[TEK] TEKcoin Hi-PoS hybrid pos/pow no premine/ipo/ico

[Biomech]

same here win 7 64 bit missig dll, help fix pls

found missing libeay32.dll file on my system , where do i copy and paste to?/

ps. biomech , i only know how to use windows unless you care to teach me how to use other system , gui base hopefully . suspect johan only know windows also

I recently stopped using windows, and have no quarrel with it overall. But Vista and 8.1 are horrible. 7 kicks ass, and so did XP, though it's kind of limp now. I currently use ubuntu, and I like it better, but I'm far from being an expert. Novice would actually probably be overstating it, but I'm learning quick

On topic, paste the .dll's in to the same directory as the Tekcoin-qt.exe file.

[1714123653]

1714123653

[1714123653]

1714123653

[1714123653]

1714123653

[1714123653]

1714123653

[1714123653]

1714123653

[1714123653]

1714123653

[johan11]

same here win 7 64 bit missig dll, help fix pls

found missing libeay32.dll file on my system , where do i copy and paste to?/

ps. biomech , i only know how to use windows unless you care to teach me how to use other system , gui base hopefully . suspect johan only know windows also

I recently stopped using windows, and have no quarrel with it overall. But Vista and 8.1 are horrible. 7 kicks ass, and so did XP, though it's kind of limp now. I currently use ubuntu, and I like it better, but I'm far from being an expert. Novice would actually probably be overstating it, but I'm learning quick

On topic, paste the .dll's in to the same directory as the Tekcoin-qt.exe file.

i have dll on system and i copy to tek dir, and  the same  - TLSv1_1_client_method procedure entry point could not be located in the dynamic link library libeay32.dll found (translate)
 

[Biomech]

same here win 7 64 bit missig dll, help fix pls

found missing libeay32.dll file on my system , where do i copy and paste to?/

ps. biomech , i only know how to use windows unless you care to teach me how to use other system , gui base hopefully . suspect johan only know windows also

I recently stopped using windows, and have no quarrel with it overall. But Vista and 8.1 are horrible. 7 kicks ass, and so did XP, though it's kind of limp now. I currently use ubuntu, and I like it better, but I'm far from being an expert. Novice would actually probably be overstating it, but I'm learning quick

On topic, paste the .dll's in to the same directory as the Tekcoin-qt.exe file.

i have dll on system and i copy to tek dir, and  the same  - TLSv1_1_client_method procedure entry point could not be located in the dynamic link library libeay32.dll found (translate)
 

I think Argakiig has gone to bed like a smart person, but I've passed on the info. It was working on his system and in sync when he uploaded it to Thundertoe. We'll get it sorted

[Dexpla]

Ive downloaded and installed the new wallet on windows 7 32bit and it works. Should it start staking blocks its missed from last week? Its still showing the weight

[Biomech]

Ive downloaded and installed the new wallet on windows 7 32bit and it works. Should it start staking blocks its missed from last week? Its still showing the weight

It will approximately monday. The code is set to change at block 506500, after which staking should resume. Reason is because it IS a hard fork, it gives everyone time to get the new wallet, sort any problems, etc. The new wallet will work just fine for everything but staking prior to the fork, and after that all of your weighted blocks should start staking.

Given the long interval while it was getting fixed, there will probably be quite a few orphans and a lot of competition for stake in the first few days past the fork, so nobody panic if you see higher than usual orphans.

Again, just to make sure everyone knows, no stake weight has been lost in this fix. What it does is reduce the difficulty to stake significantly, and there's a patch going forward to make sure this particular incident can never happen again. Everything should be fully functional as of block 506500.

Those of you with the .dll issues on Windows, it is being addressed. The smart guys have gone to bed, so I'm guessing sometime tomorrow. Please post up any problems here, everybody involved in the fix is paying attention. I don't know if there's a Mac wallet in the works or not, but if anybody out there cares to compile and post one up, I'm sure your fellow Mac users would love you for it. I'm running ubuntu, as I mentioned earlier, and so far the only problem I had was an ID 10 T error on my part. I forgot to delete the test chain and a line in my .conf file that made sure I connected to it. Since it was a deliberate fork and the test node was no longer up, I spent about an hour trying to get a connection before I realized what I'd done But once that was fixed, I caught 5 connections in seconds and the wallet is syncing up. Caveat to anyone doing off chain tests: Back up your blockchain or you'll be syncing for a LONG time. Not as bad as Bitcoin, but not trivial either.

[Biomech]

Ok, here's the fix for those of you with missing dll's. Install this (light version is fine)

http://slproweb.com/products/Win32OpenSSL.html

should solve the problems.


Edit: Credit where it's due. Argakiig, both for the Windows wallet and this fix

[Tupsu]

How do I get the wallet updated?

Step by step instruction please.

Save wallet.dat and remove old wallet  or is it just a new Tekcoin exe file?

[m33]

32bit , my all 64bit now, hope i dont have to go n buy a 32bit sys for the wallet.lol

[Biomech]

How do I get the wallet updated?

Step by step instruction please.

Save wallet.dat and remove old wallet  or is it just a new Tekcoin exe file?

It's just a new Tekcoin-qt.exe or daemon (though you'll have to compile that from source). You're wallet.dat and blockchain data in the .tekcoin (linux) or appdata\roaming\Teckcoin (Windows) folders are not affected. Just run the new client instead of the one you had previous.

[m33]

Ok, here's the fix for those of you with missing dll's. Install this (light version is fine)

http://slproweb.com/products/Win32OpenSSL.html

should solve the problems.


Edit: Credit where it's due. Argakiig, both for the Windows wallet and this fix

so install this 32bit light , into my 64bit sys , will it mess up the other wallets?

installed seems ok , but how do i see the coin age and weight? thanks

[skunk]

hi, after backing up ~/.tekcoin i did the following:

Code:

$ git clone https://github.com/maxxine/TEK
$ cd TEK
$ git checkout TEKv2
$ qmake tekcoin-qt-linux.pro
$ make
[...]
$ ./Tekcoin-qt

but i get "Error loading blkindex.dat" message and exits, the same happens if i remove everything but wallet.dat...
could somebody please tell me what i did wrong?
thank you

[Ense04]

Anyone able to help out this lonely MAC user? 

[Tupsu]

How do I get the wallet updated?

Step by step instruction please.

Save wallet.dat and remove old wallet  or is it just a new Tekcoin exe file?

It's just a new Tekcoin-qt.exe or daemon (though you'll have to compile that from source). You're wallet.dat and blockchain data in the .tekcoin (linux) or appdata\roaming\Teckcoin (Windows) folders are not affected. Just run the new client instead of the one you had previous.

Unfortunately, there is nothing useful. I use on the computer where the money is Win8 .
I copied and  over wrote  all downloaded files  -  appdata\roaming\Teckcoin .

After reboot at startup still starts up the old wallet design - tekcoin version v1.0.1.0-g99999-TEK
 It run Tekcoin.exe


if run Tekcoin-qt.exe, I get an error message WIN7 computer

Code:

The protsedure entry point TLSv_1_1_client_method could not be located on the dynamic link libray SSLEAY32.dll 

[mmfiore]

I started the new wallet and the version number is the same as the old one. How do I know for sure that I have the latest wallet with the fix. v1.1.0.0
Oh, I think I see the difference the new one is 1.1 and the old one is 1.0.1 is this correct?

[ryanb]

Can someone makes it all in a package not showing the dll files like the old wallet just double click it to run it and not worry about missing files?

[Tupsu]

Code:

The procedure entry point SSLv23_client_method could not
be located in the dynamic link libray SSLEAY32.dll

what does it mean ?

[m33]

Code:

The procedure entry point SSLv23_client_method could not
be located in the dynamic link libray SSLEAY32.dll

what does it mean ?

r use 64bit system. if so download the link gave by biomech , install light ver.
http://slproweb.com/products/Win32OpenSSL.html

[ryanb]

Can someone put a link for libeay file?
and where to copy it to?

[thundertoe]

Can someone put a link for libeay file?
and where to copy it to?

i tired it on windows 7 64 this morning and needed this
http://slproweb.com/products/Win32OpenSSL.html  it fixed it

[Tupsu]

Can someone put a link for libeay file?
and where to copy it to?

i tired it on windows this morning and needed this
http://slproweb.com/products/Win32OpenSSL.html  it fixed it

It fixed only my Win8 computer.

Win 7 still same error

Code:

The procedure entry point SSLv23_client_method could 
not be located in the dynamic link libray SSLEAY32.dll.