[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[jackbox]

Hello. I've set up an account at MPH, and I spent all last night mining Verge coin, but my dashboard at MPH showed no activity, and no credits were attributed to my MPH account.


Here's what I have in my ccminer bat file:

ccminer-x64.exe -a x17 -o stratum+tcp://hub.miningpoolhub.com:20523 -u Delicieuxz.1 -p x


I have also tried typing the bat file this way:


ccminer-x64.exe -a x17 -o stratum+tcp://hub.miningpoolhub.com:20523 -u Delicieuxz.1:x



And here are screenshots of my mining, and of the MPH dashboard.

https://i.imgur.com/0fjcoAL.jpg

https://i.imgur.com/iZzmQEF.jpg



Does anyone know what's wrong?

This is a scrypt pool, not x17. Change algo to "-a scrypt".  Your intensity of 19 might be too high also. After changing algo type and still no shares try lowering the instensity by "-i 18" to lower the intensity. If that doesn't work after a while try 17. You are not getting any shares. I believe due to too high an intensity.

he definitely does not want to do that with an nvidia card.. he needs to go to a pool that has x17.. like zpool or hashrefinery.

I tried the scrypt pool with my Nvidia rigs and the results were abysmal. Many other coins much more profitable to mine with Nvidia.

[Delicieuxz 2]

Hey everyone, thanks for all your help!

I tried "-a scrypt" at MPH, and it still wasn't accepting my shares. So, I don't know if I had something else wrong, too. I also checked out zpool, and it seems that zpool only pays out in BTC, while I'm looking to mine and directly collect Verge.

However, I then looked around for more x17 mining pools, and I started mining with this relatively new Verge coin pool that's mentioned in this video: https://youtu.be/jKAoZnZIsIE

And the miner config details for it are listed in a comment by the video author.

I tried that, and it's accepting my shares. So, all good, now!

I tried the scrypt pool with my Nvidia rigs and the results were abysmal. Many other coins much more profitable to mine with Nvidia.

Which coins do you find are good for Nvidia GPUs?

[jackbox]

Hey everyone, thanks for all your help!

I tried "-a scrypt" at MPH, and it still wasn't accepting my shares. So, I don't know if I had something else wrong, too. I also checked out zpool, and it seems that zpool only pays out in BTC, while I'm looking to mine and directly collect Verge.

However, I then looked around for more x17 mining pools, and I started mining with this relatively new Verge coin pool that's mentioned in this video: https://youtu.be/jKAoZnZIsIE

And the miner config details for it are listed in a comment by the video author.

I tried that, and it's accepting my shares. So, all good, now!

I tried the scrypt pool with my Nvidia rigs and the results were abysmal. Many other coins much more profitable to mine with Nvidia.

Which coins do you find are good for Nvidia GPUs?

I've had success with most of them except scrypt.

[MegoBasha]

Use LTC ETH or even BCH for frequent withdraws .. then send to an exchange when you have saved up a bunch. BTC isn't worth it (even at .0005) unless you keep your coins on the site for a looooong time.

takes so long time and make double fees in the site exchange and the withdrawal fees

plus
all I have with BTC was 0.0025 and I want to move it to the blockcahin to have the fork's new coins
but I couldn't do that because they raised it to 0.0025 then when I got the 0.0025 They raised it to 0.0028 then the pool announced that it is reduced
I was very happy with that announcement
so I tried to make the withdrew  but the system refused to do so
thanks
Mego

[ying_style]

Hi Guys! Sorry if this was already asked before is there a link of upcoming coins to MPH?


If Not MPH would it be possible to add a link the upcoming coins in the first page?


Also would like to request Ubiq to be added to the Mining pools.

[Onbusy]

Anyone having any issues with the Scrypt pool not switching coins?  The website is updating most profitable coin, but not the actual pool.  In the last 3 hours I've only mined Gulden (NLG), but since I've been checking it has never been the most profitable coin according to Multipool.  I might manually switch to just mining Verge ...

[jackbox]

Anyone having any issues with the Scrypt pool not switching coins?  The website is updating most profitable coin, but not the actual pool.  In the last 3 hours I've only mined Gulden (NLG), but since I've been checking it has never been the most profitable coin according to Multipool.  I might manually switch to just mining Verge ...

You sure you are using the port for the switching pool?

[Onbusy]

I made a mistake.  Not a problem with Mining Pool Hub, was for Multipool.  Did a search and got to the wrong pool's thread.

I run my GPUs to MPH, but I have some old ASIC scrypt miners that I set to Multipool because I can't seem to get the difficulty low enough on MPH for them (tried d=640 and still get like 16k difficulty)

[david987]

There was a lyra2z discussion quite a few pages back, wonder if anyone has been able to match miner vs MPH hashrates?
Getting 10MH average on MPH vs 12MH on ccminer and profit reflects this (20% less revenue than expected)
Heard people had better luck with other pools? I'm using the lyra2z optimized ccminer by djm34 with high intensity

[adaseb]

I am trying to login and get

Unable to login. Please check your email and password.

(Account may be locked if you try login several times with wrong password. Please check your email for instructions to unlock if you think it's locked.)


I already PM the OP but got no reply. Any other way of getting the account unlocked?

[malthrax]

I am trying to login and get

Unable to login. Please check your email and password.

(Account may be locked if you try login several times with wrong password. Please check your email for instructions to unlock if you think it's locked.)


I already PM the OP but got no reply. Any other way of getting the account unlocked?

 

Bottom of the main page tells you how to contact the pool operator...

CONTACT
Contact miningpoolhub for private account verification, server error reports only. General questions should be asked on community and forum.
Twitter @MiningPoolHub
Email contact@miningpoolhub.com
Skype contact@miningpoolhub.com

[MiCoSa]

Is there any chance you add a myriad-groestl vergecoin pool?

[d0n4ald]

Which coins on multipoolminer have the largest block reward and least difficult?  I want to accumulate the max quantity of coins that i can gpu mine.

[Onbusy]

So I'm trying to run the scrypt multipool on MPH again, and still can't figure out how to set the initial difficulty lower.  My batch file is as follows:

cgminer.exe --scrypt -o stratum+tcp://hub.miningpoolhub.com:17001 -u user.1 -p d=640 --gridseed-options=baud=115200,freq=888,chips=5 --hotplug 30 --gridseed-override "48E981603731:freq=838,chips=40;48EF6F4B3734:freq=838,chips=40"

The initial difficulty comes up at 8.19k and basically I don't submit any shares from my 5chip Gridseeds.  640 difficulty on other pools seems to work okay as a baseline.

[webrats]

I am trying to login and get

Unable to login. Please check your email and password.

(Account may be locked if you try login several times with wrong password. Please check your email for instructions to unlock if you think it's locked.)


I already PM the OP but got no reply. Any other way of getting the account unlocked?

 

Bottom of the main page tells you how to contact the pool operator...

CONTACT
Contact miningpoolhub for private account verification, server error reports only. General questions should be asked on community and forum.
Twitter @MiningPoolHub
Email contact@miningpoolhub.com
Skype contact@miningpoolhub.com

I wrote an email 9 days ago and still havnt gotten a response

[borimol]

Now you can set starting difficulty value by typing like "d=0.01" at worker's password.

This would help big hash miners to catch up to its own hardware limit faster than ever.

1. Run your miner program and check your difficulty value.
    Keep in mind that difficulty value must be stabilized.
    We recommend you to get difficulty value at least after 10 minutes of mining.

2. Set this difficulty value to worker's password as "d=XXXX"
   ex) d=0.0312
   Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.

3. Now run your miner program again.
   You will see your miner running at the difficulty value you typed.

4. Difficulty value can go up and down again. It's not a bug.
    d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.


Far wrong diff value may corrected automatically, but you'd better write optimized value.

Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.

How do we do this in Awesome miner? Workers password is for all algos, and different algos have different difficulties.

[nh1rani]

Hoping someone can help provide some assistance!

Got 6 x GTX 1060 6GB running and I've just been trying to set up MiningPool, however in the benchmark for Excavator (v1.3.8a) it keeps crashing with the nvidia cuda error out of memory at line 1377.

I've tried changing the virtual memory allocation but this doesn't seem to have helped (tried 20gb,24gb,32gb,40gb)

Any help would be appreciated as I'm running out of ideas!

Thanks in advance

[Onbusy]

Are you using the MultiPoolMiner? If so, go into your MultiPoolMiner folder, into Miners, and delete any that say Excavator.  Should be .txt or .ps1 files.  I deleted it out and just used the other miners, I couldn't get it to work for me neither.

[nh1rani]

Are you using the MultiPoolMiner? If so, go into your MultiPoolMiner folder, into Miners, and delete any that say Excavator.  Should be .txt or .ps1 files.  I deleted it out and just used the other miners, I couldn't get it to work for me neither.

Yup using MultiPoolMiner.

I think I gotta get CCMiner working again because if i get rid of Excavator I've lost quite some exposure to mining crypto's which are highly profitable for me it seems.

CCMiner was unable to install due to the benchmark program not being able to download it from github, do I need to manually download and place in the Miner folder? How do I get the MultiPoolMiner to benchmark this again without running the reset benchmark script?

Thanks

[carlo_0000]

Are you using the MultiPoolMiner? If so, go into your MultiPoolMiner folder, into Miners, and delete any that say Excavator.  Should be .txt or .ps1 files.  I deleted it out and just used the other miners, I couldn't get it to work for me neither.

Yup using MultiPoolMiner.

I think I gotta get CCMiner working again because if i get rid of Excavator I've lost quite some exposure to mining crypto's which are highly profitable for me it seems.

CCMiner was unable to install due to the benchmark program not being able to download it from github, do I need to manually download and place in the Miner folder? How do I get the MultiPoolMiner to benchmark this again without running the reset benchmark script?

Thanks

you remover the file in stats  ccminer something hashrate