### A ChainWorks Industries (CWI) Project - CWIgm | Simple Powerful Stable

[chrysophylax]

hi all ...

internet isp upgrade - so im down at the office ...

should be back up in a day or so ...

ill do as much as i can at home while the office upgrade is taking place ...

there is a russian guy that messed with the code of CWIgm and is claiming it as his ... ill be posting about that a little later - but PLEASE do not use ANY other miner unless it comes from us ... if you do - you run the risk of ANYTHING happening to your system - and we just simply not be able to do a thing about it ... legally - we are asking the questions ... but either way - legal or not - if you use a miner that is not from the original source ( ie - directly from us ) - then dont use it ... especially if its a hacker looking at making quick btc from themselves by hacking your systems also ...

but again - ill attend to this in another post ...

as for the pm / email ... there is WAY more than i can attend to right this minute - so ill try and get through then within the coming day ... the internet here is limited - and while the office connection if being upgraded - all we ask is a little patience ...

a few things happening in the backend - and we are looking at a few of the issues present in the current version CWIgm-0.9.8 ...

ill be back in about 24hours time ... fingers crossed ... but please continue the test and the mining at the pools ... this is more than helpful - its very important for the growth of the miner and CWI-Mining system ...

we appreciate it very much ...

#crysx

[tpd09]

hi all ...

internet isp upgrade - so im down at the office ...

should be back up in a day or so ...

#crysx

have not received any transaction for over 2 hours.

should I stop mining?

[Mikanoshi]

there is a russian guy that messed with the code of CWIgm and is claiming it as his ... ill be posting about that a little later - but PLEASE do not use ANY other miner unless it comes from us ... if you do - you run the risk of ANYTHING happening to your system - and we just simply not be able to do a thing about it ... legally - we are asking the questions ... but either way - legal or not - if you use a miner that is not from the original source ( ie - directly from us ) - then dont use it ... especially if its a hacker looking at making quick btc from themselves by hacking your systems also ...

Not code, just strings. And I'm not claiming it as mine It was clearly stated it's a cwigm and all who want an original version were encouraged to participate here.
Yes, everyone who uses 3rd party versions should first accept the risks.

[mforce]

Does anyone know which android app can be used to monitor pool with the QR code provided?

[zorvalth]

have not received any transaction for over 2 hours.

should I stop mining?

Its been almost 4 hours without the pool hitting a block. The pool should hit the block about every 70-80 minutes with the current hashrate. The last two hours before the last block the pool hit 5 blocks which was great, so its normal to be little dry now. For the last 24 hours it hit 25 blocks which was great because half of that time the pool was with almost twice less hashrate. I hope we will start hitting blocks again very soon. If it goes more than 6 -7 hours without a block we can speak about a problem but i doubt it will get to that.

[renozi]

https://i.imgur.com/SkEN1tw.png

1080s at 72% tdp

https://i.imgur.com/yYLSVgX.png

1080ti at 70% tdp, stabilized at 50mh/s

all improvements over spmod3! 

[zorvalth]

have not received any transaction for over 2 hours.

should I stop mining?

Its been almost 4 hours without the pool hitting a block. The pool should hit the block about every 70-80 minutes with the current hashrate. The last two hours before the last block the pool hit 5 blocks which was great, so its normal to be little dry now. For the last 24 hours it hit 25 blocks which was great because half of that time the pool was with almost twice less hashrate. I hope we will start hitting blocks again very soon. If it goes more than 6 -7 hours without a block we can speak about a problem but i doubt it will get to that.

And we just hit a couple blocks in the last 30 mins, so everything is good with the pool Bad thing that halfing is just in 3 hours...

[Gongolo]

Hi all, just started using CwiGm.

Up to now, I can tell it looks faster than ccminer palgin mod 1.1 (my previous and favourite miner), that was already a lot faster than tpruvot ccminer 2.2 (with skunkhash algo).
It also looks a little more power consuming though.


My stats:

--------------------------------------------------------------------------------
Speed:  133.07MH/s
--------------------------------------------------------------------------------
0.MSI GTX 1080 Ti            Speed:   52.89MH/s
1.Zotac GTX 1060 6GB      Speed:   20.06MH/s
2.ASUS GTX 1070             Speed:   30.31MH/s
3.Zotac GTX 1070             Speed:   29.41MH/s
--------------------------------------------------------------------------------
0.MSI GTX 1080 Ti            : T:74C | F:76% | P:258W | I: 25.0 | Core:1851Mhz |
1.Zotac GTX 1060 6GB         : T:71C | F:40% | P:109W | I: 25.0 | Core:1975Mhz |
2.ASUS GTX 1070              : T:73C | F:53% | P:147W | I: 25.0 | Core:1947Mhz |
3.Zotac GTX 1070             : T:73C | F:52% | P:143W | I: 25.0 | Core:1903Mhz |
--------------------------------------------------------------------------------
Scan time: 30s | DCs: 0 | User:  | Conn:0d 00:01:45 | Latency:55ms


I use Afterburner to tweak my GPUs:
- GTX 1060 6G: +125 core, +500 mem.
- GTX 1070 8G: +150 core, +500 mem.
- GTX 1080ti 11G: +0 core, +500 mem.


My current command line: -c sigt -lodiff -i 25 -u weblogin.worker

[g01dt00th]

for first: sorry for my english.

gpu's: 6x GTX Titan Xp
drivers: 385.12 beta

default bat for sigt

first start was with PL 100%, core +150, mem -500 :  driver was crashed in few seconds

second start was with PL 100%, core stock, mem stock : rig was crashed in about 4 minutes

hmm... like as ewbf in past

ok, PL 87%, core stock, mem stock : rig stable about 10 min

next, PL87%, core +150, mem stock: rig stable

intensity as auto is 21

add -i 25 to bat and run - rig stable already 30 min

http://roenko.ru/img/miner.png

what is missing: remote monitoring, like as EWBF 0.3.4b.
 

[l187l]

world record for 1070?

CPU:   0%          ChainWorks Industries beta - Version 0.9.8         [16:40:16]
Algo:Skunk      | Port: 2000 | NetDiff: 41968.2            | Block:      29964 |
Coin:signatum   | POW: 2500  | Estimated coins/day: 04.827                     |
Solved: 25.4615iff:        0 | Shares: 4.5     | Rej: 0%   | Speed:    3.050H/s|
0.MSI GTX 1070               : Shares: 4.5     | Rej: 0    | Speed:   33.38MH/s|


https://i.gyazo.com/93044ac6ff2ea254512746a647cb1b67.png

[steamcloud]

hi all,

i want to join this cwi... and already sent a pm...
i hope have a good result.
thanks...

[Gongolo]

world record for 1070?

CPU:   0%          ChainWorks Industries beta - Version 0.9.8         [16:40:16]
Algo:Skunk      | Port: 2000 | NetDiff: 41968.2            | Block:      29964 |
Coin:signatum   | POW: 2500  | Estimated coins/day: 04.827                     |
Solved: 25.4615iff:        0 | Shares: 4.5     | Rej: 0%   | Speed:    3.050H/s|
0.MSI GTX 1070               : Shares: 4.5     | Rej: 0    | Speed:   33.38MH/s|

Indeed!

Are you using afterburner?
My 1070 max is 30 mh/s.

[Gongolo]

Just a cosmetic issue: in the main screen, current block number looks +1.

[l187l]

world record for 1070?

CPU:   0%          ChainWorks Industries beta - Version 0.9.8         [16:40:16]
Algo:Skunk      | Port: 2000 | NetDiff: 41968.2            | Block:      29964 |
Coin:signatum   | POW: 2500  | Estimated coins/day: 04.827                     |
Solved: 25.4615iff:        0 | Shares: 4.5     | Rej: 0%   | Speed:    3.050H/s|
0.MSI GTX 1070               : Shares: 4.5     | Rej: 0    | Speed:   33.38MH/s|

Indeed!

Are you using afterburner?
My 1070 max is 30 mh/s.

yeah water cooled =P

[Mikanoshi]

Just a cosmetic issue: in the main screen, current block number looks +1.

Current means not yet solved I guess.

[kriengsakdo]

Hello sir

This is for my test CW 0.9.8 on nvidia 382.53
Every cards stock (Not overclock) Power 80%, Fan 60%


Algo:Tribus

Gigabyte GTX 1060 3 GB: Speed: 32.12 MH/s (Samsung)
Gigabyte 1050 Ti 4 GB : Speed: 17.57 MH/s (Hynix)
Gigabyte 1050 Ti 4 GB : Speed: 17.57 MH/s (Hynix)
Gigabyte 1050 Ti 4 GB : Speed: 17.57 MH/s (Hynix)
Zotac 1050 Ti 4 GB    : Speed: 17.74 MH/s (Samsung)
Zotac 1050 Ti 4 GB    : Speed: 17.74 MH/s (Samsung)


Algo:Skunk

Gigabyte GTX 1060 3 GB: Speed: 17.49 MH/s (Samsung)
Gigabyte 1050 Ti 4 GB : Speed: 9.37  MH/s (Hynix)
Gigabyte 1050 Ti 4 GB : Speed: 9.37  MH/s (Hynix)
Gigabyte 1050 Ti 4 GB : Speed: 9.37  MH/s (Hynix)
Zotac 1050 Ti 4 GB    : Speed: 9.46  MH/s (Samsung)
Zotac 1050 Ti 4 GB    : Speed: 9.46  MH/s (Samsung)



And my 780Ti, GTX 770 can not run the program


Thank you for your program sir

[zero_sight]

Hi can you check the TX fee you have on DNR pool - 0.07DNR is quite high!

[chrysophylax]

hi all ...

seems like i am online again - and will catch up on the posts ...

but so far - it seems all is well except for a few glitches here and there ...

we appreciate all your input and feedback ...

ill attend to the multitude of posts and pm / mails over the coming few hours ...

halving has already come and gone for signatum / skunkhash - yet mining is still going strong ...

#crysx

[Boulevard2005]

Hi guy,

I can not send pm to you.
Can you send me link to download sigt tool and guide to use?
Thanks alot

[Boulevard2005]

Adready send pm, pls send me link and guide to use

Thanks