[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[Kestrel71]

Having an issue with the wallet.  I try to load it up the splash screen loads up and then just hangs.  Looking in task manager the wallet is just doing nothing but using more and more memory and 25% cpu usage.
I done exactly the same as the front page said and am using the latest wallet I assume which is on front page and is 1.0.1.0 version.  I am having no issues with any other wallets just the UTC one.

[1715045713]

1715045713

[1715045713]

1715045713

[1715045713]

1715045713

[1715045713]

1715045713

[1715045713]

1715045713

[CryptoCthulhu]

Having an issue with the wallet.  I try to load it up the splash screen loads up and then just hangs.  Looking in task manager the wallet is just doing nothing but using more and more memory and 25% cpu usage.
I done exactly the same as the front page said and am using the latest wallet I assume which is on front page and is 1.0.1.0 version.  I am having no issues with any other wallets just the UTC one.

Did you try just wait? Opening UTC wallet can take some minutes, this is something which will be fixed soon (or maybe already is in last version, not sure about that).

[Jacques21]

Having an issue with the wallet.  I try to load it up the splash screen loads up and then just hangs.  Looking in task manager the wallet is just doing nothing but using more and more memory and 25% cpu usage.
I done exactly the same as the front page said and am using the latest wallet I assume which is on front page and is 1.0.1.0 version.  I am having no issues with any other wallets just the UTC one.

If you leave it long enough the wallet should open eventually. I have to wait about 10 minutes for it to open.

[pieterjanvh]

Having an issue with the wallet.  I try to load it up the splash screen loads up and then just hangs.  Looking in task manager the wallet is just doing nothing but using more and more memory and 25% cpu usage.
I done exactly the same as the front page said and am using the latest wallet I assume which is on front page and is 1.0.1.0 version.  I am having no issues with any other wallets just the UTC one.

Did you try just wait? Opening UTC wallet can take some minutes, this is something which will be fixed soon (or maybe already is in last version, not sure about that).

Not fixed yet, but indeed it will be soon

[Kestrel71]

Having an issue with the wallet.  I try to load it up the splash screen loads up and then just hangs.  Looking in task manager the wallet is just doing nothing but using more and more memory and 25% cpu usage.
I done exactly the same as the front page said and am using the latest wallet I assume which is on front page and is 1.0.1.0 version.  I am having no issues with any other wallets just the UTC one.

Did you try just wait? Opening UTC wallet can take some minutes, this is something which will be fixed soon (or maybe already is in last version, not sure about that).

If you leave it long enough the wallet should open eventually. I have to wait about 10 minutes for it to open.

Ok guys thanks for the reply's.  Guess I shall just leave it to do it's thing.

[NoWayNL]

Ultraminer Settings for 280x(Sapphire R9 280X 3GB GDDR5 OC VAPOR-X) With 4GB system Ram

Code:

setx GPU_MAX_ALLOC_PERCENT 100 
setx GPU_USE_SYNC_OBJECTS 1 
cgminer.exe --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -o <Pool> -u <Worker> -p <Worker Password> --lookup-gap 3 --thread-concurrency 36864 -g 2 -I 12 -w 256 --gpu-memclock 1500 --gpu-engine 1052 --no-submit-stale

This gave me No HW error and a hashrate between 40-45 khs

When I upgraded my system ram from 4 to 12 GB ram, YacMiner became more usefull

Yacminer Settings for 280x(Sapphire R9 280X 3GB GDDR5 OC VAPOR-X) With 12GB system Ram

Code:

setx GPU_MAX_ALLOC_PERCENT 100 
setx GPU_USE_SYNC_OBJECTS 1
yacminer.exe --scrypt-chacha -o <Pool> -u <Worker> -p <Worker Password> --worksize 128 -g 1 --lookup-gap 3 --buffer-size 2590 -R 8000 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600 --gpu-memclock 1500 --gpu-engine 1025 --no-submit-stale

This gives me a hashrate of 55-60 khs without HW errors,

*** If you get HW error lower -R to 7680


Download yacminer here : https://github.com/Thirtybird/YACMiner/releases


More Ram gives you better Results.. With a upgrade from 4 to 12 GB ram I gained 30-40% more hashpower

If these settings helped you out you can always make a little donation UiDzysjZrScaSwhRTvLuTeQ9Pyv7cresZf

[bumface]

bitcoinwomanmag just published my story about being a woman in crypto and my experiences with ultracoin:

http://bitcoinwoman.com/index.php/articles/187-the-story-of-a-girl-developer-in-cryptoland (it's also on their home page)

great article Dcgirl!

[Water_kel]

Ultraminer Settings for 280x(Sapphire R9 280X 3GB GDDR5 OC VAPOR-X) With 4GB system Ram

Code:

setx GPU_MAX_ALLOC_PERCENT 100 
setx GPU_USE_SYNC_OBJECTS 1 
cgminer.exe --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -o <Pool> -u <Worker> -p <Worker Password> --lookup-gap 3 --thread-concurrency 36864 -g 2 -I 12 -w 256 --gpu-memclock 1500 --gpu-engine 1052 --no-submit-stale

This gave me No HW error and a hashrate between 40-45 khs

When I upgraded my system ram from 4 to 12 GB ram, YacMiner became more usefull

Yacminer Settings for 280x(Sapphire R9 280X 3GB GDDR5 OC VAPOR-X) With 12GB system Ram

Code:

setx GPU_MAX_ALLOC_PERCENT 100 
setx GPU_USE_SYNC_OBJECTS 1
yacminer.exe --scrypt-chacha -o <Pool> -u <Worker> -p <Worker Password> --worksize 128 -g 1 --lookup-gap 3 --buffer-size 2590 -R 8000 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600 --gpu-memclock 1500 --gpu-engine 1025 --no-submit-stale

This gives me a hashrate of 55-60 khs without HW errors,

*** If you get HW error lower -R to 7680


More Ram gives you better Results.. With a upgrade from 4 to 12 GB ram I gained 30-40% more hashpower

If these settings helped you out you can always make a little donation UiDzysjZrScaSwhRTvLuTeQ9Pyv7cresZf

Do you mean ~80kh/s per 280x with 12 GB ram 

[mishax1]

Ultraminer Settings for 280x(Sapphire R9 280X 3GB GDDR5 OC VAPOR-X) With 4GB system Ram

Code:

setx GPU_MAX_ALLOC_PERCENT 100 
setx GPU_USE_SYNC_OBJECTS 1 
cgminer.exe --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -o <Pool> -u <Worker> -p <Worker Password> --lookup-gap 3 --thread-concurrency 36864 -g 2 -I 12 -w 256 --gpu-memclock 1500 --gpu-engine 1052 --no-submit-stale

This gave me No HW error and a hashrate between 40-45 khs

When I upgraded my system ram from 4 to 12 GB ram, YacMiner became more usefull

Yacminer Settings for 280x(Sapphire R9 280X 3GB GDDR5 OC VAPOR-X) With 12GB system Ram

Code:

setx GPU_MAX_ALLOC_PERCENT 100 
setx GPU_USE_SYNC_OBJECTS 1
yacminer.exe --scrypt-chacha -o <Pool> -u <Worker> -p <Worker Password> --worksize 128 -g 1 --lookup-gap 3 --buffer-size 2590 -R 8000 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600 --gpu-memclock 1500 --gpu-engine 1025 --no-submit-stale

This gives me a hashrate of 55-60 khs without HW errors,

*** If you get HW error lower -R to 7680


More Ram gives you better Results.. With a upgrade from 4 to 12 GB ram I gained 30-40% more hashpower

If these settings helped you out you can always make a little donation UiDzysjZrScaSwhRTvLuTeQ9Pyv7cresZf

Where did you download you r YACminer ?

[NoWayNL]

Do you mean ~80kh/s per 280x with 12 GB ram 

Uhhm No? 55/60? Do you get 80 out of them?? I would like to know which settings you use then...

Where did you download you r YACminer ?

I updated my post with a download link

[mishax1]

again, not working.

I can see why everyone leaves this coin...

yacminer-3.5.0-yac2-x86 win8.1 32big 4gb 280X
settings from here - http://www.ultracoin.net/configgen_raw.html   

[NoWayNL]

again, not working.

I can see why everyone leaves this coin...

yacminer-3.5.0-yac2-x86 win8.1 32big 4gb 280X
settings from here - http://www.ultracoin.net/configgen_raw.html  

Code:

setx GPU_MAX_ALLOC_PERCENT 100 
setx GPU_USE_SYNC_OBJECTS 1
yacminer.exe --scrypt-chacha -o <Pool> -u <Worker> -p <Worker Password> --worksize 128 -g 1 --lookup-gap 3 --buffer-size 2590 -R 7680 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600 --gpu-memclock 1500 --gpu-engine 1025 --no-submit-stale

Did you try these settings??

1. Reboot your system
2. Delete all .BIN files from your miner folder
3. Create .bat file with settings i gave above.
4. Wait till your miner starts, and post the results here

[fabietech]

DThe chat is back on cryptsy a good moment to spam some UTC!! already doing it by hand.
Does anyone have some good chatbots for it that we can put on UTC

would be good if chatbox talks about UTC all the time we need a good break

[mishax1]

again, not working.

I can see why everyone leaves this coin...

yacminer-3.5.0-yac2-x86 win8.1 32big 4gb 280X
settings from here - http://www.ultracoin.net/configgen_raw.html  

Code:

setx GPU_MAX_ALLOC_PERCENT 100 
setx GPU_USE_SYNC_OBJECTS 1
yacminer.exe --scrypt-chacha -o <Pool> -u <Worker> -p <Worker Password> --worksize 128 -g 1 --lookup-gap 3 --buffer-size 2590 -R 7680 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600 --gpu-memclock 1500 --gpu-engine 1025 --no-submit-stale

Did you try these settings??

1. Reboot your system
2. Delete all .BIN files from your miner folder
3. Create .bat file with settings i gave above.
4. Wait till your miner starts, and post the results here

enjoy

[NoWayNL]

enjoy

Maybe windows 8 has something to do with it, I'm kinda clueless now..

You can also try lookup-gap 4..

[fredeq]

again, not working.

I can see why everyone leaves this coin...

yacminer-3.5.0-yac2-x86 win8.1 32big 4gb 280X
settings from here - http://www.ultracoin.net/configgen_raw.html  

Code:

setx GPU_MAX_ALLOC_PERCENT 100 
setx GPU_USE_SYNC_OBJECTS 1
yacminer.exe --scrypt-chacha -o <Pool> -u <Worker> -p <Worker Password> --worksize 128 -g 1 --lookup-gap 3 --buffer-size 2590 -R 7680 --temp-cutoff 85 --nfmin 4 --nfmax 30 --starttime 1388361600 --gpu-memclock 1500 --gpu-engine 1025 --no-submit-stale

Did you try these settings??

1. Reboot your system
2. Delete all .BIN files from your miner folder
3. Create .bat file with settings i gave above.
4. Wait till your miner starts, and post the results here

enjoy

Misha you had same problems last nfactor change. As suggested try lookup-gap of 4, or even 5 and let us know. Your error is classic out of ram. I had the same problem as you, but with cgminer transfered from other machine. If you are launching it from command line, delete bins you have in your user folder.

[bullus]

Who is that lonely buyer at mintpal? Only buy no sell.

https://www.mintpal.com/market/UTC/BTC

[Klarisskin]

When is the block reward drop from 50 to 15 planned? The coin supply should be cut ASAP. Too much inflation....

[Vasya]

R9 290X
carefully before starting GPU reboot
download decon , create *bat with the contents

Code:

devconx64 disable "PCI\VEN_1002&DEV_67B0&SUBSYS_04661043&REV_00"
devconx64 enable "PCI\VEN_1002&DEV_67B0&SUBSYS_04661043&REV_00"
timeout /T 5

"PCI\VEN_1002&DEV_67B0&SUBSYS_04661043&REV_00" -  ID device R9 290X

80 Kh/s little HW

Code:

del *.bin
setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNCOBJECTS 1
ultracoinminer -o stratum+tcp://pickaxe.pool.pm:3306 -u vasya.1 -p 1 --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --worksize 128 -g 1 --lookup-gap 3 --thread-concurrency 83968 -I 15  --gpu-engine 1100 --gpu-powertune 20 --no-submit-stale --scan-time 1 --expiry 10 --queue 0 --no-submit-stale 2>logfile.txt

60 Kh/s no HW

Code:

del *.bin
setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNCOBJECTS 1
ultracoinminer -o stratum+tcp://pickaxe.pool.pm:3306 -u vasya.1 -p 1 --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --worksize 128 -g 1 --lookup-gap 3 --thread-concurrency 83968 -I 13  --gpu-engine 1100 --gpu-powertune 20 --no-submit-stale --scan-time 1 --expiry 10 --queue 0 --no-submit-stale 2>logfile.txt

[Doging]

When is the block reward drop from 50 to 15 planned? The coin supply should be cut ASAP. Too much inflation....

I'm still waiting for an official tweet or statement. Stocking up in the meantime because when maxcoin announced they were halving block rewards the price rocketed.