[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[i3luefire]

Maybe the operator should consider removing the hashrate meter from the website? Since it is inaccurate, why put it there?

That's how all pools work, it says at the bottom how it's being estimated. You submit shares to the pool and then the pool gives an indication of the speed based on what shares it is receiving over a period of time.

But I get paid off of what the pool thinks my hash rate is. So it is important that the pool thinks I have the hash rate that I have.
No?

[Temporel]

https://imgur.com/a/eMKA4
what is the reason the hash rates don't add up?

The pool doesn't know what your hash rate is.

so it shows random numbers instead ? Why the numbers are fine with other pools then ?

[Temporel]

Maybe the operator should consider removing the hashrate meter from the website? Since it is inaccurate, why put it there?

That's how all pools work, it says at the bottom how it's being estimated. You submit shares to the pool and then the pool gives an indication of the speed based on what shares it is receiving over a period of time.

But I get paid off of what the pool thinks my hash rate is. So it is important that the pool thinks I have the hash rate that I have.
No?

not think, but the works your GPUs did

[4ward]

Я чepтoв идиoт

good idea, lets all use our native language ! NOT

Some russians are so pathetic, like their dictator...

pathetic loser... I blame your parents.

fcking idiot, I blame your parents.

I blame your parents

is this the famous cryptodouche club ? Filled with clueless wannabe ? Just asking...

that was both a clueless and stupid comment, well done !

for some reason a large part of your posts is filled with hate for everyone...
I pity your parents

[onionpealer]

I have destroyed my iphone and can´t access  the google auth app to disable the OTP. what can I do?

can´t Change anything without OTP -.- shit

I disabled OTP immediately after seeing this 

This is why I also have 2FA disabled on coin exchanges. A friend, just a couple of days ago, broke his phone and can no longer access the coins held on an exchange...I did warn him.

[Temporel]

Я чepтoв идиoт

good idea, lets all use our native language ! NOT

Some russians are so pathetic, like their dictator...

pathetic loser... I blame your parents.

fcking idiot, I blame your parents.

I blame your parents

is this the famous cryptodouche club ? Filled with clueless wannabe ? Just asking...

that was both a clueless and stupid comment, well done !

for some reason a large part of your posts is filled with hate for everyone...
I pity your parents

I have a stalker

The reason is simple, I mostly reply to losers like you who ruin this board

Free tip: Get a life asap (I blame your parents btw).

[4ward]

I have destroyed my iphone and can´t access  the google auth app to disable the OTP. what can I do?

can´t Change anything without OTP -.- shit

I disabled OTP immediately after seeing this 

This is why I also have 2FA disabled on coin exchanges. A friend, just a couple of days ago, broke his phone and can no longer access the coins held on an exchange...I did warn him.

use Authy instead on Google authenticator.

It attaches to your phone number and you can always recover your MFAs

[yurasic park]

...
...
...
he is 100% right btw, you really should mine something else with you 1070. If you had 1080Tis I would almost agree with you

Zcoin profits are decent on a 1070. What alternatives are there?, or do you mean obscure things like goByte?

As they say a lot for this there are reasons. That ping is to blame, then the miner himself is some kind of garbage. But the fact that the hash of the network itself plus a minus does not particularly fluctuate, but the payroll sharply goes down. And in conclusion I will say. Almost all blocks on zcoin catch this pool. And they rub all nonsense here. The conclusion suggests only one.

[paulpoco]

18182904   2017-12-20 14:54:29 (UTC)   Credit_AE   Orphaned         1468956   0.00008416
Monero

Does Orphan mean it tries later.

[JQE]

So again, i made it for myself. I am seeing if there would be any value if me making it configurable and sharing with others. Software would be free, and open source. I would accept donations though.

Sounds like a useful enhancement above basic sh/BAT files.  Put it up at Github.

It also makes sure i finish each pplns cycle before switching as the hub itself is managing my coin switching.

This is likely to be the most useful feature, because MPH already takes care of it for you on 17xxx and 12xxxx.  So if you can use that on the 20xxxx ports or other pools, it's very useful.

First off it wouldn't work with other pools. Simplifying to one pool was more the goal. Using the built in system (12xxx Ports) to do the switching.
My app was more about reporting and information gathering than control the switching.

However as i dug deeper down the rabit whole it seems unlikely a public version is going to happen.
It ended up being 3 parts.
first part: Controls the mining software and has an api conversion for the miner apis. AKA all miners report the same way so i can use a universal get for miner statistics.
second part: a caching proxy that provides miningpoolhub data in a easy to digest format and limits the call to the hub to avoid overload.
third part: The clean nice looking front end that display everything i need to see.

So with the resulting complexity i don't think i will go through the effort of making it something i can share. If someone is Serious about having it setup for themselves they can let me know and we can talk privately. It is nice to be able to see at a glance, what coin and algo i am running, as well as projected profits based on MPH Pools and off of last 24 hours profit.

[4ward]

So again, i made it for myself. I am seeing if there would be any value if me making it configurable and sharing with others. Software would be free, and open source. I would accept donations though.

Sounds like a useful enhancement above basic sh/BAT files.  Put it up at Github.

It also makes sure i finish each pplns cycle before switching as the hub itself is managing my coin switching.

This is likely to be the most useful feature, because MPH already takes care of it for you on 17xxx and 12xxxx.  So if you can use that on the 20xxxx ports or other pools, it's very useful.

First off it wouldn't work with other pools. Simplifying to one pool was more the goal. Using the built in system (12xxx Ports) to do the switching.
My app was more about reporting and information gathering than control the switching.

However as i dug deeper down the rabit whole it seems unlikely a public version is going to happen.
It ended up being 3 parts.
first part: Controls the mining software and has an api conversion for the miner apis. AKA all miners report the same way so i can use a universal get for miner statistics.
second part: a caching proxy that provides miningpoolhub data in a easy to digest format and limits the call to the hub to avoid overload.
third part: The clean nice looking front end that display everything i need to see.

So with the resulting complexity i don't think i will go through the effort of making it something i can share. If someone is Serious about having it setup for themselves they can let me know and we can talk privately. It is nice to be able to see at a glance, what coin and algo i am running, as well as projected profits based on MPH Pools and off of last 24 hours profit.

that sounds like megaminer, multipoolminer or awesomeminer
https://bitcointalk.org/index.php?topic=2059039.0

[JQE]

that sounds like megaminer, multipoolminer or awesomeminer
https://bitcointalk.org/index.php?topic=2059039.0

i think i am going to let this idea die. People don't seem to follow it.

It is NOT like the other ones. As the other ones do the switching for you, which loses shares. In the end i wanted to use the hub feature but be able to see what was going on.

Either way i have my own running, and it works for me.. so i will just leave it there.

[Nexworks]

Can BMiner (https://bitcointalk.org/index.php?topic=2519271.120) get added to multipoolminer please? Even with the dev fee turned off its still pulling 477 sol's versus 460 I get with DSTM

[Christopher761]

Does zpool have problems transferring money to a bitpay bitcoin address?  Mine seems to be barfing, and the transaction has been pending for 24 hours.  Bitpay wallet seems to know the money is coming.  But it says, it was sent with minimal transaction fees, so the transaction might fail.

Also is there a way to increase the minimum payout on zpool?  It sent me .0023 on a Tuesday.    With a transaction fee of .0003....  (I just started that new address that morning, and was not expecting a payment for 6 more days.)

On MPH, I just set the automatic transfer off.  And then when it accumulates $80+ bucks, then I send it.  That way I am limiting the transfer fees compared to the transfer amounts.  I have not been able to see anyway to do that on zpool.

Not really an MPM problem, but given the way that MPM switches pools, I am hoping someone knows how to address these.

[schnub69]

Is it possible to change difficulty on mph for electroneum?

the lowest i get with the cpu miners is 40000 which is a bit to high for 50-100 hash

[Miner2525]

I have destroyed my iphone and can´t access  the google auth app to disable the OTP. what can I do?

can´t Change anything without OTP -.- shit

Use Authy next time.  It backsup all your OTPs to cloud and syncs to all your other devices.

[i3luefire]

Does zpool have problems transferring money to a bitpay bitcoin address?  Mine seems to be barfing, and the transaction has been pending for 24 hours.  Bitpay wallet seems to know the money is coming.  But it says, it was sent with minimal transaction fees, so the transaction might fail.

Also is there a way to increase the minimum payout on zpool?  It sent me .0023 on a Tuesday.    With a transaction fee of .0003....  (I just started that new address that morning, and was not expecting a payment for 6 more days.)

On MPH, I just set the automatic transfer off.  And then when it accumulates $80+ bucks, then I send it.  That way I am limiting the transfer fees compared to the transfer amounts.  I have not been able to see anyway to do that on zpool.

Not really an MPM problem, but given the way that MPM switches pools, I am hoping someone knows how to address these.

Why is that a question on this thread? This thread is for Mining Pool Hub.

[CryptAtomeTrader44]

Is Vivo will be added on MPH for future ?

ETN wasn't interesting for me. More interreted in VIvo.

[dgrilli]

Please, consider to open a Verge Lyra2Rev2 pool.
Thank you.

[nitrobg]

Can you add a last 6/12/24h average profit in the API? It would be very useful for multiminers.