[GPUC] GPU Coin | Mandatory Wallet Update

[SP4RK7]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

You can also try a conf file, which should be in the same directory:

Code:

rpcuser=<your username>
rpcpassword=<your pass>
rpcport=<I picked 6857>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Please note that my conf file is setup in case I want to solo-mine, which is not really a great idea tbh. All you probably need are the addnode lines.

*sighs*

THERE IS NOTHING IN APPDATA.

This is literally the third time I have been given these instructions.  They do not work.  Please if anyone has advice do not repeat this.

Are you sure you have the latest wallet? If I remeber correectly when uzipped only thing there was the wallet-qt and gpucoindeamon.exe

[1714643922]

1714643922

[1714643922]

1714643922

[1714643922]

1714643922

[Ritual]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

You have the old client installed. So go to User/<yourname>/AppData/Roaming/GPUCoin and delete everything EXCEPT your wallet.dat. Then re-run the client.

You can also try a conf file, which should be in the same directory:

Code:

rpcuser=<your username>
rpcpassword=<your pass>
rpcport=<I picked 6857>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Please note that my conf file is setup in case I want to solo-mine, which is not really a great idea tbh. All you probably need are the addnode lines.

*sighs*

THERE IS NOTHING IN APPDATA.

*sighs*

Then that's fucking fine. You're STILL running the old client, you dope.

People are trying to help you here. Less of the *sighs*.

Rit.

I said clearly there was nothing in appdata to remove and your response was to remove the stuff in appdata.

I don't want help from people who just repeat the same things that are not working.  It is just frustrating.  If you cannot read the description of my problem please stop parroting the generic advice.

You're running the old client, you ungrateful ass.

[illiki23]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

You have the old client installed. So go to User/<yourname>/AppData/Roaming/GPUCoin and delete everything EXCEPT your wallet.dat. Then re-run the client.

You can also try a conf file, which should be in the same directory:

Code:

rpcuser=<your username>
rpcpassword=<your pass>
rpcport=<I picked 6857>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Please note that my conf file is setup in case I want to solo-mine, which is not really a great idea tbh. All you probably need are the addnode lines.

*sighs*

THERE IS NOTHING IN APPDATA.

*sighs*

Then that's fucking fine. You're STILL running the old client, you dope.

People are trying to help you here. Less of the *sighs*.

Rit.

I said clearly there was nothing in appdata to remove and your response was to remove the stuff in appdata.

I don't want help from people who just repeat the same things that are not working.  It is just frustrating.  If you cannot read the description of my problem please stop parroting the generic advice.

You're running the old client, you ungrateful ass.

I am running the latest client that was posted. 
I unzipped it to a different directory and am not using the old one.
There is nothing in the appdata file to delete.

[illiki23]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

You can also try a conf file, which should be in the same directory:

Code:

rpcuser=<your username>
rpcpassword=<your pass>
rpcport=<I picked 6857>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Please note that my conf file is setup in case I want to solo-mine, which is not really a great idea tbh. All you probably need are the addnode lines.

*sighs*

THERE IS NOTHING IN APPDATA.

This is literally the third time I have been given these instructions.  They do not work.  Please if anyone has advice do not repeat this.

Are you sure you have the latest wallet? If I remeber correectly when uzipped only thing there was the wallet-qt and gpucoindeamon.exe

Yes.

Those are the two files I have as well.

[SP4RK7]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

You can also try a conf file, which should be in the same directory:

Code:

rpcuser=<your username>
rpcpassword=<your pass>
rpcport=<I picked 6857>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Please note that my conf file is setup in case I want to solo-mine, which is not really a great idea tbh. All you probably need are the addnode lines.

*sighs*

THERE IS NOTHING IN APPDATA.

This is literally the third time I have been given these instructions.  They do not work.  Please if anyone has advice do not repeat this.

Are you sure you have the latest wallet? If I remeber correectly when uzipped only thing there was the wallet-qt and gpucoindeamon.exe

Yes.

Those are the two files I have as well.

I would do a windows search of all files and folders on your pc including hidden files and folders and delete anything related to gpucoin.

Re-download the client and see if that works.

[illiki23]

I would do a windows search of all files and folders on your pc including hidden files and folders and delete anything related to gpucoin.

Re-download the client and see if that works.

Thanks, I will try this.

[vesperwillow]

If the folder isn't there, how about creating it and placing the files there by hand?

[XBATTO]

wow bittrex is major fail. I put an order for:
53000 GPUC @ .00000012    .... That should total 0.00636 btc right?
It lists the total  price as .01 btc. yeah fuck thsi site

Different math I guess..?

sum(BTC) + all of the above sum(BTC)
it adds up

[laterbreh]

http://GPU.leetpools.com

DDOS PROTECTED - NO DOWN TIME
USA - TOP OF THE LINE SERVER
PROP/VARDIFF
0% FEE PROMO

All of our miners have been paid!! Join our pool for no bullshit, and stability.

[bigjme]

Hmm this coin is no profitable for miners in the UK.  Making about 2400 coins a day at current value is £1.26
About the same as the electric bill. Ooh well

[Ritual]

If the folder isn't there, how about creating it and placing the files there by hand?

This is also very good advice. But ofc the asker will spit the dummy out of his pram and reject it. The twat.

[Ritual]

Hmm this coin is no profitable for miners in the UK.  Making about 2400 coins a day at current value is £1.26
About the same as the electric bill. Ooh well

I'd have said that this depends on your hashrate and whether you can cross the breakeven point? You can't make a flat statement like that for all people. It just doesn't make sense.

What's your setup and hashrate?

Rit.

[bigjme]

I'm on about because of the electric price here. I'm hashing at 300khash/s and pulling less then 250w

It's just over break even at that. Horrible electric prices!

[xploreredfusion]

EU P2POOL
http://xploreredfusion.no-ip.biz:9404

24/24h.
Located in Italy (100 Mbps Fiber ) + Backup 4g Connection.
8 GB RAM
8 CORE
1% FEE.
JOIN NOW! ALREADY 100 Mh/s!



http://xploreredfusion.no-ip.biz:9404-u "YOUR ADDRESS" -p x
http://93.58.32.234:9404 -u "YOUR ADDRESS" -p x

• No registration. Point your miner and go!
• Automatic payout every block, increasing over the time
• Our node found a block with just 1 Mh/s!

[illiki23]

I would do a windows search of all files and folders on your pc including hidden files and folders and delete anything related to gpucoin.

Re-download the client and see if that works.

Thanks, I will try this.

I solved the problem with your help.

It is somewhat odd and probably unique to XP.  

I was using the latest client.

I have a folder called "AppData" in my Owner's directory.  It contains the configuration for one coin and was probably generated when I installed that coin.

In the same directory there is a hidden folder called "Application Data".  The only way I found it was by searching for hidden files, in the Owner directory it does not even give the option to make hidden files un-hidden.

I found the config file and deleted.  Thank you very much.

[SP4RK7]

I would do a windows search of all files and folders on your pc including hidden files and folders and delete anything related to gpucoin.

Re-download the client and see if that works.

Thanks, I will try this.

I solved the problem with your help.

It is somewhat odd and probably unique to XP.  

I was using the latest client.

I have a folder called "AppData" in my Owner's directory.  It contains the configuration for one coin and was probably generated when I installed that co

In the same directory there is a hidden folder called "Application Data".  The only way I found it was by searching for hidden files, in the Owner directory it does not even give the option to make hidden files un-hidden.

I found the config file and deleted.  Thank you very much.

Glad you managed to sort it. I would be tempted to delete the whole file. You haven't used the wallet for anything I'm guessing so it won't make any difference just start with a fresh folder wallet etc

[NickPortland]

What kinda price can we expect when GPUC hits a medium Exchange?

0.00008 maybe?

[gsupp]

I would do a windows search of all files and folders on your pc including hidden files and folders and delete anything related to gpucoin.

Re-download the client and see if that works.

Thanks, I will try this.

I solved the problem with your help.

It is somewhat odd and probably unique to XP.  

I was using the latest client.

I have a folder called "AppData" in my Owner's directory.  It contains the configuration for one coin and was probably generated when I installed that coin.

In the same directory there is a hidden folder called "Application Data".  The only way I found it was by searching for hidden files, in the Owner directory it does not even give the option to make hidden files un-hidden.

I found the config file and deleted.  Thank you very much.

Yeah, Windows is really bad about:

1) hiding folders and files from you it thinks you should never touch
2) putting things in different locations and calling it something different depending on the version ("application data" vs "appdata" or "Documents and Settings" vs "Users")

[vesperwillow]

All you have to do is unselect 'hide system folders' from options ...

[laterbreh]

start > type %AppData%