit: 0
|
|
January 30, 2018, 05:27:40 AM |
|
What are you mining rigth now?
will give you few tips: BZL Coin (BZL) Cerberus (CBS) Tune Coin (TUN) MUN COIN (MUN) Crowd Coin (CRC) Goa Coin (GOA) also you can try Solaris (XLR) after all mess with wallets and forks lot of people quit mining it so low diff now for you HAPPY MINING
|
|
|
|
HodlerBaggins
Newbie
Offline
Activity: 42
Merit: 0
|
|
January 30, 2018, 05:59:52 AM Last edit: January 30, 2018, 06:13:31 AM by HodlerBaggins |
|
What are you mining rigth now?
will give you few tips: BZL Coin (BZL) Cerberus (CBS) Tune Coin (TUN) MUN COIN (MUN) Crowd Coin (CRC) Goa Coin (GOA) also you can try Solaris (XLR) after all mess with wallets and forks lot of people quit mining it so low diff now for you HAPPY MINING Yes, you can sell straight up turds for a profit in this market Just make sure you are dumping before the premine dumps on most of those.
|
|
|
|
sky999
|
|
January 30, 2018, 07:54:35 AM |
|
will give you few tips: BZL Coin (BZL) Cerberus (CBS) Tune Coin (TUN) MUN COIN (MUN) Crowd Coin (CRC) Goa Coin (GOA) also you can try Solaris (XLR) after all mess with wallets and forks lot of people quit mining it so low diff now for you HAPPY MINING What about skein coins?
|
|
|
|
Uchiiha-madara
Newbie
Offline
Activity: 32
Merit: 0
|
|
January 30, 2018, 08:19:39 AM |
|
I have a mining rig with 6x 1080ti cards and it is working fine and stable for 2 months now I have read that the new NVidia drivers improve the cards hashrates so guys is it worth it to update the drivers for my rig or should I stick to my stable working drivers any suggestions and opinions are welcomed
|
|
|
|
abudfv2008
|
|
January 30, 2018, 09:50:26 AM |
|
What are you mining rigth now?
will give you few tips: BZL Coin (BZL) Cerberus (CBS) Tune Coin (TUN) MUN COIN (MUN) Crowd Coin (CRC) Goa Coin (GOA) also you can try Solaris (XLR) after all mess with wallets and forks lot of people quit mining it so low diff now for you HAPPY MINING All of them (except Solaris) are Vivoshitclones created with only one goal - to dump premine into fools hands. If you mine for food selling coins immediately - then it's ok - you can earn couple $ while it is not too late.
|
|
|
|
car1999
|
|
January 30, 2018, 10:11:54 AM |
|
I have a mining rig with 6x 1080ti cards and it is working fine and stable for 2 months now I have read that the new NVidia drivers improve the cards hashrates so guys is it worth it to update the drivers for my rig or should I stick to my stable working drivers any suggestions and opinions are welcomed
try it.
|
|
|
|
crypto4pizza
Newbie
Offline
Activity: 102
Merit: 0
|
|
January 30, 2018, 11:56:48 AM |
|
Hello everyone, What is a good intensity for a couple of 1080ti's -- is it 26, or maybe something like 22? I wouldn't want to burn down my cards in a week either It depends a lot on what you're mining. Sometimes having an intensity too high will lower your hash rate significantly. Just keep trying until you find the best one for your cards (usually between 20 and 25 for me), it shouldn't take more than a few minutes. Is the sweet spot the highest intensity that doesn’t affect hashrate and doesn’t cause rejects?
|
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
January 30, 2018, 12:54:14 PM |
|
Did over .008 in 24hrs (12 x 1080ti's) on phi on ahashpool... was actually better than blake2s. Going to keep it going and see what happens over the next day or 2.
|
|
|
|
Lubrifiant
Newbie
Offline
Activity: 51
Merit: 0
|
|
January 30, 2018, 01:58:10 PM |
|
Did over .008 in 24hrs (12 x 1080ti's) on phi on ahashpool... was actually better than blake2s. Going to keep it going and see what happens over the next day or 2.
you're doing mono algo on ahash ?
|
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
January 30, 2018, 02:43:17 PM |
|
Did over .008 in 24hrs (12 x 1080ti's) on phi on ahashpool... was actually better than blake2s. Going to keep it going and see what happens over the next day or 2.
you're doing mono algo on ahash ? Yeah, I always only do 1 algo. I did quite a bit of testing with 2 x 6x1080ti rigs and found that the over a day or so the 24hr actual always beat the current and that the mono always beat all of them. I did it over a week or so and didn't keep the best notes but a close second was a 1 hr switch off a 24hr actual. I get up and check the 24hr actual and point everything at it, regardless of pool or algo. I do keep an eye on the 24hr as some pop into the top and out of it pretty quick and I don't usually go for those. Been a lot of Blake2s lately, but I've seen phi get into it a bit more lately so I thought I'd pop on it and so far it has done well...actually most I was getting on Blake2s over the last week was a bit over .006 so to see a .008 over 24hrs was nice. I'll run with it for a bit and keep an eye on the 24 hr actuals. What have you been mining?
|
|
|
|
EfEks
Newbie
Offline
Activity: 7
Merit: 0
|
|
January 30, 2018, 03:11:20 PM |
|
Did over .008 in 24hrs (12 x 1080ti's) on phi on ahashpool... was actually better than blake2s. Going to keep it going and see what happens over the next day or 2.
What miner are you using and how many MH/s per card @ your TDP% ?
|
|
|
|
Lubrifiant
Newbie
Offline
Activity: 51
Merit: 0
|
|
January 30, 2018, 04:44:08 PM |
|
Did over .008 in 24hrs (12 x 1080ti's) on phi on ahashpool... was actually better than blake2s. Going to keep it going and see what happens over the next day or 2.
you're doing mono algo on ahash ? Yeah, I always only do 1 algo. I did quite a bit of testing with 2 x 6x1080ti rigs and found that the over a day or so the 24hr actual always beat the current and that the mono always beat all of them. I did it over a week or so and didn't keep the best notes but a close second was a 1 hr switch off a 24hr actual. I get up and check the 24hr actual and point everything at it, regardless of pool or algo. I do keep an eye on the 24hr as some pop into the top and out of it pretty quick and I don't usually go for those. Been a lot of Blake2s lately, but I've seen phi get into it a bit more lately so I thought I'd pop on it and so far it has done well...actually most I was getting on Blake2s over the last week was a bit over .006 so to see a .008 over 24hrs was nice. I'll run with it for a bit and keep an eye on the 24 hr actuals. What have you been mining? It's interesting, because I use ahash too, and I have 12x GTX 1080 ti on 2 rigs too I'm doing multialgo with ahash and nemosminer, I'm doing 0,0065 per day these lasts days. I have a good overview about efficient algo with GTX 1080 ti currently
|
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
January 30, 2018, 04:58:04 PM |
|
Did over .008 in 24hrs (12 x 1080ti's) on phi on ahashpool... was actually better than blake2s. Going to keep it going and see what happens over the next day or 2.
you're doing mono algo on ahash ? Yeah, I always only do 1 algo. I did quite a bit of testing with 2 x 6x1080ti rigs and found that the over a day or so the 24hr actual always beat the current and that the mono always beat all of them. I did it over a week or so and didn't keep the best notes but a close second was a 1 hr switch off a 24hr actual. I get up and check the 24hr actual and point everything at it, regardless of pool or algo. I do keep an eye on the 24hr as some pop into the top and out of it pretty quick and I don't usually go for those. Been a lot of Blake2s lately, but I've seen phi get into it a bit more lately so I thought I'd pop on it and so far it has done well...actually most I was getting on Blake2s over the last week was a bit over .006 so to see a .008 over 24hrs was nice. I'll run with it for a bit and keep an eye on the 24 hr actuals. What have you been mining? It's interesting, because I use ahash too, and I have 12x GTX 1080 ti on 2 rigs too I'm doing multialgo with ahash and nemosminer, I'm doing 0,0065 per day these lasts days. I have a good overview about efficient algo with GTX 1080 ti currently Very cool...Most of my testing was done through Nemos setup as well. .0065 is a little better than was I was doing pointed at Blake2s... My cards are EVGA SCII 85% TDP +80 core +100 mem. Doing the math out for the last 4 hours (which will vary greatly) but I'm looking at .0076 for 24hrs on pointed solely at phi on ahash right now. You using Nemos current or 24hr BAT? And all algos? What Interval and percentage?
|
|
|
|
Lubrifiant
Newbie
Offline
Activity: 51
Merit: 0
|
|
January 30, 2018, 05:23:10 PM |
|
Did over .008 in 24hrs (12 x 1080ti's) on phi on ahashpool... was actually better than blake2s. Going to keep it going and see what happens over the next day or 2.
you're doing mono algo on ahash ? Yeah, I always only do 1 algo. I did quite a bit of testing with 2 x 6x1080ti rigs and found that the over a day or so the 24hr actual always beat the current and that the mono always beat all of them. I did it over a week or so and didn't keep the best notes but a close second was a 1 hr switch off a 24hr actual. I get up and check the 24hr actual and point everything at it, regardless of pool or algo. I do keep an eye on the 24hr as some pop into the top and out of it pretty quick and I don't usually go for those. Been a lot of Blake2s lately, but I've seen phi get into it a bit more lately so I thought I'd pop on it and so far it has done well...actually most I was getting on Blake2s over the last week was a bit over .006 so to see a .008 over 24hrs was nice. I'll run with it for a bit and keep an eye on the 24 hr actuals. What have you been mining? It's interesting, because I use ahash too, and I have 12x GTX 1080 ti on 2 rigs too I'm doing multialgo with ahash and nemosminer, I'm doing 0,0065 per day these lasts days. I have a good overview about efficient algo with GTX 1080 ti currently Very cool...Most of my testing was done through Nemos setup as well. .0065 is a little better than was I was doing pointed at Blake2s... My cards are EVGA SCII 85% TDP +80 core +100 mem. Doing the math out for the last 4 hours (which will vary greatly) but I'm looking at .0076 for 24hrs on pointed solely at phi on ahash right now. You using Nemos current or 24hr BAT? And all algos? What Interval and percentage? Yes nemosminer v2.4.1 Interval 90 5% diff for the switch Current, not 24h.bat Inno3d GTX 1080 ti x3, 82% power, +75 core, +300mem MSI GTX 1080 Ti Gaming X, 84%, +150, +300 Previous versions of nemosminer had a 5 minutes interval With 30-60 seconds it switch too often I think.
|
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
January 30, 2018, 05:26:22 PM |
|
Very interesting...Thanks for sharing. I actually stopped using intervals that low, maybe I shouldn't of! I noticed that some algos take several mins to get up to full hash. I will for sure take another look at that method in the future.
|
|
|
|
Lubrifiant
Newbie
Offline
Activity: 51
Merit: 0
|
|
January 30, 2018, 05:38:04 PM |
|
Very interesting...Thanks for sharing. I actually stopped using intervals that low, maybe I shouldn't of! I noticed that some algos take several mins to get up to full hash. I will for sure take another look at that method in the future.
Yeah exactly, and sometimes it takes 3 to 4 minutes for 3 or 4 gpu to start hashing It do not happen often, but it happen I'm using blake2s, lyra2re2, phi tribus skein x17 nist5 skunk neoscrypt I was thinking about disable some algos
|
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
January 30, 2018, 05:40:10 PM |
|
I've thought about doing a test and running 2 instances of nemos each with 3 cards. Because it seems that the delay getting to full hash is a delay in adding all 6 cards...? Might be worth looking at
|
|
|
|
|