GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[ASCiiDiTY]

o7

My level of frustration explode to infinite loop error coz i hate illogical situation
SO: Windows 7 miner work
SO: Windows 10 miner fail alocate dang
GIGABYTE NVIDIA GeForce GTX 1060 3GB it is a secondary on completely free, unplug from any monitor
So i really do not get it WHY ?!?!



p.s. for ppls who will want to say 3G Vram gpu can't be use on RVN or ETC here proff they can be use ... but only on linux or on win 7 ... only on windows 10 miner it fail to generate dang

It works on Windows 10 Enterprise N LTSC version.

hmm i have windows 10 Pro probabil it wil be same on win 10 home or normal edition soo gminer it have a issue with that system

It will work in either LTSC version which is stripped down a bit, or Server editions.. but not normal win 10. Trust me, try it..

[1714772584]

1714772584

[1714772584]

1714772584

[1714772584]

1714772584

[sir_blacks]

o7

My level of frustration explode to infinite loop error coz i hate illogical situation
SO: Windows 7 miner work
SO: Windows 10 miner fail alocate dang
GIGABYTE NVIDIA GeForce GTX 1060 3GB it is a secondary on completely free, unplug from any monitor
So i really do not get it WHY ?!?!



p.s. for ppls who will want to say 3G Vram gpu can't be use on RVN or ETC here proff they can be use ... but only on linux or on win 7 ... only on windows 10 miner it fail to generate dang

It works on Windows 10 Enterprise N LTSC version.

hmm i have windows 10 Pro probabil it wil be same on win 10 home or normal edition soo gminer it have a issue with that system

It will work in either LTSC version which is stripped down a bit, or Server editions.. but not normal win 10. Trust me, try it..

yup i know and i see Win 10 pro, normal, that's i make post to ... it not working and for that my frustration lvl it explode coz i not see any logical reason why not, basic mathematics (elementary one) it show everything it is fine but nop result it is other 
conclusion or gminer it have a memory leak some were on normal win 10 or win 10 it have something extra what screw up miner when it try to run ...
atm i give up and i am stuck on a old windows 7 till i will get bored but still a illogical thing it is annoying as frack
cheers

[ajax76]

For those of you with rx 6800 cards : I recently switched from phoenixminer to gminer (due to PM errors after epoch 412) . This was the best thing to do ever, hashrates are 1-2 mh/sec lower BUT are stable, not fluctuating anymore. Also 3xxx series seem to have minimal hashrate and stability increase.

Thank you Gminer developers, you are doing an awesome job

[ajax76]

Back again, I do have an actual problem : Gminer is filling up my free ram. It will be full soon, so any ideas how to free it up? Thanks in advance

[fanmir]

Hello,

Starting from version 2.53 or 2.54 I am getting "Invalid memory access" every couple of hours and miner is restarting (1080 or 3070)

In version 2.52 no any problems - miner can works without resets for weeks.

[YukitoEiri]

In this miner, you can see the transfer speed to the pool like a phoenix? I'm thinking of switching from Phoenix to this miner.

[highlander1992]

In this miner, you can see the transfer speed to the pool like a phoenix? I'm thinking of switching from Phoenix to this miner.

yes you can + this miner is faster then phoenix

[delatour]

GMiner v2.54 available for download

v2.54
+ generates valid DAG on higher OC modes
+ improved speed of DAG generation (up to 2x)

Ethash fee is 0.65%
KAWPOW fee is 1%

Hello Gminer team :-)

You removed xmv (monerov) just after 2.39
You may watch your wallet and noticed it pumped a few times : https://tradeogre.com/exchange/BTC-XMV
I gave you, i hope, a nice 10% fee :-D

Bad news is they shut down the official pool and 2.39 pointed to that pool, so now, it doesnt see the pool and disconnects constantly. I cant use gminer anymore, and their official miner is slow as hell.

I wonder if you can point the mining fee to another pool ( https://miningpoolstats.stream/monerov ) or maybe just kill the mining fee if you are not interested in monerov anymore ? And release that new version...

Thank you in advance :-)

Edit : that said, https://blog.monerov.online/monerov-micropool-how-to-guide/ is most of the hashrate, so if gminer could work with the solo pool it would be great

[Cryptoseekert]

hello guys i hope you are doing good

i wanted to ask:
is there any command for target temperature? so the fans automatically adjust to get to that temp?
so i dont have to put a fixed fan speed?

also, how is it the hashrate of rx 570 4gb on kawpow ravencoin windows 10?


thanks

[sxemini]

hello guys i hope you are doing good

i wanted to ask:
is there any command for target temperature? so the fans automatically adjust to get to that temp?
so i dont have to put a fixed fan speed?

also, how is it the hashrate of rx 570 4gb on kawpow ravencoin windows 10?


thanks

Use Teamredminer, it is the fastest miner for AMD on kawpow.

[WARMANGALAXY]

hello guys i hope you are doing good

i wanted to ask:
is there any command for target temperature? so the fans automatically adjust to get to that temp?
so i dont have to put a fixed fan speed?

also, how is it the hashrate of rx 570 4gb on kawpow ravencoin windows 10?


thanks

--tfan' - space-separated list of target temperatures for fan (0 - ignore), only Windows is supported (for example: '65 0 70')
--tfan_min' - space-separated list of minimal fan speed (0 - ignore) for tfan option, only Windows is supported (for example: '30 0 35') 
--tfan_max' - space-separated list of maximal fan speed (0 - ignore) for tfan option, only Windows is supported (for example: '90 0 80')

[Digital_Seytan]

Hello Good day GM DEV,

Please ad  The mining algorithm Autolykos2 is for ERGO coin.


 

[birdjan]

your gm25.4 is the best miner for eth for my gtx1070.Can you add support for ergo coin? Regards from Serbia.

[dlare9]

Keep getting this type of error. Any idea on why does this happens.

https://imgur.com/7U1TuMV

[Cryptoseekert]

hello guys i hope you are doing good

i wanted to ask:
is there any command for target temperature? so the fans automatically adjust to get to that temp?
so i dont have to put a fixed fan speed?

also, how is it the hashrate of rx 570 4gb on kawpow ravencoin windows 10?


thanks

Use Teamredminer, it is the fastest miner for AMD on kawpow.

thanks
sadly, trm does not support core and mem clocks/voltage on the miner. is there a way to control that ? as msi afterburner has been a pain i am used to use commands on the miner for target temperature and clocks volts

thanks

[Cryptoseekert]

hello guys i hope you are doing good

i wanted to ask:
is there any command for target temperature? so the fans automatically adjust to get to that temp?
so i dont have to put a fixed fan speed?

also, how is it the hashrate of rx 570 4gb on kawpow ravencoin windows 10?


thanks

--tfan' - space-separated list of target temperatures for fan (0 - ignore), only Windows is supported (for example: '65 0 70')
--tfan_min' - space-separated list of minimal fan speed (0 - ignore) for tfan option, only Windows is supported (for example: '30 0 35') 
--tfan_max' - space-separated list of maximal fan speed (0 - ignore) for tfan option, only Windows is supported (for example: '90 0 80')

thanks you

i am getting this:
gygabite radeon rx 570 4gb not supported for this algorithm i ma using kawpow ravencoin on windows 10

is that true? or is an error? or do i need to do something else?

thanks

[WARMANGALAXY]

hello guys i hope you are doing good

i wanted to ask:
is there any command for target temperature? so the fans automatically adjust to get to that temp?
so i dont have to put a fixed fan speed?

also, how is it the hashrate of rx 570 4gb on kawpow ravencoin windows 10?


thanks

--tfan' - space-separated list of target temperatures for fan (0 - ignore), only Windows is supported (for example: '65 0 70')
--tfan_min' - space-separated list of minimal fan speed (0 - ignore) for tfan option, only Windows is supported (for example: '30 0 35') 
--tfan_max' - space-separated list of maximal fan speed (0 - ignore) for tfan option, only Windows is supported (for example: '90 0 80')

thanks you

i am getting this:
gygabite radeon rx 570 4gb not supported for this algorithm i ma using kawpow ravencoin on windows 10

is that true? or is an error? or do i need to do something else?

thanks

You need to use linux

[sxemini]

hello guys i hope you are doing good

i wanted to ask:
is there any command for target temperature? so the fans automatically adjust to get to that temp?
so i dont have to put a fixed fan speed?

also, how is it the hashrate of rx 570 4gb on kawpow ravencoin windows 10?


thanks

--tfan' - space-separated list of target temperatures for fan (0 - ignore), only Windows is supported (for example: '65 0 70')
--tfan_min' - space-separated list of minimal fan speed (0 - ignore) for tfan option, only Windows is supported (for example: '30 0 35')  
--tfan_max' - space-separated list of maximal fan speed (0 - ignore) for tfan option, only Windows is supported (for example: '90 0 80')

thanks you

i am getting this:
gygabite radeon rx 570 4gb not supported for this algorithm i ma using kawpow ravencoin on windows 10

is that true? or is an error? or do i need to do something else?

thanks

You need to use linux

Why? 4GB are enough for mining kawpow on windows10!!

hello guys i hope you are doing good

i wanted to ask:
is there any command for target temperature? so the fans automatically adjust to get to that temp?
so i dont have to put a fixed fan speed?

also, how is it the hashrate of rx 570 4gb on kawpow ravencoin windows 10?


thanks

--tfan' - space-separated list of target temperatures for fan (0 - ignore), only Windows is supported (for example: '65 0 70')
--tfan_min' - space-separated list of minimal fan speed (0 - ignore) for tfan option, only Windows is supported (for example: '30 0 35')  
--tfan_max' - space-separated list of maximal fan speed (0 - ignore) for tfan option, only Windows is supported (for example: '90 0 80')

thanks you

i am getting this:
gygabite radeon rx 570 4gb not supported for this algorithm i ma using kawpow ravencoin on windows 10

is that true? or is an error? or do i need to do something else?

thanks

Use Teamredminer for rx570 and kawpow. It is the fastest one for AMD. Hashrate for RX570 13 - 14 mh on kawpow with Teamredminer

[Cryptoseekert]

hello guys i hope you are doing good

i wanted to ask:
is there any command for target temperature? so the fans automatically adjust to get to that temp?
so i dont have to put a fixed fan speed?

also, how is it the hashrate of rx 570 4gb on kawpow ravencoin windows 10?


thanks

--tfan' - space-separated list of target temperatures for fan (0 - ignore), only Windows is supported (for example: '65 0 70')
--tfan_min' - space-separated list of minimal fan speed (0 - ignore) for tfan option, only Windows is supported (for example: '30 0 35')  
--tfan_max' - space-separated list of maximal fan speed (0 - ignore) for tfan option, only Windows is supported (for example: '90 0 80')

thanks you

i am getting this:
gygabite radeon rx 570 4gb not supported for this algorithm i ma using kawpow ravencoin on windows 10

is that true? or is an error? or do i need to do something else?

thanks

You need to use linux

Why? 4GB are enough for mining kawpow on windows10!!

hello guys i hope you are doing good

i wanted to ask:
is there any command for target temperature? so the fans automatically adjust to get to that temp?
so i dont have to put a fixed fan speed?

also, how is it the hashrate of rx 570 4gb on kawpow ravencoin windows 10?


thanks

--tfan' - space-separated list of target temperatures for fan (0 - ignore), only Windows is supported (for example: '65 0 70')
--tfan_min' - space-separated list of minimal fan speed (0 - ignore) for tfan option, only Windows is supported (for example: '30 0 35')  
--tfan_max' - space-separated list of maximal fan speed (0 - ignore) for tfan option, only Windows is supported (for example: '90 0 80')

thanks you

i am getting this:
gygabite radeon rx 570 4gb not supported for this algorithm i ma using kawpow ravencoin on windows 10

is that true? or is an error? or do i need to do something else?

thanks

Use Teamredminer for rx570 and kawpow. It is the fastest one for AMD. Hashrate for RX570 13 - 14 mh on kawpow with Teamredminer

thank you very much for your answer.

i am using trm, the thing is, trm cant control via commands core clock, memclock, voltage, target temperature, etc.

what can i use for that? i am trying msi afterburner, but it has some issues (sometimes it gets the clocks and voltages only on the 1st gpu, i have to use a flat fan speed, etc)

is there other software that is better than msi afterburner?
thanks again

[solved.tech]

Hi,

don't know if anyone else has this issue, but I have 2 Navi (5600XT) and 2 Big Navi (6800XT) cards and I get an error when using --mclock option that memory clock couldn't be set for Big Navi and I need to run miner as admin (win10; gminer 2.54) ...
But I am running it in admin mode and miner sets memory speed for Navi cards without any errors, but not for Big Navi ...

Don't know if this is a bug or something, but it is weird ...

Thanks.