Antminer D3 Blissz firmware (10/12 v1.12 update)

[chase.pxelplus]

I updated the firmware using the link in page 31 (21/11 recommended UPDATE) and set the following

Fan percentage to 30%

Global settings
Frequency: 431M
Asic volatge: lowest

Chain 1
Frequency: 462M
Asic volatge: 1

Chain 2
Frequency: Use global
Asic volatge: Use global

Chain 3
Frequency: 425M
Asic volatge: 1

Been running for about 1hr and I have a HW 5 in chain 1 with discarded 2,177 on my main pool. Is this normal? What's the meaning of HW 5 and discarded? I'm new on using an asic miner.

https://drive.google.com/file/d/1WVTntaP57RZELlobqCan09wAbBjTyyPv/view

Something's wrong with your pool, i wouldn't suggest you use zpool, not reliable, i still remember that 20% hidden fees, use granatgas-pool instead.

Thanks, I'll switch to granatgas-pool. It seems https://granatgas-pool.info/ is down.

Try this http://granatgas-pool.info/ without s

Thanks, it's working

[chase.pxelplus]

Thanks blissz  Keep it up. No more scandalous D3. Temp(PCB) 60-67 while Temp(Chip) 73-82. 815W on my wall with 16.4 GH/s 

[may142012]

Thanks blissz  Keep it up. No more scandalous D3. Temp(PCB) 60-67 while Temp(Chip) 73-82. 815W on my wall with 16.4 GH/s 

Still remember that 20% hidden feessssssssssssssssssssssssssssssssssssssss

[fecell]

Still remember that 20% hidden feessssssssssssssssssssssssssssssssssssssss

20!? wth?!
86400     100% (mining time in sec)
  1296      1.5% (time for mining fee in sec)

[may142012]

Still remember that 20% hidden feessssssssssssssssssssssssssssssssssssssss

20!? wth?!
86400     100% (mining time in sec)
  1296      1.5% (time for mining fee in sec)

I was talking about zpool, not the firmware.

[Patriot872]

Is possible to install the L3+ firmware on D3?

I had this same question in my head for the first 21 pages of this forrum.
reading thru the other pages now, but had to comment on this

Guys i haven't seen it commented on yet , but everyone should know -
THE VAST MAJORITY OF THESE ARE STILL TO REACH THEIR BUYERS.
* from the production numbers i heard, there's approx 18,000 of these for november batch & 21,000 Dec Batch + still selling at times

As a community how can we collectively spread this hashing and work together to create a solid result for everyone.
We have 30 of these, and 25 A5's coming from Inno in the next 12-20 days
** We would be happy to offer financial assistance to a team that wants to work on developing Some Additional Progress

Thanks for the original Blitzsss Poster for his efforts so far.
I look forward to additional information, and details on how we can help ( No Programming or Electrical Engineering Knowledge Here )

[fecell]

Is possible to install the L3+ firmware on D3?

I had this same question in my head for the first 21 pages of this forrum.
reading thru the other pages now, but had to comment on this

It's impossible. It's like flash Samsung s4 by firmware from Samsung s9.
Some part same, but many other is different.

[Searing]

Is possible to install the L3+ firmware on D3?

I had this same question in my head for the first 21 pages of this forrum.
reading thru the other pages now, but had to comment on this

Guys i haven't seen it commented on yet , but everyone should know -
THE VAST MAJORITY OF THESE ARE STILL TO REACH THEIR BUYERS.
* from the production numbers i heard, there's approx 18,000 of these for november batch & 21,000 Dec Batch + still selling at times

As a community how can we collectively spread this hashing and work together to create a solid result for everyone.
We have 30 of these, and 25 A5's coming from Inno in the next 12-20 days
** We would be happy to offer financial assistance to a team that wants to work on developing Some Additional Progress

Thanks for the original Blitzsss Poster for his efforts so far.
I look forward to additional information, and details on how we can help ( No Programming or Electrical Engineering Knowledge Here )

We need to pump the Helium x11 coin when it comes out as the greatest coin ever

or

We need to make out OWN x11 coin..which is dubious at best an idea.....perhaps call it FUbitmain


(Well, hell, I can always use it as a 'space heater' in the winter or in the summer as a 'doorstop' ..er wait ..I have 2....DAMN IT)

[may142012]

Is possible to install the L3+ firmware on D3?

I had this same question in my head for the first 21 pages of this forrum.
reading thru the other pages now, but had to comment on this

Guys i haven't seen it commented on yet , but everyone should know -
THE VAST MAJORITY OF THESE ARE STILL TO REACH THEIR BUYERS.
* from the production numbers i heard, there's approx 18,000 of these for november batch & 21,000 Dec Batch + still selling at times

As a community how can we collectively spread this hashing and work together to create a solid result for everyone.
We have 30 of these, and 25 A5's coming from Inno in the next 12-20 days
** We would be happy to offer financial assistance to a team that wants to work on developing Some Additional Progress

Thanks for the original Blitzsss Poster for his efforts so far.
I look forward to additional information, and details on how we can help ( No Programming or Electrical Engineering Knowledge Here )

Yeah, we all should buy 100 D3 and 100 A5 like you, so we all can double, no i mean triple the difficult, so we will never ROI.

[minerdummy]

Hi.

Thanks blissz for your great work and the ideas you brought with it. And I guess the dev fee is kind of high but acceptable given the power savings. Someone with a little linux skills could easily removepool the 3rd and 4th pools... I have an L3+ miner and I am going to try to undervolt it by the end of this week thanks to your input...

It's cool someone figured out that the PIC programs are identical on L3+ and D3. It's hard to believe (for me) how an 8-bit uc could manage all that necessary "algoswitching" in that short amount of time. So, maybe it just takes car of the control and maybe sending the hashids to the right address...

Can someone comment onhttps://en.wikipedia.org/wiki/NIST_hash_function_competition
For me it seems that all the X11 and probably X15 are somehow similar and related to SHA3 algorithms... And maybe that is what the ASICS were designed for...

Could be, that the ASICS give a result based on its input length and format. So, that for example the PIC or the A8 board adds some value before/after the hash and the ASICS process the input based on that... So, if they are all somehow similar and the ASICS were designed in the multipurpose way it could explain why they aren't that effective as the L3 and BTC miners. (would be typical chinese by the way...) And when the other algos become more profitable the D3 might be rebranded with just a firmware upgrade...

Any thoughts about that? Thanks.

[Wananavu99]

Is possible to install the L3+ firmware on D3?

I had this same question in my head for the first 21 pages of this forrum.
reading thru the other pages now, but had to comment on this

Guys i haven't seen it commented on yet , but everyone should know -
THE VAST MAJORITY OF THESE ARE STILL TO REACH THEIR BUYERS.
* from the production numbers i heard, there's approx 18,000 of these for november batch & 21,000 Dec Batch + still selling at times

As a community how can we collectively spread this hashing and work together to create a solid result for everyone.
We have 30 of these, and 25 A5's coming from Inno in the next 12-20 days
** We would be happy to offer financial assistance to a team that wants to work on developing Some Additional Progress

Thanks for the original Blitzsss Poster for his efforts so far.
I look forward to additional information, and details on how we can help ( No Programming or Electrical Engineering Knowledge Here )

We need to pump the Helium x11 coin when it comes out as the greatest coin ever

or

We need to make out OWN x11 coin..which is dubious at best an idea.....perhaps call it FUbitmain


(Well, hell, I can always use it as a 'space heater' in the winter or in the summer as a 'doorstop' ..er wait ..I have 2....DAMN IT)

Love it! Where do I sign up? I'd love to shove it up Bitmain.  One thing we can do is attack their new AI program on social media using strategic consumer targets and educate companies thinking of adopting anything that's bitmain related.  In the short term they won't see the effects but as there's a constant bombardment they will feel the effects.  Give them a little bit of dose of the "Saul Alinsky" tactics used in politics.  

Edit:  Heck, I'm starting right now by targeting Riot Blockchain.  They want to acquire 1200 bitcoin machines from Bitmain.  https://www.streetinsider.com/Corporate+News/Riot+Blockchain+%28RIOT%29+to+Acquire+1%2C200+Bitcoin+Mining+Machines+Manufactured+by+Bitmain/13455155.html

Edit: K, started a twitter campaign against bitmain #BOYCOTTBITMAIN #BITMAINLIES, spread the word. 

[blissz]

Thanks blissz  Keep it up. No more scandalous D3. Temp(PCB) 60-67 while Temp(Chip) 73-82. 815W on my wall with 16.4 GH/s 

You're welcome, seems like a good balance between speed and power to me. 

[mcan]

Where is Xhash() function defined ? It has called from driver-btm-DASH.c but i could not see anywhere that the function decribed declared ..

[MoNTE48]

Could you do something similar for L3 +?

[DragosD1]

Hi everyone,

Blissz, any chance to implement AUTOREBOOT for D3?
Like when a board is failing or when it accumulates a certain number of errors?
I'm thinking at "reboot if instant hashrate drops below 80% of average last hour hashrate" or something like that...
After all, D3 reboots everytime a pool is dead, right?

With that implemented we don't have to check it from time to time.
Or it's already implemented into your new firmare?

Thank you and keep the good work!

[swatchez]

Working well. All my D3's are running this firmware

[mcan]

Where is Xhash() function defined ? It has called from driver-btm-DASH.c but i could not see anywhere that the function decribed declared ..

in

Code:

x11/xcoin.c

Code:

void Xhash(void *state, const void *input)
{
	//printf("-----------------Xhash-------------------\n");

    DATA_ALIGN16(unsigned char hashbuf[128]);
    DATA_ALIGN16(size_t hashptr);
    DATA_ALIGN16(sph_u64 hashctA);
    DATA_ALIGN16(sph_u64 hashctB);

    int speedrun[] = {0, 1, 3, 4, 6, 7 };
    int i;
    DATA_ALIGN16(unsigned char hash[128]);
    /* proably not needed */
    memset(hash, 0, 128);
	
// blake1-bmw2-grs3-skein4-jh5-keccak6-luffa7-cubehash8-shavite9-simd10-echo11

#ifdef DUMP_INFO_PERSTEP
	char strInfo[1024];
	unsigned char *pByte;
	uint64_t tmpValue;
	char ret_line[3]={'\r','\n','\0'};
	
	printf("-----------------X11 input-------------------\n");
	pByte=(unsigned char *)input;
	BinToHexStr(strInfo,pByte,128);
	printf("input=%s\n",strInfo);
#endif

	//---blake1---
    DECL_BLK;
    BLK_I;
    BLK_W;
    BLK_C;

#ifdef DUMP_INFO_PERSTEP
	printf("-----------------blake output-------------------\n");
	pByte=(unsigned char *)hash;
	BinToHexStr(strInfo,pByte,128);	// defined unsigned char hash[128]
	printf("hash=%s\n",strInfo);
#endif

So if we return from here ? Are going to get grostl hash as output ?
How is it invoking asics ?

[kristikun]

Heya so i started using your firmware to OC mine D3 so far iv been able to get stable 21gh with few hw on 1 chain , fan on 90% but im not sure about the chip temperature for 24/7 usage  my hottest chain has chip  74 +-  would this be alrigh for nonstop   mining ?

[dndssc]

mcan for you there is a possibility to change the algorithm by modifying the firmware or the only option is to read pics installed on logic boards?

[Maicol792]

Where is Xhash() function defined ? It has called from driver-btm-DASH.c but i could not see anywhere that the function decribed declared ..

in

Code:

x11/xcoin.c

Code:

void Xhash(void *state, const void *input)
{
	//printf("-----------------Xhash-------------------\n");

    DATA_ALIGN16(unsigned char hashbuf[128]);
    DATA_ALIGN16(size_t hashptr);
    DATA_ALIGN16(sph_u64 hashctA);
    DATA_ALIGN16(sph_u64 hashctB);

    int speedrun[] = {0, 1, 3, 4, 6, 7 };
    int i;
    DATA_ALIGN16(unsigned char hash[128]);
    /* proably not needed */
    memset(hash, 0, 128);
	
// blake1-bmw2-grs3-skein4-jh5-keccak6-luffa7-cubehash8-shavite9-simd10-echo11

#ifdef DUMP_INFO_PERSTEP
	char strInfo[1024];
	unsigned char *pByte;
	uint64_t tmpValue;
	char ret_line[3]={'\r','\n','\0'};
	
	printf("-----------------X11 input-------------------\n");
	pByte=(unsigned char *)input;
	BinToHexStr(strInfo,pByte,128);
	printf("input=%s\n",strInfo);
#endif

	//---blake1---
    DECL_BLK;
    BLK_I;
    BLK_W;
    BLK_C;

#ifdef DUMP_INFO_PERSTEP
	printf("-----------------blake output-------------------\n");
	pByte=(unsigned char *)hash;
	BinToHexStr(strInfo,pByte,128);	// defined unsigned char hash[128]
	printf("hash=%s\n",strInfo);
#endif

So if we return from here ? Are going to get grostl hash as output ?
How is it invoking asics ?

i think we need:
1) made this mode in the function, for go i grs3;
2) recomplie the cgminer
3) rebuild the firmware whit this chage
4) Test it

Anyone can help for this step? i think we are on the right track