[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[rednoW]

dcr and lbc    ADD pool
Please

really better to add ETN - xmr pool is good at MPH, so will hope ETN will be good too. And with possibility to mine directly to exchange or auto-convert ...

[Christopher761]

New to MPH:

I am running what appears to be a very long benchmark.

Does the benchmark look for the best on a per card basis?  Or is it on a per machine basis (where each machine has multiple cards)?

The reason I ask, is I have 3x 1060GTX.   One is 6gb samsung and 2x are 3gb hynix.  I also have 1x1050 and a 1x950 and 2x570s and 4x 1070.  (the 1070s are 1x of one, 1x of another, and 2x of a third type)  I am just wondering how to arrange the machines the cards in machines.  Or does it matter?

Based upon the benchmark progress, it is creating some interesting numbers.

[Myth888]

dcr and lbc    ADD pool
Please

really better to add ETN - xmr pool is good at MPH, so will hope ETN will be good too. And with possibility to mine directly to exchange or auto-convert ...

Probable w ETN is no supported exchange in MPH atm. Others might complain why it's not auto trading. This pool is mostly equihash and ethos atm. So adding Dcr and library would compliment ethos.

Pool needs a lot of catching up in the cryptonight algo. I mine ETN and I sure would like to mine it in MPH. But if it was added probably needs to be secluded from profit switching while the exchange is not solved yet. And I sure would like to see other cryptonight to like sumo or other cryptonight algo in the future as well.

We just have to be patient for now.

[Myth888]

New to MPH:

I am running what appears to be a very long benchmark.

Does the benchmark look for the best on a per card basis?  Or is it on a per machine basis (where each machine has multiple cards)?

The reason I ask, is I have 3x 1060GTX.   One is 6gb samsung and 2x are 3gb hynix.  I also have 1x1050 and a 1x950 and 2x570s and 4x 1070.  (the 1070s are 1x of one, 1x of another, and 2x of a third type)  I am just wondering how to arrange the machines the cards in machines.  Or does it matter?

Based upon the benchmark progress, it is creating some interesting numbers.

Best if you assemble Nvidia and amd separately if you can. Less drivers to install. And some machines need to have a monitor or dummy plug plugged in so you can adjust values in afterburner on at least 1 per brand. So u need to hook up 2monitors or 2dummy plugs.

[miningpoolhub]

Everyone is talking about ETN right now because of the profit. It's above $2 per card atm sometimes nearly $3. Big profits for low electricity. Only problem is all pools are experiencing problems. I dedicated my hotter running cards to ETN. The rest are dual mining here. Only exchange is cryptopia.

Wallet is still command line.

OK. Thank you for info.

Your welcome. But I believe you will eventually improve everything as time permits it. You still have a lot more other requests that are pending. So just put it at the bottom of the pile. Hahaha

Thank you for your kindness. I'll do my best 

I have to say MPH is the only honest and reliable pool I have found in the ALT Coin space. This guy sometimes replies slow to inquiries, but he does get back to you. Also, as far as I can tell he isn't a scammer like the other pools tend to be. (ahem, Zpool, Prohashing, Suprnova).

Thank you. I feel great!
Yah!!

Everyone is talking about ETN right now because of the profit. It's above $2 per card atm sometimes nearly $3. Big profits for low electricity. Only problem is all pools are experiencing problems. I dedicated my hotter running cards to ETN. The rest are dual mining here. Only exchange is cryptopia.

Wallet is still command line.

I think the command line wallet is what is holding back more people getting involved in ETN (not to mention the pool problems) - less competition, more profit
There is a user generated GUI wallet which is just a modification of the Monero GUI wallet, I've not tried it as I'm happy using the command line wallet and I can wait until an official wallet is released.
The user GUI wallet can be found here.. https://github.com/tperalta82/electroneum-core/releases

Usually pool doesn't use gui wallet at all but thanks for the info.

dcr and lbc    ADD pool
Please

Yeah I'll do it. Sorry for late.
I can't concentrate on new coin addition only because there's many things to care daily. I hope you understand this situation.

Weird, I am getting up to 35% invalid shares. What can I improve so to not submit shares late.

I didn't get that point with GPU overclock well.

Maybe you are mining zcoin with ccminer? You are not alone.
Try djm34's latest ccminer release. That is the best miner out there.

sgminer miners don't have such problem but ccminer makes so many stale (late) shares. I don't know why.

[dandyqb]

@miningpoolhub

It is possible that you reflect or display in Dashboard the Hashrate of our rigs, just like in Nanopool (Last Reported Hashrate), its very helpful and useful in my/our part, just like in my case, my rigs total hashrate is 180 Mh/s in ETH, and it reflects in Nanopool dashboard (Last Reported Hashrate), once i see it that the hashrate goes down or display different figure i know that there's something wrong with my rig, that is the time i will restart my rig. Thank you...

[fonyo]

1) live stat will harm multipoolminer because it will switch algo continually if there's no internal threshold
2) multipoolminer already made big ddos like traffic to server before and made things unresponsive.
Imagine 100000 miner rigs are all polling web server continually.
It's not running per one user, per rigs.
Polling massive amounts of rigs is far from ideal at all.
We should make some socket connecttion to get realtime api data if you really need realtime data.


I added "last_block" field at getminingandprofitsstatistics api as you requested.
It's unixtimestamp number.

1. There is an internal treshhold already in place, MPM can evaluate real-time data it receives and needs the same to do so accurately and timely.
2. Even though you have a valid point here, high traffic on API is completely normal and just something all operators need to accept. The increase in traffic is parallel with your earnings. MPM does not just poll the API for no reason, these are all users mining on your pool. Improvements are definitely needed. I am not saying it should be real-time, updating every 1-3 minutes is still fine, however having to rely on 30-minute-old data is just redonkulous in a fast-paced crypto world.

[IronMan_74]

Is there an issue with Maxcoin getting exchanged to other coins? Or is there a certain amount you need before it will get exchanged to another coin? I've had ~11 Maxcoin sitting ready for auto exchange for over a month now and it hasn't gone away. I did turn off mining that algo after I saw what had been mined sitting there for several days, so i haven't added anymore to it for awhile now. thanks!

[Bluecheese]

Does MPH support stratum diff manual changes meaning in the password does it support the “d=xx”?

[miningpoolhub]

@miningpoolhub

It is possible that you reflect or display in Dashboard the Hashrate of our rigs, just like in Nanopool (Last Reported Hashrate), its very helpful and useful in my/our part, just like in my case, my rigs total hashrate is 180 Mh/s in ETH, and it reflects in Nanopool dashboard (Last Reported Hashrate), once i see it that the hashrate goes down or display different figure i know that there's something wrong with my rig, that is the time i will restart my rig. Thank you...

Isn't it only supported from ethash coins? Because other stratum doesn't have hashrate protocol at all.
I'll check it anyway.

1. There is an internal treshhold already in place, MPM can evaluate real-time data it receives and needs the same to do so accurately and timely.
2. Even though you have a valid point here, high traffic on API is completely normal and just something all operators need to accept. The increase in traffic is parallel with your earnings. MPM does not just poll the API for no reason, these are all users mining on your pool. Improvements are definitely needed. I am not saying it should be real-time, updating every 1-3 minutes is still fine, however having to rely on 30-minute-old data is just redonkulous in a fast-paced crypto world.

1. I didn't know that. Seems good.
2. I don't mean that high traffic is expensive.
It's similar to ddos and very hard to sustain that load. I would have to change several pool architecture to load balance that query.
30 min is configured setting from cloudflare. I actually wanted 3~5 minute caching.
I'll find way to get things more flexible.

Is there an issue with Maxcoin getting exchanged to other coins? Or is there a certain amount you need before it will get exchanged to another coin? I've had ~11 Maxcoin sitting ready for auto exchange for over a month now and it hasn't gone away. I did turn off mining that algo after I saw what had been mined sitting there for several days, so i haven't added anymore to it for awhile now. thanks!

What coin did you set for auto exchange target coin?
Bitcoin will be safe and faster. Not sure how long it will take for other coins.

Does MPH support stratum diff manual changes meaning in the password does it support the “d=xx”?

"d=XX" is supported but it's just starting difficulty. Miner can give hint to server to start from certain difficulty and it will change as time passes.

Some pools support "sd=XX" which is static difficulty setting you are looking for.
Only coins that have short block time like Myriadcoin, Digibytecoin supports them.
The reason why pool doesn't allow "sd=XX" for all coins is that this feature may be used for low difficulty attacks.

I don't recommend to static difficulty at all in most cases, because vardiff runs quite well.

[sedde]

Mister hub, ETN is making double the profit of dual mining eth+x by itself, if you havent looked into that pool adding yet please do.

Thank you for being so active and bearing with us.

Best regards.

[Fie2rglrwa]

Re: I can't connect to MiningPoolHub using XMR-STAK.  Please help.

I have tried everyway I can think of to get my xmr-stak-nvidia to connect.

The same config file works with Nanopool but not with Mining Pool Hub.  What am I doing wrong?

I really want to connect to MiningPoolHub

But, everytime there is an authentication error.

I use XMR-STAK-NVIDIA with this config (where xxx is my pool username)

config changes are:

"pool_address" : "us-east.cryptonight-hub.miningpoolhub.com:12024",
"wallet_address" : "xxx.worker1",
"pool_password" : "x",

THE RESULT IS AN ERROR:

[2017-12-05 19:38:44] : Connecting to pool us-east.cryptonight-hub.miningpoolhub.com:12024 ...
[2017-12-05 19:38:45] : Connected. Logging in...
[2017-12-05 19:38:47] : SOCKET ERROR - invalid username used for login
[2017-12-05 19:38:47] : SOCKET ERROR - RECEIVE error: A blocking operation was interrupted by a call to WSACancelBlockingCall.
[2017-12-05 19:38:47] : Pool connection lost. Waiting 10 s before retry (attempt 1).

[aaronsace]

Re: I can't connect to MiningPoolHub using XMR-STAK.  Please help.

I have tried everyway I can think of to get my xmr-stak-nvidia to connect.

The same config file works with Nanopool but not with Mining Pool Hub.  What am I doing wrong?

I really want to connect to MiningPoolHub

But, everytime there is an authentication error.

I use XMR-STAK-NVIDIA with this config (where xxx is my pool username)

config changes are:

"pool_address" : "us-east.cryptonight-hub.miningpoolhub.com:12024",
"wallet_address" : "xxx.worker1",
"pool_password" : "x",

THE RESULT IS AN ERROR:

[2017-12-05 19:38:44] : Connecting to pool us-east.cryptonight-hub.miningpoolhub.com:12024 ...
[2017-12-05 19:38:45] : Connected. Logging in...
[2017-12-05 19:38:47] : SOCKET ERROR - invalid username used for login
[2017-12-05 19:38:47] : SOCKET ERROR - RECEIVE error: A blocking operation was interrupted by a call to WSACancelBlockingCall.
[2017-12-05 19:38:47] : Pool connection lost. Waiting 10 s before retry (attempt 1).

The port is 17024.

[IronMan_74]

Is there an issue with Maxcoin getting exchanged to other coins? Or is there a certain amount you need before it will get exchanged to another coin? I've had ~11 Maxcoin sitting ready for auto exchange for over a month now and it hasn't gone away. I did turn off mining that algo after I saw what had been mined sitting there for several days, so i haven't added anymore to it for awhile now. thanks!

What coin did you set for auto exchange target coin?
Bitcoin will be safe and faster. Not sure how long it will take for other coins.

Thanks for the reply, i have my auto exchange set to VertCoin. I see VertCoin isn't on YoBit and thats the only place MaxCoin is..... I assume I would need to switch to a different coin, like Ethereum, to get the MaxCoin changed to and then get it changed to VertCoin?

EDIT: Or it looks like maybe DASH instead since its on all 3 exchanges?

[miningpoolhub]

Mister hub, ETN is making double the profit of dual mining eth+x by itself, if you havent looked into that pool adding yet please do.

Thank you for being so active and bearing with us.

Best regards.

Yeah I was so busy with siacoin's hardfork mining and ethereum network issue lately.
I'll work on new coin addition as soon as all other stuffs are solved.

Is there an issue with Maxcoin getting exchanged to other coins? Or is there a certain amount you need before it will get exchanged to another coin? I've had ~11 Maxcoin sitting ready for auto exchange for over a month now and it hasn't gone away. I did turn off mining that algo after I saw what had been mined sitting there for several days, so i haven't added anymore to it for awhile now. thanks!

What coin did you set for auto exchange target coin?
Bitcoin will be safe and faster. Not sure how long it will take for other coins.

Thanks for the reply, i have my auto exchange set to VertCoin. I see VertCoin isn't on YoBit and thats the only place MaxCoin is..... I assume I would need to switch to a different coin, like Ethereum, to get the MaxCoin changed to and then get it changed to VertCoin?

EDIT: Or it looks like maybe DASH instead since its on all 3 exchanges?

You're right.
But btc exchange will be faster if there's so little people trying to exchange into dash through Yobit.

[falsealarm_bf1]

My hashrate for Monacoin on the dashboard and also on the workers page is being reported about 40% less. I understand this is a 5 minute running average but with no rejections, this is quite a discrepancy. What could this be due to?

[falsealarm_bf1]

If I am mining MONA, and my autoexchange coin is ZEN both of which are only on Bittrex, does MPH automatically exchange as MONA --> BTC --> ZEN, or do I have to intervene some way?

[aaronsace]

If I am mining MONA, and my autoexchange coin is ZEN both of which are only on Bittrex, does MPH automatically exchange as MONA --> BTC --> ZEN, or do I have to intervene some way?

Just wait, I believe MiningPoolHub said that everything is exchanged to BTC then to the alternative currency at the exchanges.

[aaronsace]

My hashrate for Monacoin on the dashboard and also on the workers page is being reported about 40% less. I understand this is a 5 minute running average but with no rejections, this is quite a discrepancy. What could this be due to?

Check for invalid shares and check the graphs over 24 hours.

[carlo_0000]

i notice in multipoolminer

-poolname miningpoolhub,miningpoolhubcoins

what is miningpoolhubcoins ?