YACoin Windows 7 x64 [SSSE3 and AVX support] / x86 miner

[Gazza1]

Where is this coin traded?

[1714882314]

1714882314

[1714882314]

1714882314

[1714882314]

1714882314

[dbbit]

Glad to have another miner on the coin

My Xeon isn't very impressive either.  It's 24 cores and tops out at 1.5 KH/sec - the newer generation of CPU's are just so much more efficient and faster that I don't even use it right now.

Well, thanks for my 3 blocks so far .

Is there anyway on your cpuminer release to see current difficulty and best share?

[Thirtybird]

Glad to have another miner on the coin

My Xeon isn't very impressive either.  It's 24 cores and tops out at 1.5 KH/sec - the newer generation of CPU's are just so much more efficient and faster that I don't even use it right now.

Well, thanks for my 3 blocks so far .

Is there anyway on your cpuminer release to see current difficulty and best share?

I have plans and thoughts on converting the interface to be more akin to YACMiner (GPU miner) using curses, but I just haven't gotten that far..

[vertoe]

Is it possible to add --nfmin --nfmax and --ntime command line arguments?

That would enable this miner to work with any scrypt-jane coin. :-)

[Janu$$]

Is it possible to add --nfmin --nfmax and --ntime command line arguments?

That would enable this miner to work with any scrypt-jane coin. :-)

+1

Much more people could use your miner!

[ivanlabrie]

Is it possible to add --nfmin --nfmax and --ntime command line arguments?

That would enable this miner to work with any scrypt-jane coin. :-)

Get the 3.4.2 version, it already has those commands.

[Thirtybird]

Is it possible to add --nfmin --nfmax and --ntime command line arguments?

That would enable this miner to work with any scrypt-jane coin. :-)

Get the 3.4.2 version, it already has those commands.

This is the CPU miner - those commands have not been added to that miner.  Haven't really worked on it in some time.  Maybe - but there's only been two people requesting.

[ivanlabrie]

Is it possible to add --nfmin --nfmax and --ntime command line arguments?

That would enable this miner to work with any scrypt-jane coin. :-)

Get the 3.4.2 version, it already has those commands.

This is the CPU miner - those commands have not been added to that miner.  Haven't really worked on it in some time.  Maybe - but there's only been two people requesting.

Oh, my bad!

Wrong thread!!!

[VirosaGITS]

Is this only for YAC?

I'm trying to mine us.clevermining.com but any of those additional .exe won't run with

minerd.exe --url=stratum+tcp://us.clevermining.com:3333 --userpass=user:pass -t 10

nor same above but based on minerd_scrypt_jane_x64_ssse3.exe -a scrypt-jane -o http://URL:PORT -O USER:PASSWORD

nor a combination of new exe with -o instead of --url= and vis versa.

I'm just trying to get the most out of my i3-3220, i get 24 kh/s with pooler's 2.3.3

-V

[Thirtybird]

Is this only for YAC?

I'm trying to mine us.clevermining.com but any of those additional .exe won't run with

minerd.exe --url=stratum+tcp://us.clevermining.com:3333 --userpass=user:pass -t 10

nor same above but based on minerd_scrypt_jane_x64_ssse3.exe -a scrypt-jane -o http://URL:PORT -O USER:PASSWORD

nor a combination of new exe with -o instead of --url= and vis versa.

I'm just trying to get the most out of my i3-3220, i get 24 kh/s with pooler's 2.3.3

-V

clevermining is a scrypt multi-pool.  You're specifying the wrong algorithm.

try "-a scrypt"

[Janu$$]

Is it possible to add --nfmin --nfmax and --ntime command line arguments?

That would enable this miner to work with any scrypt-jane coin. :-)

Get the 3.4.2 version, it already has those commands.

This is the CPU miner - those commands have not been added to that miner.  Haven't really worked on it in some time.  Maybe - but there's only been two people requesting.

Just we 2 have found your thread
Have a look at the ultracoin thread. Ultracoin is based on scrypt jane. And the ultracoin community is looking for a descent cpuminer because the n-factor is 11 and next month 12. GPU mining starts getting problematic. Cpumining is the future for ultracoin.
It would be great if you could integrate the 3 command line arguments.

Hope you could make it,
Janus

PS:
After integration you might rename your miner to sjcpuminer or just sjminer to signalize that it is for scrypt jane mining.

[vertoe]

Is it possible to add --nfmin --nfmax and --ntime command line arguments?

That would enable this miner to work with any scrypt-jane coin. :-)

Get the 3.4.2 version, it already has those commands.

This is the CPU miner - those commands have not been added to that miner.  Haven't really worked on it in some time.  Maybe - but there's only been two people requesting.

Just we 2 have found your thread
Have a look at the ultracoin thread. Ultracoin is based on scrypt jane. And the ultracoin community is looking for a descent cpuminer because the n-factor is 11 and next month 12. GPU mining starts getting problematic. Cpumining is the future for ultracoin.
It would be great if you could integrate the 3 command line arguments.

Hope you could make it,
Janus

PS:
After integration you might rename your miner to sjcpuminer or just sjminer to signalize that it is for scrypt jane mining.

+1 :-)

[Thirtybird]

Is it possible to add --nfmin --nfmax and --ntime command line arguments?

That would enable this miner to work with any scrypt-jane coin. :-)

I slaved all night, and added command line options requested and called it version 2.4.0
--nfmin
--nfmax
--starttime
(the same ones as YACMiner - The AMD GPU Miner I'm maintaining)

I also put in a few other fixes from the main cpuminer branch.  Source is all there - Will do Windows binary release in the next day or two.

[Thirtybird]

Will do Windows binary release in the next day or two.

Okay, I lied... Windows binary release is published

https://github.com/Thirtybird/cpuminer/releases

[ivanlabrie]

Will do Windows binary release in the next day or two.

Okay, I lied... Windows binary release is published

https://github.com/Thirtybird/cpuminer/releases

You're the N factor baws xD

[brian1997]

Features:
- I haven't finished it yet but sources is included
- compiled under VS2010
- sha256 and scrypt not work, i haven't enough time to fix it. Only scrypt-jane works correctly.
- command line parameters supported only in Win style ("-o" but not "--url").

AVX support started from Windows 7 x64 SP1, check your version of OS.

[Thirtybird]

Features:
- I haven't finished it yet but sources is included
- compiled under VS2010
- sha256 and scrypt not work, i haven't enough time to fix it. Only scrypt-jane works correctly.
- command line parameters supported only in Win style ("-o" but not "--url").

AVX support started from Windows 7 x64 SP1, check your version of OS.

huh?  We're talking about what I've been maintaining and updating.  My releases have x86 and x64 binaries compiled optimized for 6 different architectures.  It supports SHA256, scrypt, and scrypt-chacha - they all work.

[lazydemon]

i am having amd fx 6300 6 core processor with 4GB of ram , window 7 32-bit
But not getting good speed
my speed is about 0.05kh/s per core thread on ssse3 and m unable to run AVX (not responding)
i ve installed latest vesrion of Visual C++ redistributable ... M i doing something wrong ??
Help me really appreciated !

[ivanlabrie]

i am having amd fx 6300 6 core processor with 4GB of ram , window 7 32-bit
But not getting good speed
my speed is about 0.05kh/s per core thread on ssse3 and m unable to run AVX (not responding)
i ve installed latest vesrion of Visual C++ redistributable ... M i doing something wrong ??
Help me really appreciated !

Use a 64bit Os...I get 0.5kh/s out of a similar chip.

[ballot]

doesnt it support stratum pools