Bitcoin Forum
March 28, 2024, 01:58:47 PM *
News: Latest Bitcoin Core release: 26.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: « 1 2 3 4 5 6 7 8 [9] 10 11 12 13 14 »  All
  Print  
Author Topic: AMD Releases Driver for DAG Issue !!!  (Read 28830 times)
g0suboy
Newbie
*
Offline Offline

Activity: 27
Merit: 0


View Profile
August 18, 2017, 10:09:11 PM
 #161

I installed this driver on my first rig win10 3x rx570 msi armor oc 4gb,2x rx570 asus 4gb both cards hynix memory, bios mod straps from 1:1500 to 2000 and 2:1500 to 2000.

On earlier drivers my cards were giving around 25mhs with 1130/1950 clock. Everything over 1950 clock would hang the card in opengl or 511 celzius error or just bsod. Tryed all sort of drivers 17.5.1,17.7.1,17.7.2, mix of 17.5.1 and 16.11.5 everything and nothing helped to get mem clock over 1950.

After installing this driver, ddu,patch,msi ab 16 i couldnt clock the cards, clock settings applyed only for gpu0. Not even fan control for the rest of the cards. Then i restarted and tryed to open msi ab first then claymore miner and i got bsod (video integrity check failoure smth like that) then i relized i needed to start clay 9.8 first then ab but still settings could be applyed only for gpu0. Then i tryed to set core clock and mem clock in claymore bat file but was getting up n downs on memory from 1000 to 1950 (-mclock 1950).

After all that i installed msi ab 15 and guess what everything works as a charm.

Downvolting,cclock,mclock,fans everything and i can even set mclock higher without crashing, now running 1170/2000 getting over 28mhs per card.

This driver is blessing for me!
Gonna install on rest of my rigs with same cards and i hope everything will work like this one.

I was unsure about installing this driver sience many ppl said they had problems with it and boy am i glad i did it Smiley
1711634327
Hero Member
*
Offline Offline

Posts: 1711634327

View Profile Personal Message (Offline)

Ignore
1711634327
Reply with quote  #2

1711634327
Report to moderator
1711634327
Hero Member
*
Offline Offline

Posts: 1711634327

View Profile Personal Message (Offline)

Ignore
1711634327
Reply with quote  #2

1711634327
Report to moderator
Bitcoin addresses contain a checksum, so it is very unlikely that mistyping an address will cause you to lose money.
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
1711634327
Hero Member
*
Offline Offline

Posts: 1711634327

View Profile Personal Message (Offline)

Ignore
1711634327
Reply with quote  #2

1711634327
Report to moderator
1711634327
Hero Member
*
Offline Offline

Posts: 1711634327

View Profile Personal Message (Offline)

Ignore
1711634327
Reply with quote  #2

1711634327
Report to moderator
1711634327
Hero Member
*
Offline Offline

Posts: 1711634327

View Profile Personal Message (Offline)

Ignore
1711634327
Reply with quote  #2

1711634327
Report to moderator
Vetal_inside
Member
**
Offline Offline

Activity: 78
Merit: 10


View Profile
August 18, 2017, 11:11:19 PM
 #162

Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

Where you found this driver for Windows 8.1? On AMD website i found just for windows 7 and windows 10.
I used win7 driver on win8.1, with win 7 compatibility option during installing.


Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

Yeah if they fixed it on the 280x we would be getting 28MH/s with those old GPUs, but they only fixed it for the GPUs that they are currently selling. Greedy bastards.
Exactly...
RfBTC
Member
**
Offline Offline

Activity: 68
Merit: 10


View Profile
August 18, 2017, 11:23:08 PM
 #163

What better power consumption in rx 570 4gb - 27.890mhz
I have 96w - 69c
1 RIG 4 RX 570 - 650w
1 RIG 3 RX 570 - 500w

I have x6  RX570 (27.15 / 27.20 Mhs  stable) with total  815w  (115w  x card + Mobo)


AMD always forgot Linux users    Sad Sad
speedyb
Full Member
***
Offline Offline

Activity: 203
Merit: 100


View Profile
August 18, 2017, 11:39:21 PM
 #164

has anyone tried mining on a 2gb card with the new driver fix? wonder with more lanes if it be doable now. out of curiosity
P00P135
Full Member
***
Offline Offline

Activity: 1122
Merit: 136


View Profile
August 18, 2017, 11:39:48 PM
 #165

Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

Where you found this driver for Windows 8.1? On AMD website i found just for windows 7 and windows 10.
I used win7 driver on win8.1, with win 7 compatibility option during installing.


Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

Yeah if they fixed it on the 280x we would be getting 28MH/s with those old GPUs, but they only fixed it for the GPUs that they are currently selling. Greedy bastards.
Exactly...

What is wrong with using free windows 10?
rhaegonz
Newbie
*
Offline Offline

Activity: 64
Merit: 0


View Profile
August 18, 2017, 11:45:27 PM
 #166

I think people use more linux for mining than windows, especially people with many rigs, why the hell they did released for windows and not for linux?  Huh
Vetal_inside
Member
**
Offline Offline

Activity: 78
Merit: 10


View Profile
August 18, 2017, 11:57:26 PM
 #167

What is wrong with using free windows 10?
I think nothing...but I use win8.1 Smiley
Skol600ml
Full Member
***
Offline Offline

Activity: 158
Merit: 100


View Profile
August 19, 2017, 12:02:43 AM
 #168

For most users with huge consumption increase:

It's because undervolting isn't working for you - You need to set up all in BIOS, find another tool that works or wait for news.

For those with drops to half performance and wierd clocks, it's because mem clock drops from 2xxx to 1000 or core clock drops to 300-900, it's due to high consumption - It's because undervolting isn't working for you - You need to set up on BIOS, find another tool that works or wait for news.

Some cards works with Afterburner Beta 15/16 / Wattool and Claymore (clocks) (especially 4xx) , some don't (mostly 580).

The fix isn't a driver side OC to compensate. If you try ubiq (no dag problem) and ETC (worse than ETH) the hashrate will be the same, the fix is real. Yet some people may experience some consumption increase (not huge - 5%, 10%) or even consumption drop.
kodokbuduk
Full Member
***
Offline Offline

Activity: 294
Merit: 100


View Profile
August 19, 2017, 01:41:27 AM
 #169

I think people use more linux for mining than windows, especially people with many rigs, why the hell they did released for windows and not for linux?  Huh

Yea right. Can someone contact AMD to get linux fix release?
weitau
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
August 19, 2017, 02:28:50 AM
 #170

Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher

Turn off Afterburner's setting to apply overclocks at startup.  You'll be in default settings on next reboot, then re-tune
antiycda
Full Member
***
Offline Offline

Activity: 140
Merit: 100



View Profile WWW
August 19, 2017, 08:16:22 AM
 #171

Can you set clock & voltage in claymore with these drivers?

check the memory log

2100 to 1000



140W power draw??? Dude, thats way beyond 200W@the wall.

back to old driver. temp & power & hashrate


snuff28
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
August 19, 2017, 12:02:30 PM
 #172

Can you set clock & voltage in claymore with these drivers?

check the memory log

2100 to 1000

https://i.imgur.com/PDITVaB.gif

140W power draw??? Dude, thats way beyond 200W@the wall.

back to old driver. temp & power & hashrate

https://i.imgur.com/6S7CiiR.gif

Hello,

i the same problem, which the old driver use?

Thank you


I had same problem with memory going from 2200 to 1000, seems the the LCD TV I was hooked up to was causing the problem. It was also crashing the pc, switched to old monitor with lower resolution and solve the problem.

Have you tried the patch?
diegomadureira
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
August 19, 2017, 02:40:13 PM
 #173

Anyone know with teamviewer keep the big screen
After disconnecting hdmi cable from gpu, screen teamviewer gets small
antiycda
Full Member
***
Offline Offline

Activity: 140
Merit: 100



View Profile WWW
August 19, 2017, 03:05:40 PM
 #174

Hi,
I have been running my rig with 4x powercolor rx 580 8gb, 2x rx 570 4gb and 1 sapphire rx 580 nitro + 8gb

after updating to this blockchain driver one of powercolor rx 580 card started to heat up very much. +5 degrees than others. I tried to run only with this card. same heat. reverted back to previous driver but heat still goes up to 75+ degrees. 4 cards are identical and only one of them causing this issue.

What do you guys think might cause the problem?

one of my rx580  hung . even i tried to install the old driver.

Metroid
Sr. Member
****
Offline Offline

Activity: 2142
Merit: 353


Xtreme Monster


View Profile
August 19, 2017, 03:10:10 PM
 #175

Tryid it on 280x
Got 12-13mh per one(8.1x64, cm9.Cool...nothing change from 15.12 driver. Stupid amd didn't applied their fix to truly good cards Sad

Yeah if they fixed it on the 280x we would be getting 28MH/s with those old GPUs, but they only fixed it for the GPUs that they are currently selling. Greedy bastards.

I predicted this. People need to understand that if rx 580 was not polaris then rx 480 would never have got the fix, so amd is giving support for only what they are selling and that is it.

BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
weitau
Newbie
*
Offline Offline

Activity: 4
Merit: 0


View Profile
August 19, 2017, 03:42:06 PM
 #176

Claymore failed for me.

Was on 1.7.1 official (@25.1 Mhs), used DDU to remove, installed Robinh00d, worked great and got 2Mh/s better.
Tried this driver - used DDU in safe mode, install Mining driver, install pixel patcher, reboot.  AB beta works, but Claymore 9.8 fails to initialize.

XFX RX 480 4 GB BIOS, modded BIOS

Spent several hours trying all the following:
  • Reinstall all drivers (after removal using DDU Safemode
  • Reinstalling windows 7
  • Reinstalling 17.7.1
  • Update with beta driver from robinh00d
  • Rearranged my two GPUs to different PCI-e slots on the motherboard

Interestingly enough, the order of the graphics cards do make a difference.  Windows was not initializing them correctly, then I moved the riser'ed GPU to the other sideo of my GPU plugged directly on the motherboard.  Windows would boot, but get black screen after Windows logo appeared.

As of now, I am sticking with the beta driver (yeah I know) and happy to have AB working for 26.4 and 29.4 mh/s on my RX 480 cards.
Mattthev
Sr. Member
****
Offline Offline

Activity: 966
Merit: 359


👉MINING-BIOS.eu💲⛏


View Profile WWW
August 19, 2017, 07:40:55 PM
 #177

Anyone know with teamviewer keep the big screen
After disconnecting hdmi cable from gpu, screen teamviewer gets small
Buy HDMI to VGA convertor.

Mining Bios with Performance Timings 👍 Mining-Bios.euPBE 1.7PBE 3 PRO👌⛏│AFFILIATE system 10% ref 💰💲BTC│👉 XMR-AEON-STAK 🔝⛏ Monero V9 (CNv4) ✅│XMRig AMD🔝⛏ CNv4 ✅
FIAT from BINANCE to REVOLUT 💳│🚀Upcoming/Active ICO list📈🤑│👉Free Bitcoin BTC Faucet💰💲│Guides:RX 470/480/570/580, VEGA Bios Mod Tutorial - SRB, PBE 💰💲│PBE.eu
CRYPTO to FIAT BTC💲💳│ How to Mine XMR/RYO and CN coins + Miners Downloads💰⛏│Guides:How to Mine AEON💰⛏
monerobiosedit@gmail.com│✅Did I help you? Give me some +Merit 🤜🤛👌
coinnoob_za
Newbie
*
Offline Offline

Activity: 46
Merit: 0


View Profile
August 19, 2017, 10:02:24 PM
 #178

As far as i know this driver does not work on Win 7.

It does work on Win 10 for RX580's. Just dont patch the driver with pixel patcher on 580's.
I used AB 4.4.0 Beta 16, works for OC settings. It however does not seem to undervolt card.
Also do not set your OC settings in the Claymore Batch file. does not work. The Driver changed the ADL API so would need an update for Claymore to fix this.
I used Global Wattman that comes with driver. Manually setting Voltage to 990mV and apply, it applies it but sometimes just reverts back to higher voltage later. Just set it back to Auto and apply then my voltage goes to 990mV again. (i do this while claymore is running)
Not even AMD software is properly controlling the Voltage..... tisk tisk AMD!
When you apply the pixel patcher and OC from the claymore batch file you get your mem clock jumping between 2150 and 1000MHz the whole time.
EVen GPU-z is reading GPU load incorrectly at 16% and mem controller 100% when it should be idle. HWinfo64 seems to read the GPU load correctly.

Managed to get my card stable at 30.5MH/s (MSI RX580 Armor 8GB) 990mV, 1250 GPU core, 2150 Mem clocks. Drawing under 100W running at 59-61C Temps. Happy will settle for that.
If running other AMD cards in the machine, and settings dont apply to others it could be because the are running headless. Might need to plug in a dummy plug into cards to make it think it has monitor connected. i know this works. Have found this with Nvidia mixed with AMD machines.
All Nvidia no problem.

AMD wont update driver again, so Claymore will hopefully soon update to fix OC and undervolt issues directly from the Miner batch file.
antiycda
Full Member
***
Offline Offline

Activity: 140
Merit: 100



View Profile WWW
August 20, 2017, 12:41:23 AM
 #179

As far as i know this driver does not work on Win 7.

It does work on Win 10 for RX580's. Just dont patch the driver with pixel patcher on 580's.
I used AB 4.4.0 Beta 16, works for OC settings. It however does not seem to undervolt card.
Also do not set your OC settings in the Claymore Batch file. does not work. The Driver changed the ADL API so would need an update for Claymore to fix this.
I used Global Wattman that comes with driver. Manually setting Voltage to 990mV and apply, it applies it but sometimes just reverts back to higher voltage later. Just set it back to Auto and apply then my voltage goes to 990mV again. (i do this while claymore is running)
Not even AMD software is properly controlling the Voltage..... tisk tisk AMD!
When you apply the pixel patcher and OC from the claymore batch file you get your mem clock jumping between 2150 and 1000MHz the whole time.
EVen GPU-z is reading GPU load incorrectly at 16% and mem controller 100% when it should be idle. HWinfo64 seems to read the GPU load correctly.

Managed to get my card stable at 30.5MH/s (MSI RX580 Armor 8GB) 990mV, 1250 GPU core, 2150 Mem clocks. Drawing under 100W running at 59-61C Temps. Happy will settle for that.
If running other AMD cards in the machine, and settings dont apply to others it could be because the are running headless. Might need to plug in a dummy plug into cards to make it think it has monitor connected. i know this works. Have found this with Nvidia mixed with AMD machines.
All Nvidia no problem.

AMD wont update driver again, so Claymore will hopefully soon update to fix OC and undervolt issues directly from the Miner batch file.

thanks

jackbox
Legendary
*
Offline Offline

Activity: 1246
Merit: 1024



View Profile
August 20, 2017, 01:36:52 AM
 #180

Anyone know with teamviewer keep the big screen
After disconnecting hdmi cable from gpu, screen teamviewer gets small
Buy HDMI to VGA convertor.

Buy and HDMI emulator dongle. When the computer reboots teamviewer will have a regular sized screen.

Buy a Trezor and Protect your BTC, BCH, BTG, DASH, LTC, DGB, ZEC, ETH and ETC from hackers.
If I was helpful please buy me a coffee BTC: 1DWK7vBaxcTC5Wd2nQwLGEoy8xdFVzGKLK  BTG: AWvN1iBqCUqG2tEh3XoVvRbdcGrAzfBBpW
If I was helpful please buy me a burger DGB: DLASV6CUQpGtGSyaVz5FYuu5YxZ17MoGQz
Pages: « 1 2 3 4 5 6 7 8 [9] 10 11 12 13 14 »  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!