The Blocks Factory - Multicoin pool

[lucazane]

I show that i was able to withdrawl, but never showed on receiving end, and BLOCK offline for transaction history, we get those coins, when new comes back or should i send a support ticket in, where do i do that?
Thanks

Sorry - this is for Hobonickel pool

you can send me a private message here with your pseudo on the pool

[1715164003]

1715164003

[1715164003]

1715164003

[1715164003]

1715164003

[1715164003]

1715164003

[lucazane]

CGB, GUN & IPC pool fee set to 3%

[MaxDZ8]

Hello lucazane, I have difficulty 1 on your DBG-qubit pool. This is way inappropriate for my miner, it should be somewhere around 0.05 for me, or even lower.
Vardiff does not seem to kick in and adding _diff256 just created another worker with a different name.
Is everything working as it should?

Edit: please also take a look at https://bitcointalk.org/index.php?topic=632503.msg10336279#msg10336279.

[MaxDZ8]

Update on the above issue: DBG-qubit pool uses --difficulty-multiplier 1 instead of the standard qubit 256 multiplier. Albeit this is apparent once one checks worker status, it should be noted in setup instruction.

Of course, I would much rather see the pool move to the appropriate difficulty multiplier but that's it.

[ThePhwner]

Just in case some of us aren't aware of the basics of mining, suddenly throwing ~40 Th/s on to a pool for a small-ish coin (DGB) that wasn't 40 Th/s in the first place... pretty much wrecks the diff and the pool efficiency. Glad you decided to jump on board on an upswing of this coin but you might want to contemplate the technical aspects of how you mine and how to do so profitably.

[antonio8]

Update on the above issue: DBG-qubit pool uses --difficulty-multiplier 1 instead of the standard qubit 256 multiplier. Albeit this is apparent once one checks worker status, it should be noted in setup instruction.

Of course, I would much rather see the pool move to the appropriate difficulty multiplier but that's it.

I am using a GTX970 and getting 11.6 Mh/s on my miner but the pool never shows above 4.6 Mh/s. I set the difficulty to 1.

Is there something else I need to do? I am on Windows 7 64 bit.

[marecek666]

hi, I do not know why but using TBF neoscrypt pools (FTC,IPC,PXC) my invalid shares are too high. I am running cpuminer and there are a lot of stratum connection interruptions and after that invalid shares until the request for work restart from stratum server. This is only on TBF servers. Everything is OK with other non-TBF pools. There is 10-40% invalid shares for me on TBF. I have almost 100% valid shares on other neoscrypt pools. My connection is via fibre 100mbps and it works OK. I tried to set exact diff for my 12KH worker (1,2,4,8) and vardiff too, but it is the same - almost  40% invalid hashrate. Please check it.

it is the same situation as this one:

Hi,

I'm mining on the DGB Qubit pool with 4 PC's each has 2 280x cards in them. However SGMiner is reporting a lot of interrupts from the pool. I'm guessing the difficulty is too hight. I have placed the "_diff1" at the end of my user in my bat file but it is still doing it. How should I go about configuring up SGMiner?

Cheers,

Wiz

invalid shares getting after every stratum connection interruption caused by the TBF pool for sure. And it is more than several times a day. In fact it is only about 40% valid hashrate for me today :-(

[tbearhere]

@lucazane
Hi I'm mining at 52 mh/s and your pool is showing 27mh/s. After 1 hour. What is happening ? Did you up your pool fees to 50% ? I mined at your pool in the past and everything was ok..the usual displayed pay per mh/s 25% above what it really is...and worker difficulty set to 1 when it should be .02 for gpu's. Whats going on plz. Only showing 27mh/s throwing in 52mh/s.dgb-qubit
Thx
EDIT:I have the problem solved. Thanks.

[MaxDZ8]

Hi I'm mining at 52 mh/s and your pool is showing 27mh/s. After 1 hour. What is happening ?

I can reply to that.
The server knows nothing about your miner. There's no way for it to know how much hashpower you have.
The server tries to guess your hashpower by looking at how often you send results and how good the results are. Both are random so it's fairly usual to have half the estimate, or twice as much.

I mined at your pool in the past and everything was ok..the usual displayed pay per mh/s 25% above what it really is...and worker difficulty set to 1 when it should be .02 for gpu's. Whats going on plz. Only showing 27mh/s throwing in 52mh/s.dgb-qubit

This. DBG qubit requires --difficulty-multiplier 1 as far as I can tell.

[tbearhere]

Hi I'm mining at 52 mh/s and your pool is showing 27mh/s. After 1 hour. What is happening ?

I can reply to that.
The server knows nothing about your miner. There's no way for it to know how much hashpower you have.
The server tries to guess your hashpower by looking at how often you send results and how good the results are. Both are random so it's fairly usual to have half the estimate, or twice as much.

I mined at your pool in the past and everything was ok..the usual displayed pay per mh/s 25% above what it really is...and worker difficulty set to 1 when it should be .02 for gpu's. Whats going on plz. Only showing 27mh/s throwing in 52mh/s.dgb-qubit

This. DBG qubit requires --difficulty-multiplier 1 as far as I can tell.

Its the pool...I was on another pool and it worked great.

[MaxDZ8]

Yes, it's the pool. I really meant to say DBG qubit on blocksfactory.

[tbearhere]

Yes, it's the pool. I really meant to say DBG qubit on blocksfactory.

Anyone mining here Qubit algo with ccminer? I bet I get no answers because they left when they saw there hash cut in half. All amd and asic  .

[lucazane]

Yes, it's the pool. I really meant to say DBG qubit on blocksfactory.

Anyone mining here Qubit algo with ccminer? I bet I get no answers because they left when they saw there hash cut in half. All amd and asic  .

I don't have a cuda capable card so, I can't investigate the problem. Sorry

[lucazane]

I will close the HBN pool at the end of the month, please withdraw your coins

[fullintegrity]

this one never made it, please help http://hbn.blockx.info/tx/e7e8e34fabf0785eafa3fecc01fb489be1683d72ae0db17c227a4258aef02816

[lucazane]

this one never made it, please help http://hbn.blockx.info/tx/e7e8e34fabf0785eafa3fecc01fb489be1683d72ae0db17c227a4258aef02816

Since the transaction is ok on the blockchain, we can't do anything.
-exchange wallet ? : tell the exchange support,
-personal wallet ? : check if you have the block count(getblockcount on the debug page), you can compare here : http://hbn.cryptocoinexplorer.com/, if not , seek support on the HBN thread.

[iju76]

Hi, I forgot the PIN code from the pool of pxc. What do I do?

 User Id:12271

[iju76]

Hi, I forgot the PIN code from the pool of pxc. What do I do?

 User Id:12271

New - User Id:13147

 Thanks you

[moondrelor]

I am going to start mining soon at about 45mh/s.
About how much will this raise the difficulty?
For FeatherCoin

[lucazane]

I am going to start mining soon at about 45mh/s.
About how much will this raise the difficulty?
For FeatherCoin

~ 15%