PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[oklickmanworld]

Please help me! Is this normal???

https://ibb.co/F3RDSQc

here the topics are only about the Phoenix program. Go to another branch. From myself, I will say this: this is a very bad indicator!

[1714465621]

1714465621

[1714465621]

1714465621

[1714465621]

1714465621

[1714465621]

1714465621

[1714465621]

1714465621

[1714465621]

1714465621

[Complivit91]

Friends, what is better to take 2 RX470 4GB for 391$ or 1 1060 6GB for 418$?
For mining Ethereum

Buy only 1060 (6), 4 GB is no longer relevant! In general, and 6 GB will soon not be relevant! Time flies fast!

Got it, thanks, I'll look for more card. Just on whattomine there is a 4 GB partition. I thought it was still relevant! And who will advise what?

[xandry]

Please help me! Is this normal???

Youtube:
HOT VRAM! Is YOUR Nvidia RTX 3080 / 3090 Thermal Throttling? DO THIS!

[PepsiCoin88]

Hi
How much maximum, on Phoenix, can you get with 3070? Now I think to buy at the bottom of the market. Share who has 3070! Thanks

[Galat]

Hi
How much maximum, on Phoenix, can you get with 3070? Now I think to buy at the bottom of the market. Share who has 3070! Thanks

55-60 Mh/s

[eddirush]

Hello Guys,
I get a Rtx 2060 6GB.
Until yesterday 11 GMT my hashrate was 31/32 mh while today I see 28/29 mh with the same overclock parameters (cpu -500 undervolted with curve, mem +1030, power 80%)  
The hashrate was with 5.5c, I switched to 5.6d but the result is pretty the same.
Is anyone see an hasrate drop with Rtx Nvidia Cards
(I knew the issue of the progressive hashrate drops exist for gtx 10x0, is the same for rtx?)
Best Regards

Core -500 Mem 1300-1400 Watts 130 (I’m using HiveOs)

That will give you 44-45Mh.

Ur getting 44-45mh on a RTX2060???
Thats way too high for 2060s, on RTX2070s I get 42-45Mh,

Maybe ur talking about RTX3060 getting 44-45Mh???

[Ursul0]

so here's the conclusion: Polaris on 5.6D (new kernels?) with 20.5+ drivers (20.9.1 ) cannot gracefully regenerate and switch between DAGs, while on 19.12.2 it works fine

@PhoenixMiner
any comments?

[swogerino]

Friends, what is better to take 2 RX470 4GB for 391$ or 1 1060 6GB for 418$?
For mining Ethereum

Buy only 1060 (6), 4 GB is no longer relevant! In general, and 6 GB will soon not be relevant! Time flies fast!

Got it, thanks, I'll look for more card. Just on whattomine there is a 4 GB partition. I thought it was still relevant! And who will advise what?

Yes it is and pretty good.It is for mining Ethereum Classic which their Dag is way lower than 4 GB, after the resolution to lower the Dag size.A mining rig with 8 cards who do 30 mhsh each makes about 20-25 USD daily so it is good and profitable even for 4GB cards for the moment.

[patsyl]

Hello Guys,
I get a Rtx 2060 6GB.
Until yesterday 11 GMT my hashrate was 31/32 mh while today I see 28/29 mh with the same overclock parameters (cpu -500 undervolted with curve, mem +1030, power 80%) 
The hashrate was with 5.5c, I switched to 5.6d but the result is pretty the same.
Is anyone see an hasrate drop with Rtx Nvidia Cards
(I knew the issue of the progressive hashrate drops exist for gtx 10x0, is the same for rtx?)
Best Regards

Core -500 Mem 1300-1400 Watts 130 (I’m using HiveOs)

That will give you 44-45Mh.

Ur getting 44-45mh on a RTX2060???
Thats way too high for 2060s, on RTX2070s I get 42-45Mh,

Maybe ur talking about RTX3060 getting 44-45Mh???

I get a stable 44.5 on my 2060 Super.  I can push it to 47 with about 2% incorrect.

[eddirush]

Hello Guys,
I get a Rtx 2060 6GB.
Until yesterday 11 GMT my hashrate was 31/32 mh while today I see 28/29 mh with the same overclock parameters (cpu -500 undervolted with curve, mem +1030, power 80%) 
The hashrate was with 5.5c, I switched to 5.6d but the result is pretty the same.
Is anyone see an hasrate drop with Rtx Nvidia Cards
(I knew the issue of the progressive hashrate drops exist for gtx 10x0, is the same for rtx?)
Best Regards

Core -500 Mem 1300-1400 Watts 130 (I’m using HiveOs)

That will give you 44-45Mh.

Ur getting 44-45mh on a RTX2060???
Thats way too high for 2060s, on RTX2070s I get 42-45Mh,

Maybe ur talking about RTX3060 getting 44-45Mh???

I get a stable 44.5 on my 2060 Super.  I can push it to 47 with about 2% incorrect.

2060Super would make sense. On Windows and 2070Super Im getting 45mh max, core -270, mem +1200, power 130, anything higher than 1250 1300 mem and it'l start crashing or incorrect shares. I didnt know that 2060Super was similar speed as 2070s

[patsyl]

Hello Guys,
I get a Rtx 2060 6GB.
Until yesterday 11 GMT my hashrate was 31/32 mh while today I see 28/29 mh with the same overclock parameters (cpu -500 undervolted with curve, mem +1030, power 80%) 
The hashrate was with 5.5c, I switched to 5.6d but the result is pretty the same.
Is anyone see an hasrate drop with Rtx Nvidia Cards
(I knew the issue of the progressive hashrate drops exist for gtx 10x0, is the same for rtx?)
Best Regards

Core -500 Mem 1300-1400 Watts 130 (I’m using HiveOs)

That will give you 44-45Mh.

Ur getting 44-45mh on a RTX2060???
Thats way too high for 2060s, on RTX2070s I get 42-45Mh,

Maybe ur talking about RTX3060 getting 44-45Mh???

I get a stable 44.5 on my 2060 Super.  I can push it to 47 with about 2% incorrect.

2060Super would make sense. On Windows and 2070Super Im getting 45mh max, core -270, mem +1200, power 130, anything higher than 1250 1300 mem and it'l start crashing or incorrect shares. I didnt know that 2060Super was similar speed as 2070s

This is what I get. But strangely, I need to set -mclock 8201 to get 8000.

GPU1: 55C 60% 130W
GPU1: cclock 1140 MHz, cvddc 837 mV, mclock 8000 MHz, Tj 67C, p-state P2, pcap power, 342 kH/J
GPUs power: 130.0 W; 342 kH/J

[magicxs]

can i set an absolute gpu core clock  for nvidia cards?

[ajax76]

can someone post some result of their RX 6x00 cards?

about 60 - 64 mh/s

zero hashrate after epoch 412. The developers did not leave any feedback regarding this issue, not to speak about solving the problem. People keep complaining since a few days, but no answer. rx6800 card owners are ignored.

but hey,gminer provides 1-2 mh/sec less but far more stable. cheers

[Smiley!!]

The hash number of my downloaded 5.6d from this site doesn't match that which is displayed on this page.   (Integrity check ?}
Is this a problem ?

[Jameous]

I have issues getting my hash up to full speed!

RX580 with all sorts of drivers, latest being 21.5.1 and PM 5.6d on Win7

It runs at about 9.3MH, (rated at 30-34) and never above that on the ethermine.org pool. (I havent tried other pools yet as I want at least one payout for all the time spent doing this so far.

I tried drivers from 2019, 2020, and even the Blockchain one most recently, but it just kicks out the program, and tells me the GPU is stopped or paused when I try to force an auto speed test.

I have undervolted and overclocked with MSI, (CC 1175/MC 2150/ CV-100) but could not get any BIOS to work right either, so I'm leaving that alone for now too.

It does get shares, with the recent drivers, (but not BC one) but I feel like it could do much better!

 I really dont want to move to win 10, as you may understand.

Any help is appreciated!

BTW, unMinable runs at almost 15MH, which would be ok, but where is the even close to the 30 MH it's supposed to get??

[cnminer]

The tj-temp and mem-temp are not in *API*

[ummasek]

Hi
How much maximum, on Phoenix, can you get with 3070? Now I think to buy at the bottom of the market. Share who has 3070! Thanks

My best 3070 works 62,5@115W. Average 62@120
Clocks 1100/2650 (HiveOS, ACC ON)

[screamopilla]

With the latest PhoenixMiner 5.6d windows zip, downloaded directly from the links provided on the first post in this forum, I'm getting a number of new antivirus/malware alerts.

Previously Phoenixminer 5.5c was just tagged as riskware.bitcoinminer by my antivirus/anti-malware programs.

Now Windows defender is reporting the 5.6d version .exes as 'Win32/Wacapew.C!ml'. Avast reports them as 'FileRepMetagen [PUP] and Malwarebytes is reporting as 'Malware.AI.1867318844'. I've checked the SHA 256 checksum of my zip file versus the originals provided in the first post of this forum and they match, so would really appreciate some urgent feedback on this.

Has anyone had the same or similar issues? It may be that recent virus definition updates have changed how these files are identified, but some clarification (ideally from the phoenix devs) would be appreciated

[Ursul0]

so here's the conclusion: Polaris on 5.6D (new kernels?) with 20.5+ drivers (20.9.1 ) cannot gracefully regenerate and switch between DAGs, while on 19.12.2 it works fine

@PhoenixMiner
any comments?

confirmed. same rigs on 19.12.2 are stable:



new kernels(if its the case) for polaris could require some different optimal gpu config. but the gains are not worth the tinkering
yeah... and a lot of dead shares need to kick it.

[dagere76]

Is there anyway to dual mine on different pools using the -dpool command. For instance if I wanted to mine ETH on Ethermine and then mine zil on a different pool site? Would I use all the -d commands in my bat like -drool -dwallet -dworkers -dpass? Would I also have to include the coin on the zil even though it's ethash? Maybe I am wishful thinking. The site I mine zil at has a he'll of a high payout for ETH. I know I can dual mine there but would rather mine the ethereum at another site...I know gas fees are high and that's why the payout amount is so high.

Thanks for the help