crowning
Full Member
Offline
Activity: 212
Merit: 100
Activity: -42
|
|
May 07, 2014, 08:59:03 PM Last edit: May 07, 2014, 09:57:08 PM by crowning |
|
What do you mean that it doesn't report assigned difficulty? I am also using the same miner. I can see the difficulty like "Accepted 09bb8886 Diff 0.103/0.020 GPU 0". 0.020 is the difficulty assigned.
Are you using the same workername for several miner rigs? You'd better separate each of them.
If it doesn't help, please tell me your username. I will look through it.
In most cases (there are rare exceptions) it reports "Accepted 288whatever Diff -0.000/-0.000 GPU 0 at Pool 0"Edit: Just tested the compiled version from the official Darkcoin homepage. This one reports "Accepted 26000000 Diff 0/0 GPU 0 at (null)" And ALL accepted shares of this one have 6 trailing zeros...
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
May 08, 2014, 06:27:12 AM |
|
What do you mean that it doesn't report assigned difficulty? I am also using the same miner. I can see the difficulty like "Accepted 09bb8886 Diff 0.103/0.020 GPU 0". 0.020 is the difficulty assigned.
Are you using the same workername for several miner rigs? You'd better separate each of them.
If it doesn't help, please tell me your username. I will look through it.
In most cases (there are rare exceptions) it reports "Accepted 288whatever Diff -0.000/-0.000 GPU 0 at Pool 0"Edit: Just tested the compiled version from the official Darkcoin homepage. This one reports "Accepted 26000000 Diff 0/0 GPU 0 at (null)" And ALL accepted shares of this one have 6 trailing zeros... How about using the miner we posted on our pool homepage? https://mega.co.nz/#!SQJC2ZQQ!w-m3MtZW2UcBxpp6c0Tewo0edeW8e30BP50lG2xcxwkIt's a bit older but miner speed is just same as the latest. It would be helpful if you attach or send me screenshot for it at info@miningpoolhub.comThanks.
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
May 08, 2014, 08:27:20 AM |
|
We are switching all Mining Pool Hub's payout system from PROP to PPLNS.
PROP and PPLNS is well known for most of pools, both payout type is good. Many miners suggested us to switch to PPLNS, and especially Jackpotcoin's block finding needs PPLNS payout for fair distribution.
So we switched PROP to PPLNS for all our coin pools.
This is not an issue for almost all miners. It's just different type of calculating every shares. You'll get almost similar amount of coins as before.
|
|
|
|
Zaxxon
Newbie
Offline
Activity: 31
Merit: 0
|
|
May 08, 2014, 09:14:18 AM |
|
Is there a problem with jackpotcoin pool? I've not been credited for any work for over an hour.
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
May 08, 2014, 09:29:26 AM |
|
Is there a problem with jackpotcoin pool? I've not been credited for any work for over an hour.
Server is calculating shares PPLNS for the first time. It only takes some time when switching It will be finished soon.
|
|
|
|
Zaxxon
Newbie
Offline
Activity: 31
Merit: 0
|
|
May 08, 2014, 09:30:20 AM |
|
Is there a problem with jackpotcoin pool? I've not been credited for any work for over an hour.
Server is calculating shares PPLNS for the first time. It only takes some time when switching It will be finished soon. Thank you for such a quick response. Take care!
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
May 08, 2014, 10:29:47 AM |
|
Is there a problem with jackpotcoin pool? I've not been credited for any work for over an hour.
Server is calculating shares PPLNS for the first time. It only takes some time when switching It will be finished soon. Thank you for such a quick response. Take care! Sure. We found jackpot just some minutes ago. Hope you earned coins too. Thanks.
|
|
|
|
crowning
Full Member
Offline
Activity: 212
Merit: 100
Activity: -42
|
|
May 08, 2014, 10:40:03 AM |
|
[...] We are switching all Mining Pool Hub's payout system from PROP to PPLNS [...]
While you look at this could you please have a deeper look into your share/payout system? I think there's something really weird going on with your pool. - When I look at the "Round" page, most people have zero shares but get paid according to their PROP share.
That's already unusual because I sometimes have dozens of rounds without any share listed for my account, but I get paid because I obviously have some. - Last night I found a block, the blockfinder stats say it was worth 12 DRK.
When I look at ALL possible found blocks with an amount of 12 DRK I should have at least ONE share for one of them because I have found it, right? But in this case all of those blocks say I have 0 shares. How can I find a block without a share?
PS: I'm, talking about the PROP system, maybe your change to PPLNS fixed this...
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
May 08, 2014, 10:54:36 AM |
|
[...] We are switching all Mining Pool Hub's payout system from PROP to PPLNS [...]
While you look at this could you please have a deeper look into your share/payout system? I think there's something really weird going on with your pool. - When I look at the "Round" page, most people have zero shares but get paid according to their PROP share.
That's already unusual because I sometimes have dozens of rounds without any share listed for my account, but I get paid because I obviously have some. - Last night I found a block, the blockfinder stats say it was worth 12 DRK.
When I look at ALL possible found blocks with an amount of 12 DRK I should have at least ONE share for one of them because I have found it, right? But in this case all of those blocks say I have 0 shares. How can I find a block without a share?
PS: I'm, talking about the PROP system, maybe your change to PPLNS fixed this... Well I know what it means. 0 Shares doesn't mean that you have submitted zero share. It's actually 0.1215 like things. Did you see the difficulty at miners reporting? You will usually see 0.01 ~ 0.16 shares submitted. Even at the top, You will usually see A:0 since it only shows decimal number. Our pool don't tweak share difficulty value but just show what each miners submitted. Other pool shows multiplying like 65536 to original difficulty value but it may result some confusion from what miner saying and what pool is saying. We will consider showing float number for exact share. Don't worry, your share is well calculated.
|
|
|
|
crowning
Full Member
Offline
Activity: 212
Merit: 100
Activity: -42
|
|
May 08, 2014, 11:01:18 AM |
|
[...] We are switching all Mining Pool Hub's payout system from PROP to PPLNS [...]
While you look at this could you please have a deeper look into your share/payout system? I think there's something really weird going on with your pool. - When I look at the "Round" page, most people have zero shares but get paid according to their PROP share.
That's already unusual because I sometimes have dozens of rounds without any share listed for my account, but I get paid because I obviously have some. - Last night I found a block, the blockfinder stats say it was worth 12 DRK.
When I look at ALL possible found blocks with an amount of 12 DRK I should have at least ONE share for one of them because I have found it, right? But in this case all of those blocks say I have 0 shares. How can I find a block without a share?
PS: I'm, talking about the PROP system, maybe your change to PPLNS fixed this... Well I know what it means. 0 Shares doesn't mean that you have submitted zero share. It's actually 0.1215 like things. Did you see the difficulty at miners reporting? You will usually see 0.01 ~ 0.16 shares submitted. Even at the top, You will usually see A:0 since it only shows decimal number. Our pool don't tweak share difficulty value but just show what each miners submitted. Other pool shows multiplying like 65536 to original difficulty value but it may result some confusion from what miner saying and what pool is saying. We will consider showing float number for exact share. Don't worry, your share is well calculated. Your explanation makes sense, thanks. I see the (pool-) difficulty only when a change is reported, in the accepted log-line it's still always 0. Maybe I'll have a look into the phm-sgminer code, WU is already reported as float, so it shouldn't be too hard to do this for A and R as well.
|
|
|
|
miningpoolhub (OP)
Legendary
Offline
Activity: 1456
Merit: 1006
Mining Pool Hub
|
|
May 09, 2014, 04:45:39 PM |
|
Aphroditecoin pool is closed
Yes, aphroditecoin is dead. As you may already know, aphroditecoin dev is gone away with their premined coins.
We didn't like to close the pool since there were still miners mining, but we couldn't find any other peers on the net recently. This is technical problem. We can't mine without peers.
So we are closing.
Thanks.
|
|
|
|
Spoetnik
Legendary
Offline
Activity: 1540
Merit: 1011
FUD Philanthropist™
|
|
May 09, 2014, 05:16:48 PM |
|
any chance i can get an invite pool operator man ? i have been working on cpu miners for this coin and would love to see what kind of feedback your pool has. hashharder sucks it doesn't tell me much eh also i can guarantee you i have no bad code for your pool (my so called cheat miner is just a really bad name for miner experiments) src is available of of course and i have little hash rate and just want to add a small CPU worker or two for testing.. i am trying to get 3 workers on 3 pools if you can pm me if yes thanks eh, if not just ignore me lol
|
FUD first & ask questions later™
|
|
|
Zaxxon
Newbie
Offline
Activity: 31
Merit: 0
|
|
May 09, 2014, 08:06:30 PM |
|
Jackpot pool stuck. No blocks found and no payouts for over 2 hrs now. Please look into it. Thanks!
|
|
|
|
Zaxxon
Newbie
Offline
Activity: 31
Merit: 0
|
|
May 10, 2014, 12:00:28 AM |
|
Jackpot pool stuck. No blocks found and no payouts for over 2 hrs now. Please look into it. Thanks!
Thank you for the fix. Everything is fine and bonus paid as well. Thanks again.
|
|
|
|
marcrenner
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 10, 2014, 07:19:05 PM |
|
I tried created some workers at your pool but I could never get them running. Im hashing over 2.5TH's at BTCGuild atm. The workers there fire right up. Got any suggestions? VVVVVVVVVVVVVVVV
|
|
|
|
Killermen
Newbie
Offline
Activity: 2
Merit: 0
|
|
May 10, 2014, 10:47:53 PM |
|
I tried created some workers at your pool but I could never get them running. Im hashing over 2.5TH's at BTCGuild atm. The workers there fire right up. Got any suggestions? VVVVVVVVVVVVVVVV I think because you try to mine a X11-Coin with a SHA256-algorithm, that doesn't work.
|
|
|
|
|
|
mistigris
Newbie
Offline
Activity: 9
Merit: 0
|
|
May 12, 2014, 07:40:04 PM |
|
hi i try to mine darkcoin with your pool. but i dont know if its work. i mine for 3 hours and i dont receive any payout. in the dashboard under pplns stat your valid. i have always 0 share. my miner seems correct whith no hw error and my hashrate is well reported in the dashboard. can you please tell me if its ok or if something is wrong ? thanks
|
|
|
|
braxx
|
|
May 12, 2014, 10:36:38 PM |
|
hi i try to mine darkcoin with your pool. but i dont know if its work. i mine for 3 hours and i dont receive any payout. in the dashboard under pplns stat your valid. i have always 0 share. my miner seems correct whith no hw error and my hashrate is well reported in the dashboard. can you please tell me if its ok or if something is wrong ? thanks
miningpoolhub is deffenitly finding blocks... ( http://drk.poolhash.org/poolhash.html) but it looks like the site cannot follow to calculate the pplns-shares... (usualy its around 3 or 4 blocks delayed)
|
|
|
|
|