[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[miningpoolhub]

What is wrong with Granite and Checkcoin?

What is wrong with Granite and Checkcoin?

Are your asking why Mpoolhub is removing or did you try mining and get disconnected? I came home from work to noticed I got disconnected from DGB-skein. If the former check Granite's block page and it is self explanatory. I would be curious about Checkcoin if I mined it, does not seem like low-interest...at least from the block page then again maybe 477 blocks in a week is low for that coin...

What is wrong with Granite and Checkcoin?

Are your asking why Mpoolhub is removing or did you try mining and get disconnected? I came home from work to noticed I got disconnected from DGB-skein. If the former check Granite's block page and it is self explanatory. I would be curious about Checkcoin if I mined it, does not seem like low-interest...at least from the block page then again maybe 477 blocks in a week is low for that coin...

I believe miningpoolhub is removing them because they consider them to be low profitability. Thing is I was actually making a good profit mining checkcoin.

Granite is not mined by many users. Low interest actually.
I'll run checkcoin then. Didn't know that it was profitable. Maybe from bter.com?

[1714292042]

1714292042

[1714292042]

1714292042

[1714292042]

1714292042

[1714292042]

1714292042

[1714292042]

1714292042

[1714292042]

1714292042

[miningpoolhub]

@miningpoolhub, I'm having some trouble withdrawing Potcoin. Could you please check the manual payouts that are stuck? Thanks.

Maybe you have noticed this at news page.
Potcoin pool has not been working for a year. Last mined block is 56 weeks ago.


Potcoin wallet was broken after the hardfork update. I started to reindex and rebuilding the database again now.
Maybe it would work this time.

Sorry for inconvenience.

[miningpoolhub]

[Checkcoin Mining Pool Hub]

As some miners requested Checkcoin pool to remain, I will not close checkcoin pool.

Thank you for feedback and suggestions.

[miningpoolhub]

[ Expanse Mining Pool Hub ]

https://expanse.miningpoolhub.com


Updated Expanse to latest version v1.4.16

[lyolyalya]

Yes I am also wondering why it is so fast changing, sometimes only 5 minutes for a certain coin. My Baikal miners don't have time to get to full hash speed and then it changes again??

i cant say anything regarding the api, but every miner always hashes at the same speed, there is no time it needs to get to full hashspeed. The only penalty there is is when switching occurs that fast that the overhead of restarting your miner (which takes about 0.1-1sec i guess) is limiting your earnings, but for that it would have to switch like every 10 secs or so.

no-no-no-no-no-no-no=)not mechanic of swithing=)let's try to explain...maybe, i mine ethhash,cause it is on top of norm profit...i earn my coins well,but...next minute norm profit is changing and maybe on the top of the is appearing skein or groestl(not matter)...okay...im swithing on it, and mine it for some minutes until ethash is back on top.here the question.how it can be profitable enough if i send my skein(or groestl) coin to exchange maybe the next day or something...if it was profitable only 10 minutes then what happens after few hours when i exchange my coins?they might be not worth the time i spent to mine...if there is some hub coin relates to profitability...you know...example - norm profit is 2 then with 100 mhs i collect 10 hubcoins.if norm profit is 1.7 then i earn 8.54 hubcoins...and then i exchange this coin to something - it would be simple,fast=)but there...i don't get it how this swithes can help me to mine more efficcient...help to understand...

you should not be worried about exchange prices, because pool uses bid prices, the profit comes from more mined coin on low difficulty, however you should be concerned that pool uses PPLNS that punishes coin hopping where you lose current unfinished round, say you mine dash for 3 hours, no block is being found but you are switched to something else, pool wipes those 3 hours.

PPLNS should be used only on one coin pools, as it gives more to those that do not switch at all!

thanks=)i just wanted to ask about difficulty factor in profitability=)that's make a sense=)now there is another problem=)i made batch file like in FAQ but there is no connection to any endpoint&am i missing something?ccminer...i tried algo switching on a zpool.ca and it works but their batch file looks different...
:start

ccminer -r 0 -a x11   -o stratum+tcp://x11.mine.zpool.ca:3533 -u joe -p x11,x13,x14,x15,quark,lyra2
ccminer -r 0 -a x13   -o stratum+tcp://x13.mine.zpool.ca:3633 -u joe -p x11,x13,x14,x15,quark,lyra2
ccminer -r 0 -a x15   -o stratum+tcp://x15.mine.zpool.ca:3733 -u joe -p x11,x13,x14,x15,quark,lyra2
ccminer -r 0 -a lyra2 -o stratum+tcp://lyra2v2.mine.zpool.ca:4433 -u joe -p x11,x13,x14,x15,quark,lyra2
ccminer -r 0 -a quark -o stratum+tcp://quark.mine.zpool.ca:4033 -u joe -p x11,x13,x14,x15,quark,lyra2

sleep 5000
goto start
is it missed in FAQ or what?

[lyolyalya]

sorry...it seems some tries and errors make it work...but not so fast as i expected...there was 5 minutes of myraid-groestl which was ignored...but from skein to ethash it was pretty fast...lets see...

[Xardas2014]

Ok, I have multi-algo switching problems and am apparently too daft to resolve it. I downloaded the all-in-one miner from here: https://github.com/miningpoolhub/all-in-one-miner/archive/20160728.zip extracted this zip and editted the run.bat. I set a worker on the hub page called Xardas.auto

Here is my run.bat:(which is a direct copy paste from the instruction with the username changed)

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

:start
ethminer --farm-retries 0 -G -S us-east1.ethash-hub.miningpoolhub.com:12020 -O Xardas.auto:x -FS exit
sgminer --no-retry -k vanilla -o stratum+tcp://hub.miningpoolhub.com:12019 -u Xardas.auto -p x
sgminer --no-retry -k groestlcoin -o stratum+tcp://hub.miningpoolhub.com:12004 -u Xardas.auto -p x
sgminer --no-retry -k myriadcoin-groestl -o stratum+tcp://hub.miningpoolhub.com:12005 -u Xardas.auto -p x
sgminer --no-retry -k neoscrypt -o stratum+tcp://hub.miningpoolhub.com:12012 -u Xardas.auto -p x
sgminer --no-retry -k quarkcoin -o stratum+tcp://hub.miningpoolhub.com:12015 -u Xardas.auto -p x
sgminer --no-retry -k qubitcoin -o stratum+tcp://hub.miningpoolhub.com:12014 -u Xardas.auto -p x
sgminer --no-retry -k skeincoin -o stratum+tcp://hub.miningpoolhub.com:12016 -u Xardas.auto -p x
sgminer --no-retry -k darkcoin-mod -o stratum+tcp://hub.miningpoolhub.com:12007 -u Xardas.auto -p x
sgminer --no-retry -k marucoin-mod -o stratum+tcp://hub.miningpoolhub.com:12008 -u Xardas.auto -p x
sgminer --no-retry -k bitblock -o stratum+tcp://hub.miningpoolhub.com:12009 -u Xardas.auto -p x
sgminer --no-retry -k lyra2rev2 -o stratum+tcp://hub.miningpoolhub.com:12018 -u Xardas.auto -p x

timeout 1
goto start

sgminer window opens and seems to retry over and over. Mining never starts. It loops through and detects the cards again, then goes back into a loop of retries that after 10 or so it detects the cards again. WHAT HAVE I MISSED???

Claymore mines at mininghubpool without problems and switches from ETH to ETC while dual mining SIA. Hell even my Zeus ASIC's mine at the pool fine. I have no problem with my Baikal miner either. Only problem is with the all-in-one setup.

I can't give you any error messages are any other info because I don't get any more info myself. Ideas?

Maybe there was some temporary error on server, and not working.


Would you try this again?
Can you tell me what coin is specified at auto switches page?

Tried again but still doesn't work. I tested sgminer by itself after setting up a .conf(copied from your site) and got this:

[15:24:12] Pool: 5  URL: stratum+tcp://hub.miningpoolhub.com:12003  User: Xardas.auto  Password: x
[15:24:12] Pool: 6  URL: stratum+tcp://hub.miningpoolhub.com:12001  User: Xardas.auto  Password: x
[15:24:12] Pool: 7  URL: stratum+tcp://hub.miningpoolhub.com:12002  User: Xardas.auto  Password: x
[15:24:12] Press any key to exit, or sgminer will try again in 15s.
[15:24:28] No servers were found that could be used to get work from.
[15:24:28] Please check the details from the list below of the servers you have input
[15:24:28] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[15:24:28] Pool: 0  URL: stratum+tcp://hub.miningpoolhub.com:12012  User: Xardas.auto  Password: x
[15:24:28] Pool: 1  URL: stratum+tcp://hub.miningpoolhub.com:12009  User: Xardas.auto  Password: x
[15:24:28] Pool: 2  URL: stratum+tcp://hub.miningpoolhub.com:12008  User: Xardas.auto  Password: x
[15:24:28] Pool: 3  URL: stratum+tcp://hub.miningpoolhub.com:12007  User: Xardas.auto  Password: x
[15:24:28] Pool: 4  URL: stratum+tcp://hub.miningpoolhub.com:12005  User: Xardas.auto  Password: x
[15:24:28] Pool: 5  URL: stratum+tcp://hub.miningpoolhub.com:12003  User: Xardas.auto  Password: x
[15:24:28] Pool: 6  URL: stratum+tcp://hub.miningpoolhub.com:12001  User: Xardas.auto  Password: x
[15:24:28] Pool: 7  URL: stratum+tcp://hub.miningpoolhub.com:12002  User: Xardas.auto  Password: x
[15:24:28] Press any key to exit, or sgminer will try again in 15s.

[Lercker]

Ok, I have multi-algo switching problems and am apparently too daft to resolve it. I downloaded the all-in-one miner from here: https://github.com/miningpoolhub/all-in-one-miner/archive/20160728.zip extracted this zip and editted the run.bat. I set a worker on the hub page called Xardas.auto

Here is my run.bat:(which is a direct copy paste from the instruction with the username changed)

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

:start
ethminer --farm-retries 0 -G -S us-east1.ethash-hub.miningpoolhub.com:12020 -O Xardas.auto:x -FS exit
sgminer --no-retry -k vanilla -o stratum+tcp://hub.miningpoolhub.com:12019 -u Xardas.auto -p x
sgminer --no-retry -k groestlcoin -o stratum+tcp://hub.miningpoolhub.com:12004 -u Xardas.auto -p x
sgminer --no-retry -k myriadcoin-groestl -o stratum+tcp://hub.miningpoolhub.com:12005 -u Xardas.auto -p x
sgminer --no-retry -k neoscrypt -o stratum+tcp://hub.miningpoolhub.com:12012 -u Xardas.auto -p x
sgminer --no-retry -k quarkcoin -o stratum+tcp://hub.miningpoolhub.com:12015 -u Xardas.auto -p x
sgminer --no-retry -k qubitcoin -o stratum+tcp://hub.miningpoolhub.com:12014 -u Xardas.auto -p x
sgminer --no-retry -k skeincoin -o stratum+tcp://hub.miningpoolhub.com:12016 -u Xardas.auto -p x
sgminer --no-retry -k darkcoin-mod -o stratum+tcp://hub.miningpoolhub.com:12007 -u Xardas.auto -p x
sgminer --no-retry -k marucoin-mod -o stratum+tcp://hub.miningpoolhub.com:12008 -u Xardas.auto -p x
sgminer --no-retry -k bitblock -o stratum+tcp://hub.miningpoolhub.com:12009 -u Xardas.auto -p x
sgminer --no-retry -k lyra2rev2 -o stratum+tcp://hub.miningpoolhub.com:12018 -u Xardas.auto -p x

timeout 1
goto start

sgminer window opens and seems to retry over and over. Mining never starts. It loops through and detects the cards again, then goes back into a loop of retries that after 10 or so it detects the cards again. WHAT HAVE I MISSED???

Claymore mines at mininghubpool without problems and switches from ETH to ETC while dual mining SIA. Hell even my Zeus ASIC's mine at the pool fine. I have no problem with my Baikal miner either. Only problem is with the all-in-one setup.

I can't give you any error messages are any other info because I don't get any more info myself. Ideas?

Maybe there was some temporary error on server, and not working.


Would you try this again?
Can you tell me what coin is specified at auto switches page?

Tried again but still doesn't work. I tested sgminer by itself after setting up a .conf(copied from your site) and got this:

[15:24:12] Pool: 5  URL: stratum+tcp://hub.miningpoolhub.com:12003  User: Xardas.auto  Password: x
[15:24:12] Pool: 6  URL: stratum+tcp://hub.miningpoolhub.com:12001  User: Xardas.auto  Password: x
[15:24:12] Pool: 7  URL: stratum+tcp://hub.miningpoolhub.com:12002  User: Xardas.auto  Password: x
[15:24:12] Press any key to exit, or sgminer will try again in 15s.
[15:24:28] No servers were found that could be used to get work from.
[15:24:28] Please check the details from the list below of the servers you have input
[15:24:28] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[15:24:28] Pool: 0  URL: stratum+tcp://hub.miningpoolhub.com:12012  User: Xardas.auto  Password: x
[15:24:28] Pool: 1  URL: stratum+tcp://hub.miningpoolhub.com:12009  User: Xardas.auto  Password: x
[15:24:28] Pool: 2  URL: stratum+tcp://hub.miningpoolhub.com:12008  User: Xardas.auto  Password: x
[15:24:28] Pool: 3  URL: stratum+tcp://hub.miningpoolhub.com:12007  User: Xardas.auto  Password: x
[15:24:28] Pool: 4  URL: stratum+tcp://hub.miningpoolhub.com:12005  User: Xardas.auto  Password: x
[15:24:28] Pool: 5  URL: stratum+tcp://hub.miningpoolhub.com:12003  User: Xardas.auto  Password: x
[15:24:28] Pool: 6  URL: stratum+tcp://hub.miningpoolhub.com:12001  User: Xardas.auto  Password: x
[15:24:28] Pool: 7  URL: stratum+tcp://hub.miningpoolhub.com:12002  User: Xardas.auto  Password: x
[15:24:28] Press any key to exit, or sgminer will try again in 15s.

Have you run this version of sgminer on any other pool or on a direct port at miningpoolhub? If not, do you have a firewall set up? Did you remember to set a hubswitch for your worker?

[miningpoolhub]

[ Ethereum Mining Pool Hub ]

Ethereum network is under attack. Coin transfer would take much longer time than before.

[miningpoolhub]

Tried again but still doesn't work. I tested sgminer by itself after setting up a .conf(copied from your site) and got this:

[15:24:12] Pool: 5  URL: stratum+tcp://hub.miningpoolhub.com:12003  User: Xardas.auto  Password: x
[15:24:12] Pool: 6  URL: stratum+tcp://hub.miningpoolhub.com:12001  User: Xardas.auto  Password: x
[15:24:12] Pool: 7  URL: stratum+tcp://hub.miningpoolhub.com:12002  User: Xardas.auto  Password: x
[15:24:12] Press any key to exit, or sgminer will try again in 15s.
[15:24:28] No servers were found that could be used to get work from.
[15:24:28] Please check the details from the list below of the servers you have input
[15:24:28] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[15:24:28] Pool: 0  URL: stratum+tcp://hub.miningpoolhub.com:12012  User: Xardas.auto  Password: x
[15:24:28] Pool: 1  URL: stratum+tcp://hub.miningpoolhub.com:12009  User: Xardas.auto  Password: x
[15:24:28] Pool: 2  URL: stratum+tcp://hub.miningpoolhub.com:12008  User: Xardas.auto  Password: x
[15:24:28] Pool: 3  URL: stratum+tcp://hub.miningpoolhub.com:12007  User: Xardas.auto  Password: x
[15:24:28] Pool: 4  URL: stratum+tcp://hub.miningpoolhub.com:12005  User: Xardas.auto  Password: x
[15:24:28] Pool: 5  URL: stratum+tcp://hub.miningpoolhub.com:12003  User: Xardas.auto  Password: x
[15:24:28] Pool: 6  URL: stratum+tcp://hub.miningpoolhub.com:12001  User: Xardas.auto  Password: x
[15:24:28] Pool: 7  URL: stratum+tcp://hub.miningpoolhub.com:12002  User: Xardas.auto  Password: x
[15:24:28] Press any key to exit, or sgminer will try again in 15s.

I tried your previous commandline settings from my computer and it worked smoothly.
It was mining ethereum when I ran it.

1. Please check whether your ethminer is doing well for Ethereum mining.
Maybe you would need to replace old version files to latest ethminer-genoil files since that mph repository may include older version that may not work with your rig.

2. And don't use sgminer conf file when you mix auto switch mining with ethash. It will not work as that sgminer binary doesn't support ethash and it will be not mining most of the time.

[Abcederian]

ZCash is coming.
Any plans for adding this?

[miningpoolhub]

ZCash is coming.
Any plans for adding this?

I have plan to add that coin. Many miners requested. 

[malorx]

Hi,

I just saw https://bittrex.com/Market/Index?MarketName=BTC-UFO. they plan to remove the Ufocoin from the site. So you might want to modify current multialgo coin for neoscrypt.

regards

[miningpoolhub]

[ Ethereum/Ethereum-Classic Mining Pool Hub Notice ]


Ethereum, Ethereum-Classic both networks are under critical attack.

1) Ethereum mining is working, but p2p network is experiencing sync delay and coin transfer errors.
    Pool statistics update and withdrawal will be done shortly.

2) As Ethereum-classic has few nodes and low hash, it is showing some fork phenomenon currently.
    All ETC mining resources are redirected to ETH mining temporarily.

[miningpoolhub]

Hi,

I just saw https://bittrex.com/Market/Index?MarketName=BTC-UFO. they plan to remove the Ufocoin from the site. So you might want to modify current multialgo coin for neoscrypt.

regards

Thanks!

[lyolyalya]

hello...don't like ethminer works...is it possible to run miltialgo with claymore dualminer?

[PeaMine]

Is Siacoin able to be auto converted to BTC?
Seems like that was added on the site.
If so, what instructions should I do for Claymore ETH+SIA?

I noticed others have the all in one miner, with numerous different algos with what seems to be mining all at once?
Is there a way to have MPH basically mine all algos on your card, and auto switches only the most profitable one?

I had thought this was only possible with ETH and ETH Classic etc since they are the same algo, but different coins.

[miningpoolhub]

[ Ethereum/Ethereum-Classic Mining Pool Hub notice ]

Ethereum, Ethereum-Classic both networks are under critical attack.


1) Ethereum mining/withdrawal is working as usual. Credited exact amounts for payouts that are omitted from blockchain. Please request manual payout again if you want to withdraw.

2) As Ethereum-classic has few nodes and low hash, some fork phenomenon happened currently. All ETC mining resources are redirected to ETH mining temporarily.

[PeaMine]

Is Siacoin able to be auto converted to BTC?
Seems like that was added on the site.
If so, what instructions should I do for Claymore ETH+SIA?

I noticed others have the all in one miner, with numerous different algos with what seems to be mining all at once?
Is there a way to have MPH basically mine all algos on your card, and auto switches only the most profitable one?

I had thought this was only possible with ETH and ETH Classic etc since they are the same algo, but different coins.

Do I need to use https://github.com/miningpoolhub/all-in-one-miner for this?

[miningpoolhub]

hello...don't like ethminer works...is it possible to run miltialgo with claymore dualminer?

I believe that's not possible.
Maybe contact to claymore about "one time connection try and exit if failed" option to be implemented. That would do the work.