solitude
|
|
February 19, 2014, 01:18:27 AM |
|
What are your HW rate and power supply. All Ant's are not created equal I have some that don't like 400. 375 is always stable and gives 190 GH with usually 0 HW.
HW rate? Where do i find this? Power Supply is Corsair RM850
|
Hardly anyone speaks English on this forum.
|
|
|
Gamer67
Sr. Member
Offline
Activity: 294
Merit: 250
тσ ¢σιи σя иσт тσ ¢σιи?
|
|
February 19, 2014, 01:19:37 AM |
|
post a screen shot of your miner status page
|
"I am not Dorian Nakamoto."
|
|
|
solitude
|
|
February 19, 2014, 01:20:22 AM |
|
What are your HW rate and power supply. All Ant's are not created equal I have some that don't like 400. 375 is always stable and gives 190 GH with usually 0 HW.
I have two Antminer's and both are maxing out at 190 GH with a 400 mhz overclock. Am I just really unlucky?
|
Hardly anyone speaks English on this forum.
|
|
|
smooth
Legendary
Offline
Activity: 2968
Merit: 1198
|
|
February 19, 2014, 01:20:41 AM |
|
I thought 200GH was guaranteed if you overclocked to 400 mhz?
Guaranteed? Overclocking is not guaranteed at all.
|
|
|
|
Gamer67
Sr. Member
Offline
Activity: 294
Merit: 250
тσ ¢σιи σя иσт тσ ¢σιи?
|
|
February 19, 2014, 01:25:50 AM |
|
Each is different. I have some that only like 393, others will do 400 and even 406.
This is with me keeping the HW errors to a max of 0.99% (none hit that but that is my limit) I did take a few to 412 but the hw errors were just over 1%
|
"I am not Dorian Nakamoto."
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
February 19, 2014, 01:27:48 AM |
|
What are your HW rate and power supply. All Ant's are not created equal I have some that don't like 400. 375 is always stable and gives 190 GH with usually 0 HW.
HW rate? Where do i find this? Power Supply is Corsair RM850 I hate that PSU..........only 3 PCIE cables,WTF I got one & it should power 2 Ants,I was going use a cable I had Cablez make to pull power from the ESP,but I'm not,better safe than sorry Picked up one these : http://www.ultraproducts.com/applications/campaigns/campaigntemplate.asp?CampaignID=1111Very happy with it,it has 6 PCIExpress cables,3 6pin & 3 8pin individual cables (1 connector each,no doubles) & its 60 amp,single rail 2 Ants are running about 800 watts,NO OC,so far not a whimper
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan
|
|
|
MrTeal
Legendary
Offline
Activity: 1274
Merit: 1004
|
|
February 19, 2014, 01:34:22 AM Last edit: February 20, 2014, 04:58:18 AM by MrTeal |
|
post a screen shot of your miner status page
Once again, both are overclocked to 400mhz Antminer 2 has 10% HW errors, and Antminer 1 has almost 10%. That's likely the source of your problems.
|
|
|
|
solitude
|
|
February 19, 2014, 01:37:24 AM |
|
Antminer 2 has 10% HW errors, and Antminer 1 has almost 10%. That's likely the source of your problems.
Is that a problem with the power supply or the antminer?
|
Hardly anyone speaks English on this forum.
|
|
|
Gamer67
Sr. Member
Offline
Activity: 294
Merit: 250
тσ ¢σιи σя иσт тσ ¢σιи?
|
|
February 19, 2014, 01:40:22 AM |
|
Drop it down to 393.
393.75 MHz '5F05'
You might even need to go lower.
387.5 MHz '5E85'
|
"I am not Dorian Nakamoto."
|
|
|
bitcoin_miner
|
|
February 19, 2014, 01:45:44 AM |
|
when store open? I'll buy it
|
|
|
|
Gamer67
Sr. Member
Offline
Activity: 294
Merit: 250
тσ ¢σιи σя иσт тσ ¢σιи?
|
|
February 19, 2014, 02:01:43 AM |
|
Drop it down to 393.
393.75 MHz '5F05'
You might even need to go lower.
387.5 MHz '5E85'
Where are you seeing 10% HW errors? What # on that status page tells me this? HW / (HW + DiffA + DiffR + DiffS)= xx *100 Simple rule: Keep the HW lower than accepted shares and you will be ok.
|
"I am not Dorian Nakamoto."
|
|
|
solitude
|
|
February 19, 2014, 02:35:23 AM |
|
Drop it down to 393.
393.75 MHz '5F05'
You might even need to go lower.
387.5 MHz '5E85'
Where are you seeing 10% HW errors? What # on that status page tells me this? HW / (HW + DiffA + DiffR + DiffS)= xx *100 Simple rule: Keep the HW lower than accepted shares and you will be ok. Can I tweak the timeout to increase GH? Thanks for your help btw!
|
Hardly anyone speaks English on this forum.
|
|
|
bitcoin_miner
|
|
February 19, 2014, 02:36:23 AM |
|
For Bitmain, I need info from you. Is 112bit.com authorized distributor for USA by Bitmain Tech Ltd ? caused at this site, wrote "authorized distributor for USA by Bitmain Tech Ltd ". waiting your info
|
|
|
|
Gamer67
Sr. Member
Offline
Activity: 294
Merit: 250
тσ ¢σιи σя иσт тσ ¢σιи?
|
|
February 19, 2014, 02:45:08 AM |
|
Drop it down to 393.
393.75 MHz '5F05'
You might even need to go lower.
387.5 MHz '5E85'
Where are you seeing 10% HW errors? What # on that status page tells me this? HW / (HW + DiffA + DiffR + DiffS)= xx *100 Simple rule: Keep the HW lower than accepted shares and you will be ok. Can I tweak the timeout to increase GH? Thanks for your help btw! I am not sure as I have not done any comparisons myself or read about any others. I just keep mine at 35 or 36 depending on the clock speed.
|
"I am not Dorian Nakamoto."
|
|
|
chopsticks
Member
Offline
Activity: 91
Merit: 10
*bamf!* you've just been eaten by a gr00.
|
|
February 19, 2014, 03:41:27 AM |
|
What is the opinion of the group on the HW errors?
|
This space kept free of spammage, scammage, begging and affiliate linking
|
|
|
solitude
|
|
February 19, 2014, 03:47:54 AM |
|
For those of you that use their Ants wirelessly, I have a question:
if I connect a 5Dbi antenna and put my Ant downstairs one floor beneath the router, directly underneath the router, I should be able to get a good signal right?
|
Hardly anyone speaks English on this forum.
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
February 19, 2014, 03:57:14 AM |
|
Drop it down to 393.
393.75 MHz '5F05'
You might even need to go lower.
387.5 MHz '5E85'
Where are you seeing 10% HW errors? What # on that status page tells me this? HW / (HW + DiffA + DiffR + DiffS)= xx *100 Simple rule: Keep the HW lower than accepted shares and you will be ok. Can I tweak the timeout to increase GH? Thanks for your help btw! your issue is that at 400Mhz the antminer is being overworked - either the power supply is not quite powerful enough to feed it or the PCB power connections just cant handle being so far out of spec. Try 387.5 - it works on ~80% of machines and produces about 194GH. Considering you are losing almost 20GH to hardware errors, it makes sense to tune it down a little
|
|
|
|
solitude
|
|
February 19, 2014, 04:26:19 AM |
|
Is there anyone who successfully connected their Antminer to their wireless network that can help me set this up? I've already changed both of my miners to a different IP address, but the wireless one isn't bringing up the setup page when I put in the address...
|
Hardly anyone speaks English on this forum.
|
|
|
solitude
|
|
February 19, 2014, 04:32:36 AM |
|
Is there anyone who successfully connected their Antminer to their wireless network that can help me set this up? I've already changed both of my miners to a different IP address, but the wireless one isn't bringing up the setup page when I put in the address... How do I get my router to accept the Antminer as a legitmate wireless connection?
|
Hardly anyone speaks English on this forum.
|
|
|
chopsticks
Member
Offline
Activity: 91
Merit: 10
*bamf!* you've just been eaten by a gr00.
|
|
February 19, 2014, 04:57:29 AM |
|
Changed mine from 400 freq down to 393.75 and it has a lot less HW errrors! HW errors less than the amount of Accepted shares now.
|
This space kept free of spammage, scammage, begging and affiliate linking
|
|
|
|