[TEK] TEKcoin Hi-PoS hybrid pos/pow no premine/ipo/ico

[ofeefee]

I need more nodes, I have been going through my error log and this is what I am seeing;

70.181.40.178      responds with version 60006 so remove this as it is BAD
89.201.186.50      Only times out for me
208.80.166.24      Only times out for me
88.152.187.204     Only times out for me
23.249.161.254     Only refuses my connection
212.21.68.60     Only refuses my connection
67.212.70.84     Only refuses my connection
64.188.164.77     accepts my version request but does not respond at all

More Nodes please

75.90.67.140
188.168.134.55
159.205.243.208
94.220.6.66
69.181.230.66
108.61.10.90

PoW difficulty is close to 500k - someone went nuts    but also nuts are people who are still staking, you have pumped PoS difficulty to 0.003 and later you will complain on low
staking reward, ehh ...

I have 7 connections now, thank you!  I couldn't check the block heights on all of them, and they have not reported their versions to me, will check back in a few.

[1714035375]

1714035375

[1714035375]

1714035375

[subSTRATA]

and if you are in sync, please remove listen=0 and restart client so people can sync with you, should help this go faster.

Switching to addnode instead of connect is also recommended, in general wallet needs just 2 valid nodes to be connected to run properly. All other nodes (outdated ones)
will connect to your wallet or your wallet will connect to them but they will end up banned because of submitting wrong data.

[4x13]

Thanks subSTRATA!! those work aswell, now I have many connections!!

Thank You

[4x13]

OK, so it is now safe to change from;

connect= to addnode=??

[vancefox]

addnode=75.90.67.140
addnode=69.181.230.66
addnode=62.116.254.204
addnode=193.53.89.147
addnode=98.162.248.8
addnode=75.152.82.196
addnode=71.187.236.173

[
{
"addr" : "75.90.67.140:8514",
"services" : "00000001",
"lastsend" : 1409263885,
"lastrecv" : 1409263931,
"conntime" : 1409259325,
"version" : 60007,
"subver" : "/tekcoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 509059,
"banscore" : 0
},
{
"addr" : "69.181.230.66:8514",
"services" : "00000001",
"lastsend" : 1409263884,
"lastrecv" : 1409263930,
"conntime" : 1409259326,
"version" : 60007,
"subver" : "/tekcoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 509059,
"banscore" : 0
},
{
"addr" : "62.116.254.204:8514",
"services" : "00000001",
"lastsend" : 1409263930,
"lastrecv" : 1409263931,
"conntime" : 1409259327,
"version" : 60007,
"subver" : "/tekcoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 509059,
"banscore" : 0
},
{
"addr" : "193.53.89.147:8514",
"services" : "00000001",
"lastsend" : 1409263931,
"lastrecv" : 1409263931,
"conntime" : 1409259977,
"version" : 60007,
"subver" : "/tekcoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 509079,
"banscore" : 0
},
{
"addr" : "98.162.248.8:8514",
"services" : "00000001",
"lastsend" : 1409263931,
"lastrecv" : 1409263931,
"conntime" : 1409260162,
"version" : 60007,
"subver" : "/tekcoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 509083,
"banscore" : 0
},
{
"addr" : "75.152.82.196:8514",
"services" : "00000001",
"lastsend" : 1409263931,
"lastrecv" : 1409263924,
"conntime" : 1409263102,
"version" : 60007,
"subver" : "/tekcoin:2.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 497562,
"banscore" : 0
}
]

[4x13]

addnode=74.196.63.95 - Verified Version: 60007 subversion: 2.0.0
addnode=75.90.67.140 - Verified Version: 60007 subversion: 2.0.0
addnode=188.168.134.55 - Verified Version: 60007 subversion: 2.0.0
addnode=159.205.243.208 - Verified Version: 60007 subversion: 2.0.0
addnode=94.220.6.66 - Verified Version: 60007 subversion: 2.0.0
addnode=69.181.230.66 - Verified Version: 60007 subversion: 2.0.0
addnode=108.61.10.90 - Verified Version: 60007 subversion: 2.0.0
addnode=62.116.254.204 - Verified Version: 60007 subversion: 2.0.0
addnode=193.53.89.147 - Verified Version: 60007 subversion: 2.0.0
addnode=98.162.248.8 - Verified Version: 60007 subversion: 2.0.0
addnode=75.152.82.196 - Verified Version: 60007 subversion: 2.0.0
addnode=71.187.236.173 - Unknown
addnode=94.156.230.246 - Unknown
addnode=75.91.15.240 - Unknown
addnode=98.236.102.116 - Unknown
addnode=108.59.185.202 - Unknown
addnode=64.188.164.77 - Unknown
addnode=208.80.166.24 - Unknown
addnode=88.152.187.204 - Unknown
addnode=23.249.161.254 - Unknown
addnode=212.21.68.60 - Unknown
addnode=67.212.70.84 - Unknown
addnode=23.249.161.254 - Unknown

[defaced]

Defaced and Thundertoe just wanted to say congrats on the hard work and getting everything sorted.

This is why they are called hard forks, not easy forks!  

HAHA! +900000000 brilliant.

[mmfiore]

I think something has gone wrong with the wallet again. It has stopped staking. It is synced up but not staking anymore. I checked my stats page and there are some stats that do not look correct. It is unlocked for staking.

Local hashrate = 0.0khz

Total stake weight = 0

Network stake rate = 0

I still should have loads of coins to stake but everything in coin control is stake weight of 0 except for one block of coins. How do I fix this?

[Biomech]

OK, so it is now safe to change from;

connect= to addnode=??

I think so, if you make sure you're above the forked block on the proper chain first.

[Biomech]

I think something has gone wrong with the wallet again. It has stopped staking. It is synced up but not staking anymore. I checked my stats page and there are some stats that do not look correct. It is unlocked for staking.

Local hashrate = 0.0khz

Total stake weight = 0

Network stake rate = 0

I still should have loads of coins to stake but everything in coin control is stake weight of 0 except for one block of coins. How do I fix this?

sounds like you have some orphans stuck in your system. go into the debug console and type repairwallet.

[HunterS]

I think something has gone wrong with the wallet again. It has stopped staking. It is synced up but not staking anymore. I checked my stats page and there are some stats that do not look correct. It is unlocked for staking.

Local hashrate = 0.0khz

Total stake weight = 0

Network stake rate = 0

I still should have loads of coins to stake but everything in coin control is stake weight of 0 except for one block of coins. How do I fix this?

what system you running.im on windows 8.1 64bit.everything is running fine.I have sent coins to a friend last night with no trouble and most of my coins staked.still have a few to go.im currently on block 509253

[4x13]

here's another question, so I hopped back on a pool, and the difficulty is less at this moment than it was before the fork as less people are mining at this moment, but yet the expected coins per day of mining is significantly lower than before the fork. Why??

[mmfiore]

I am running windows 7 32 bit
I ran repairwallet in console and it returned 


{
"wallet check passed" : true
}


I am synced up to block height 509271

[Biomech]

I am running windows 7 32 bit
I ran repairwallet in console and it returned 


{
"wallet check passed" : true
}


I am synced up to block height 509271

Looks like all is well. I'm at 509317, and judging by the timestamp on this post, that should be about where you are now

[4x13]

Does anyone know of any known working TEK Pools??

[m33]

07:50:55

getinfo


07:50:55

{
"version" : "v2.0.1.0-TEK",
"protocolversion" : 60007,
"walletversion" : 60000,
"balance" : 766.63020900,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 509309,
"moneysupply" : 2049090.13473500,
"connections" : 2,
"proxy" : "",
"ip" : "175.138.128.186",
"difficulty" : 513916.88322323,
"testnet" : false,
"keypoololdest" : 1407850289,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"unlocked_until" : 0,
"errors" : "Info: Minting suspended due to locked wallet."
}


hi guys , im on win7 64bit is the above correct , and do i need to change from connet to addnode

[Tupsu]

Does anyone know of any known working TEK Pools??

http://ppl.port-x.de/mops/public/

[m33]

Does anyone know of any known working TEK Pools??

http://ppl.port-x.de/mops/public/

tompool  http://tompool.org/

[sscott1958]

tompool Tek pool is not working yet.

[m33]

no , i got ffound some blocks therree , how to check?