The Blocks Factory - Multicoin pool

[funnyboy027]

hi, what is the best diff number for my rig 6x 1080ti with 5.8GH/s

[ioglnx]

Well the variance is so heavy that it is hard to tell even with my 12.000MH I have problems getting over 2000DGB.
The past days I made 4500-6000DGB per day and more.

Atm the pool again stuck.

I see, do you know if increasing difficulty would help?

Also are you using 18x GTX1080Ti to achieve those figures? 

12 Cards running for DGB each is doing around 1GH of SKEIN.

[jake217]

I am using a Antminer S5 1.15 th and i cant get the difficulty to adjust any less than 2048 on sha256 any idea how?

[Narkano]

Trying my first ever go at ccminer using Qubit to mine DGB.  Registered, set up a worker.
Am I doing this right?  My GPU is at 100% but otherwise I'm not sure.  

 ccminer.exe -q -a qubit -o stratum+tcp://s1.theblocksfactory.com:9000 -u Me.user -p pass

"GPU#0: Intensity set to 19, 524288 cuda threads"

Update - Never mind, I'm running on 2 comps now and successfully mined a couple coins, my test GPU was just significantly slower than the 1070.

[Nokia555]

Can somebody help with the difficutly setting? Getting too many rejects.

Valid hahsrate   Invalid hahsrate
1.03 GH/s           234.56 MH/s(18.53%)

I have 1x1080TI, 1070, 1060 3gb, 3 devices set from pool management. vardiff enabled.

[QuintLeo]

what am i doing wrong here?

My workers are from here theblocksfactory.com and they have very less info on help section so i need help from you guys

i also did this and i get the error

Code:

./cgminer --scrypt  -o stratum+tcp://stratum.dgb.theblocksfactory.com:9002 -u darkroom.1 -p j

stratum+tcp://s1.theblocksfactory.com:9004   for DGB-scrypt.


 

[QuintLeo]

Trying my first ever go at ccminer using Qubit to mine DGB.  Registered, set up a worker.
Am I doing this right?  My GPU is at 100% but otherwise I'm not sure.  

 ccminer.exe -q -a qubit -o stratum+tcp://s1.theblocksfactory.com:9000 -u Me.user -p pass

"GPU#0: Intensity set to 19, 524288 cuda threads"

Update - Never mind, I'm running on 2 comps now and successfully mined a couple coins, my test GPU was just significantly slower than the 1070.

 You do realise that Qubit is mineable by the Baikal ASIC?

 Dunno if you're going to be profitable trying to compete against those with a GPU.

[Narkano]

I did not, but tried Groestl and got double the rate so stayed on that a while, for a much nicer return.  Like I said, my first time ever.  I will likely start caring about ASICs once I get the hang of it.

[Tuner77]

Anyone know why What To Mine's main GPU comparison page shows DGB-Groestl(DGB) with "Myriad-Groestl" and a black circle with an "i" in it? (can't click on it). It's listed as the top GPU coin/algo for CUDA, but seems to report a value higher than what I get. If I mine with Groestl, I get about 110Mh/s per 1080Ti, and I get the exact same speed with myriad-groestl, and the same payout, both of which are lower than WTM's comparison page reports.

When you click on "DGB-Groestl(DGB)" and enter your values on that page, it shows a lower payout than on the main comparison page, and it's more accurate with actual pool earnings, but doesn't mention myriad-groestl, only groestl. There is no page to specifically for Myriad-Groestl-DGB (that I can find).

I'm not even mining DGB with either algo (using skein). I just want to make sure there isn't a myriad-groestl miner out there that gets much higher values than skein.

[Mister_E]

Okay, had it working, tried some other miner, did a full windows reinstall... now cant get it to work. I'm just trying the basic commandline from the site, with my username and miner number.

What i get is the startscreen with the jansson 2.7 line. then the screen dissapears. Am I missing something? It worked like this before, also on a clean windows install....

sgminer.exe -k myriadcoin-groestl -o stratum.dgb-groestl.theblocksfactory.com:9003 -u Mister_E.M1 -p xXx -I 20

[Azateq]

Anyone know why What To Mine's main GPU comparison page shows DGB-Groestl(DGB) with "Myriad-Groestl" and a black circle with an "i" in it? (can't click on it). It's listed as the top GPU coin/algo for CUDA, but seems to report a value higher than what I get. If I mine with Groestl, I get about 110Mh/s per 1080Ti, and I get the exact same speed with myriad-groestl, and the same payout, both of which are lower than WTM's comparison page reports.

When you click on "DGB-Groestl(DGB)" and enter your values on that page, it shows a lower payout than on the main comparison page, and it's more accurate with actual pool earnings, but doesn't mention myriad-groestl, only groestl. There is no page to specifically for Myriad-Groestl-DGB (that I can find).

I'm not even mining DGB with either algo (using skein). I just want to make sure there isn't a myriad-groestl miner out there that gets much higher values than skein.

Mainpage ist Groestl ~ the ! says groestl * 1.5  = myr gr

[Tuner77]

Anyone know why What To Mine's main GPU comparison page shows DGB-Groestl(DGB) with "Myriad-Groestl" and a black circle with an "i" in it? (can't click on it). It's listed as the top GPU coin/algo for CUDA, but seems to report a value higher than what I get. If I mine with Groestl, I get about 110Mh/s per 1080Ti, and I get the exact same speed with myriad-groestl, and the same payout, both of which are lower than WTM's comparison page reports.

When you click on "DGB-Groestl(DGB)" and enter your values on that page, it shows a lower payout than on the main comparison page, and it's more accurate with actual pool earnings, but doesn't mention myriad-groestl, only groestl. There is no page to specifically for Myriad-Groestl-DGB (that I can find).

I'm not even mining DGB with either algo (using skein). I just want to make sure there isn't a myriad-groestl miner out there that gets much higher values than skein.

Mainpage ist Groestl ~ the ! says groestl * 1.5  = myr gr

Weird. It didn't show anything when I hovered over it. Anyhow, none of the popular miners seem to give 1.5 groestl with myr-gr, or at least not ccminer.

[Azateq]

Hm? You just put in 40 MH's if your MHs is 60 with myr gr. I guess?

I think ccminer uses myr gr algo already, so my 1070 shows 70mhs.

[forpublic]

Withdrawn my account just now, the transactions page shows it, but the link goes to an unknown transaction.
The address is right, but the digiexplorer says "Transaction not found". And my wallet doesn't show it.
WTF? Anybody knows how to deal with it?

[forpublic]

Withdrawn my account just now, the transactions page shows it, but the link goes to an unknown transaction.
The address is right, but the digiexplorer says "Transaction not found". And my wallet doesn't show it.
WTF? Anybody knows how to deal with it?

Never mind, I got it. "Fast" DGB transactions can take half an hour to complete.

[dadach]

what is happening with SHA pool?

[Gans888]

Hi! I'm new miner. Sorry me for my english.I have 1 question. Hours ago I run test miner in your pool. I see hashrate in your dashboard. I see increasing balance. But now moment I see only hashrate and balance = 0. I not activated autopay and I not indicated the address for pays. What is this? My userID 26750.

[shitobu]

There is something wrong with my account.
I've been mining for over 30mins but my hash rate on the website doesn't change.

Code:

ccminer --algo=skein -o stratum+tcp://s1.theblocksfactory.com:9001 -u myuserername.myworker -p myworkerpassword

This is the code I've been using. Is the address wrong?

Also, in the ccminer it shows that my hash rates are normally, like if I was true mining.
But it doesn't update on website...


WAIT, LOL.
The hash rates change depending on what algorithm you have selected on the website.
It shows my rates now.

[waveyuk]

There is still an issue with the SHA pool, can someone update us please.

[Gans888]

Hi! I'm new miner. Sorry me for my english.I have 1 question. Hours ago I run test miner in your pool. I see hashrate in your dashboard. I see increasing balance. But now moment I see only hashrate and balance = 0. I not activated autopay and I not indicated the address for pays. What is this? My userID 26750.

Please, sorry newbie, I see another crypt method when I see balance