GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[sxemini]

Dear developer if you reading this please add new coins.more coins more miners 

This won´t happen, i think it is dead, like T-Rex miner. And it is better to write in the Gminer discord to get informations.

[JayDDee]

Last official version from Zminer777 (master topic) is that  https://github.com/develsoftware/GMinerRelease/releases/tag/3.41


Beware for version above, could be an compromised (stollen account)!

EDIT:

It was deleted by staff, thanks!

Abandonned miners are easy targets to use as vehicles to spread malware, Claymore, Phoenix, now Gminer. A good rule is to always download from the OP.

[Zminer777]

GMiner v3.42 available for download

v3.42
+ improved miner stability

Telegram chat: https://t.me/gminer_talk
Telegram announcements: https://t.me/gminer_releases
Discord: https://discord.gg/J7RUG3FDYw

mmpOS update command:

Code:

cd /tmp && wget https://github.com/develsoftware/GMinerRelease/releases/download/3.42/gminer_3_42_linux64.tar.xz && tar -xvf gminer_3_42_linux64.tar.xz && cd /opt/mmp/miners/gminer && agent-stop && cp /tmp/miner . && agent-start

Hive OS update command:

Code:

cd /tmp && wget https://github.com/develsoftware/GMinerRelease/releases/download/3.42/gminer_3_42_linux64.tar.xz && tar -xvf gminer_3_42_linux64.tar.xz && cd /hive/miners/gminer && miner stop && cp /tmp/miner $(ls -d1 */ | tail -1)/gminer && miner start

minerstat OS update command:

Code:

cd /tmp; wget https://github.com/develsoftware/GMinerRelease/releases/download/3.42/gminer_3_42_linux64.tar.xz; tar -xvf gminer_3_42_linux64.tar.xz; sudo cp /tmp/miner /home/minerstat/minerstat-os/clients/gminer; mstart

[batsonxl]

Can someone help please.
Win10 64 22h2. P104-8gb. Mining zhash on nicehash gives share above target rejected. Tried everything no oc still gets target above. Is this bug?or someone knows? Thanks

[JayDDee]

Can someone help please.
Win10 64 22h2. P104-8gb. Mining zhash on nicehash gives share above target rejected. Tried everything no oc still gets target above. Is this bug?or someone knows? Thanks

Share above target is the same as low difficulty. Could be a bug or misconfiguration of either the miner, nicehash, or the actual coin.
Look for diff related options like diff-factor or diff-multiplier where you can tweak the target, Increase diff based on the rate of of rejects you're getting: 50% rejects increase by 2x.
Increase it too high and you'll reduce the effective hash rate by throwing away some valid shares.
This isn't a solution just a workaround.

[Zminer777]

GMiner v3.43 available for download

v3.43
+ added KarlsenHash and KarlsenHash+ZIL support for Nvidia GPUs (DevFee 1%)

Telegram chat: https://t.me/gminer_talk
Telegram announcements: https://t.me/gminer_releases
Discord: https://discord.gg/J7RUG3FDYw

mmpOS update command:

Code:

cd /tmp && wget https://github.com/develsoftware/GMinerRelease/releases/download/3.43/gminer_3_43_linux64.tar.xz && tar -xvf gminer_3_43_linux64.tar.xz && cd /opt/mmp/miners/gminer && agent-stop && cp /tmp/miner . && agent-start

Hive OS update command:

Code:

cd /tmp && wget https://github.com/develsoftware/GMinerRelease/releases/download/3.43/gminer_3_43_linux64.tar.xz && tar -xvf gminer_3_43_linux64.tar.xz && cd /hive/miners/gminer && miner stop && cp /tmp/miner $(ls -d1 */ | tail -1)/gminer && miner start

minerstat OS update command:

Code:

cd /tmp; wget https://github.com/develsoftware/GMinerRelease/releases/download/3.43/gminer_3_43_linux64.tar.xz; tar -xvf gminer_3_43_linux64.tar.xz; sudo cp /tmp/miner /home/minerstat/minerstat-os/clients/gminer; mstart

[Spill]

Decred has gone back to gpu mining,  could you guys ad blake3 pow for that coin?

[angelbbs]

On NiceHash any algo + ZIL, GMiner detect epoch 0 mining coin as ZIL mining (but true ZIL epoch 1, at this moment ). Its BUG.

[igotek]

--lock_cclock 1200 --mclock 1900

is it possible to set these values acording to algortihm ?

For example:
nexapow:  --lock_cclock 1600 --mclock 810
karlsenhash: --lock_cclock 1200 --mclock 810
etchash: ---lock_cclock 1150 --mclock 2900

I use HiveOS for all of my rigs.
I had to change manually this values each time I change the algo.
We can put them all in extra config then the miner automatically select it acording to the algorithm.

[WARMANGALAXY]

Yes. You can prescribe overclocking parameters for each flight sheet without using HiveOS overclocking just by specifying in extra config

[Zminer777]

GMiner v3.44 available for download

v3.44
+ added Dero and Dero + ZIL mining support on K1Pool (Nvidia only)

GPU Memory requirements:
13GB+, recommend card - RTX3090/RTX4090

Developer commission:
Dero - 5%
Dero + ZIL - 6% + 0%

Telegram chat: https://t.me/gminer_talk
Telegram announcements: https://t.me/gminer_releases
Discord: https://discord.gg/J7RUG3FDYw

mmpOS update command:

Code:

cd /tmp && wget https://github.com/develsoftware/GMinerRelease/releases/download/3.44/gminer_3_44_linux64.tar.xz && tar -xvf gminer_3_44_linux64.tar.xz && cd /opt/mmp/miners/gminer && agent-stop && cp /tmp/miner . && agent-start

Hive OS update command:

Code:

cd /tmp && wget https://github.com/develsoftware/GMinerRelease/releases/download/3.44/gminer_3_44_linux64.tar.xz && tar -xvf gminer_3_44_linux64.tar.xz && cd /hive/miners/gminer && miner stop && cp /tmp/miner $(ls -d1 */ | tail -1)/gminer && miner start

minerstat OS update command:

Code:

cd /tmp; wget https://github.com/develsoftware/GMinerRelease/releases/download/3.44/gminer_3_44_linux64.tar.xz; tar -xvf gminer_3_44_linux64.tar.xz; sudo cp /tmp/miner /home/minerstat/minerstat-os/clients/gminer; mstart

[igotek]

gminer v3.44

--pl     from -50 to 200

Why ?

I want to use --pl for RTX3090 with 330W. But it gives error.
I think --pl in gminer as percent not W.
is it possible to set power limit as watt ?

IMAGE:
https://i.imgur.com/6A6YgDP.png

I use this command (--lock_cclock 1050 --cclock 200 --mclock 0) for kawpow RTX3090.
It is good for me. No high temp.

I m getting high temp if I mine kawpow + zil (mining zil)
So i had to put power limit 330W.

I also tried this command (--lock_cclock 1050 --cclock 200 --mclock 0 --zillock 1125 --zilmclock 0)
It gives error.

IMAGE:
https://i.imgur.com/DJrKfHY.png

[igotek]

About DERO:

Hiveos Config Image:
https://i.imgur.com/UOVbaY3.png

ERROR:
14:15:58 Connected to community-pools.mysrv.cloud:10300 [167.235.7.72]
14:15:58 Connection Error: Connection closed

I can mine DERO with astronv miner at this pool.
is there any special settings for gminer ?

[1971ECPT]

6%? Greedy! That's why I never use Gminer.

[batsonxl]

Please someone tell me why gminer consuming my celeron g3900 at 90%??
Win10/12 p104gpus/8gb ram/128gb ssd

[miner29]

Please someone tell me why gminer consuming my celeron g3900 at 90%??
Win10/12 p104gpus/8gb ram/128gb ssd

Possibly share or dag verification.  If you can turn them off and see if it reduces cpu load.

[igotek]

TENZ (Tenzura) Overclock Settings + Mining Pools + Exchanges  + Miners

https://youtu.be/3Hh5aQkDkmA

🚀 Unlock the Ultimate TENZURA Mining Guide: Maximize Your Profits Now! 💰

Ready to supercharge your TENZ (Tenzura) mining operation? This comprehensive guide is your ticket to maximizing profits and optimizing your setup. Whether you're a seasoned miner or just starting out, we've got you covered!

The overclock settings for NVIDIA Graphic Cards are optimized for GMiner.

[alphaTigris]

Where can I download GMiner v2.75 for windows?

[1971ECPT]

The trusty one, as I know 3.44 is the last one

https://github.com/develsoftware/gminerrelease/releases

[alphaTigris]

I know about this But v2.75 is last version with Equihash 192,7 algo and this is not on the developer's github