GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[nosidefcp]

i wanna ditch teamredminer so bad but i cant reach the results on gminer for a single 5700 i have left. any special settings/configs for hive? its my last card on teamredmienr, all the others are working perfect on gminer

[rangefinder]

Any chance you could lower the dev fee on Cortex CTXC, or keep working on it to improve hashrate? I don't remember the last time something changed about CTXC miner.
5% is so much even if you have no competitors out there. Pls let Cortex miners have some love. 

[webhead]

does gminer support rtx3070ti because it wont start on my cards.

[DragonbornSoulI]

Hi, i am interested which ports and pools are used for dev fee. Need that info to open them for use. Anyone can help me?
Most of the software has hardware requrements. Will be very nice to publish or write Gminer requirements in readme file or in github. Miners should know if they block some of the developer fee servers, ports, links or something else as ports which are important for work of Gminer.  It will cost nothing to publish them and it my help to some miners to get rid off troubles or problems. Hope developers can do it for miners. I would do it if i was a developer.   ;)
Problem. - - - - - Discord link for joining on Gminer site not working.    

[ayiphelmy]

GMiner v2.72 available for download

v2.72
+ fixed memory leaks on AMD GPUs
+ fixed compatibility with latest linux distributions
+ fixed crashes appeared in v2.71

Ethash fee is 0.65%
KAWPOW fee is 1%

can u fix cortex algo for rtx 3090? always crash on start in windows 10

[deedeeranged]

GMiner v2.72 available for download

v2.72
+ fixed memory leaks on AMD GPUs
+ fixed compatibility with latest linux distributions
+ fixed crashes appeared in v2.71

Ethash fee is 0.65%
KAWPOW fee is 1%

can u fix cortex algo for rtx 3090? always crash on start in windows 10

Gminer 2.73 isavailable see earlier post #2510. You can download it from gminer github releases.

[ayiphelmy]

GMiner v2.72 available for download

v2.72
+ fixed memory leaks on AMD GPUs
+ fixed compatibility with latest linux distributions
+ fixed crashes appeared in v2.71

Ethash fee is 0.65%
KAWPOW fee is 1%

can u fix cortex algo for rtx 3090? always crash on start in windows 10

Gminer 2.73 isavailable see earlier post #2510. You can download it from gminer github releases.

its fix for cortex?

[dedizonesv2]

GMiner v2.72 available for download

v2.72
+ fixed memory leaks on AMD GPUs
+ fixed compatibility with latest linux distributions
+ fixed crashes appeared in v2.71

Ethash fee is 0.65%
KAWPOW fee is 1%

can u fix cortex algo for rtx 3090? always crash on start in windows 10

Gminer 2.73 isavailable see earlier post #2510. You can download it from gminer github releases.

its fix for cortex?

See changelog and Issue: https://github.com/develsoftware/GMinerRelease/issues

[willi9974]

if i have a LHR card is it better to set the memory frequency to the max from +1500 or lower +1400?
the core should be less as possible -502
power limit low as possible? at the moment by 64%

any suggestions for my first LHR card?
i have a KFA2 GeForce RTX 3070 EX 1-Click OC 8GB LHR

Code:

+---+-----+-----------+------+------+-----+-------------+
| ID  GPU     Speed    Shares  Best  Power  Efficiency  |
+---+-----+-----------+------+------+-----+-------------+
|  0  3070  63.09 MH/s 26/0/0 82.51G 129 W  489.11 KH/W |
|  1  3070  62.60 MH/s 24/0/0 579.1G 125 W  500.80 KH/W |
|  2  3070  45.21 MH/s  6/0/1 56.59G 128 W  353.19 KH/W |
|          170.90 MH/s 56/0/1 579.1G 382 W  447.39 KH/W |
+---+-----+-----------+------+------+-----+-------------+
+---+-----+----+-----+----+-----+----+------+
| ID  GPU  Temp  Fan  Core  Mem  Kern  LHR  |
+---+-----+----+-----+----+-----+----+------+
|  0  3070   56  75 %  930  8300    3   N/A |
|  1  3070   47  48 %  855  8151    4   N/A |
|  2  3070   47  49 % 1035  8300  N/A  71 % |
+---+-----+----+-----+----+-----+----+------+
23:50:03 Pool: eth-eu1.nanopool.org:9999 [51.15.89.69]
23:50:03 Pool Hashrate: 181.17 MH/s Efficiency: 106.01 %
23:50:03 Shares/Minute: 1.09
23:50:03 Uptime: 0d 00:51:31 Electricity: 0.325 kWh

the ratio of the hashrate and the found shares, somehow does not fit at all

6 shares on the LHR card and over 24 on the other NON LHR cards in a time from 51 min.

Best regards
Willi

[issie81]

Is there a way to print/show max diff hit by miner (like t-rex)

running this on Linux
2.71 release notes says

+ Display maximum difficulty of shares for each GPU


x[2021-12-07 17:20:24][info][miner/0]: |  2  3090   36  90 % 1155 10702    6 |                                                                                                                                                              x
x[2021-12-07 17:20:24][info][miner/0]: |  3  3090   46  90 % 1155 10702    6 |                                                                                                                                                              x
x[2021-12-07 17:20:24][info][miner/0]: |  4  3090   42  90 % 1155 10702    6 |                                                                                                                                                              x
x[2021-12-07 17:20:24][info][miner/0]: |  5  3090   44  90 % 1155 10702    4 |                                                                                                                                                              x
x[2021-12-07 17:20:24][info][miner/0]: |  6  3090   35  90 % 1155 10702    6 |                                                                                                                                                              x
x[2021-12-07 17:20:24][info][miner/0]: |  7  3090   45  90 % 1155 10702    6 |                                                                                                                                                              x
x[2021-12-07 17:20:24][info][miner/0]: +---+-----+----+-----+----+-----+-----+                                                                                                                                                              x
x[2021-12-07 17:20:24][info][miner/0]: 17:20:23 Pool: solo-eth.2miners.com:6060 [51.195.88.16]                                                                                                                                              x
x[2021-12-07 17:20:24][info][miner/0]: 17:20:23 Pool Hashrate: 937.27 MH/s Efficiency: 95.37 %                                                                                                                                              x
x[2021-12-07 17:20:24][info][miner/0]: 17:20:23 Shares/Minute: 3.22                                                                                                                                                                         x
x[2021-12-07 17:20:24][info][miner/0]: 17:20:23 Uptime: 0d 00:09:00 Electricity: 0.369 kWh                                                                                                                                                  x
x[2021-12-07 17:20:28][info][miner/0]: 17:20:26 New Job: 86168846 Epoch: #458 Block: #13759797 Diff: 17.45G                                                                                                                                 x
x[2021-12-07 17:20:28][info][miner/0]: 17:20:27 GPU5: Share #4 verified on CPU, difficulty: 54.46G                                                                                                                                          x
x[2021-12-07 17:20:28][info][miner/0]: 17:20:27 GPU5: Share #4 accepted 17 ms     

[Zminer777]

GMiner v2.74 available for download

v2.74
+ contest, prizes: 25 x 0.2 ETH
+ improved stability for LHR mining
+ improved LHR auto-tune
+ now --proxy option using for user and dev fee connections
+ added option to disable non ssl dev fee connections (--dev_fee_ssl 0)
+ fixed --tfan on some RTX30xx cards

contest rules
1.  you need to use gminer from version 2.73 or higher
2.  for participation in contest, you need to run miner with "--contest_wallet ETH_WALLET" parameter, accordingly specifying a valid Eth wallet in the parameter (for example: --contest_wallet 0x5218597d48333d4a70cce91e810007b37e2937b5)
3.  condition for participation in contest is use of gminer on any algorithm and with any hashrate with --contest_wallet parameter for at least 168 hours
4.  each rig participating in contest has same weight regardless of hashrate (from laptop to rig with 20 cards)
5.  miner notifies contest server every hour of continuous work, server remembers number of hours worked and wallet for contest specified in --contest_wallet parameter
6.  user ID is set of hardware IDs, there is no point in running multiple copies of the miner in parallel on same rig, this does not increase chances of winning
7.  miner running on multiple rigs, even with same Eth wallet specified in the --contest_wallet parameter, increases chances of winning in proportion to number of rigs
8.  server stores number of hours worked, miner can be restarted without losing accumulated time
9.  in process of working with --contest_wallet parameter, current progress in fulfilling conditions of contest is displayed under statistics table (for example, Contest: 7/168)
10. in order to become participant in contest and fulfill the necessary conditions, period of time equal to a week is given
11. at end of contest, data about users (serial number, unique identifier, Eth wallet) who have fulfilled all conditions are uploaded to numbered list and placed in public access
12. winners are selected from public list of participants using online roulette in live broadcast
13. each of winners is sent certain amount of coins to Eth wallet specified in the --contest_wallet parameter
14. each participant can win unlimited number of times
15. use --user_id option to get unique id of rig
16. list of participants is periodically published in "Gminer Talk" group ( https://t.me/gminer_talk )

prizes: 25 x 0.2 ETH
constest start date: 12/08/2021
constest end date: 12/29/2021

Ethash fee is 0.65%
KAWPOW fee is 1%

[deedeeranged]

How to add contest_wallet when you are using a .conf file?

Edit: Never mind figured it out 

[coinmentos]

Hello GMiner devs

I have this issue. I was with fedora 33 OS and have used gminer 2.70 version without any problem. But i decided to upgrade to the latest distro fedora 35 .  I also upgraded to the latest Nvidia drivers at the time of OS upgrading.

After the upgrade my Gminer doesn't work and when start it shows this

"Miner terminated, watchdog will restart process after 10 seconds"


I decided to download the latest Gminer version 2.74 but when I check it with virustotal it shows that has viruses malware  ( the version 2.70 and bellow didn't have this issue ) so I didn't dare to use it.
( https://www.virustotal.com/gui/file/95c227fb11899a504e21e5082646bf566a14d513ef98e8ca0f795d9d13ebc799 )

So my question is - what could be the problem with 2.70 version and is this a reported issue already .. how to manage with that problem?

Just to inform that my GPUS (NVIDIA GTX 1070 ) works OK with Phoenixminer but for some reason they stopped to work with Gminer after the upgrade.

[miner29]

Hello GMiner devs

I have this issue. I was with fedora 33 OS and have used gminer 2.70 version without any problem. But i decided to upgrade to the latest distro fedora 35 .  I also upgraded to the latest Nvidia drivers at the time of OS upgrading.

After the upgrade my Gminer doesn't work and when start it shows this

"Miner terminated, watchdog will restart process after 10 seconds"


I decided to download the latest Gminer version 2.74 but when I check it with virustotal it shows that has viruses malware  ( the version 2.70 and bellow didn't have this issue ) so I didn't dare to use it.
( https://www.virustotal.com/gui/file/95c227fb11899a504e21e5082646bf566a14d513ef98e8ca0f795d9d13ebc799 )

So my question is - what could be the problem with 2.70 version and is this a reported issue already .. how to manage with that problem?

Just to inform that my GPUS (NVIDIA GTX 1070 ) works OK with Phoenixminer but for some reason they stopped to work with Gminer after the upgrade.

Did you go to the first post of this thread and download from the link provided by OP?
If you did then both linux and windows 2.74 show ZERO on virustotal.
You can go check yourself.  I just did both.

You most likely got them from a malware site because the files on the offical OP site are clean.

Be careful and always got to the OPs listed D/L site….nowhere else for miner software.

[coinmentos]

Hello GMiner devs

I have this issue. I was with fedora 33 OS and have used gminer 2.70 version without any problem. But i decided to upgrade to the latest distro fedora 35 .  I also upgraded to the latest Nvidia drivers at the time of OS upgrading.

After the upgrade my Gminer doesn't work and when start it shows this

"Miner terminated, watchdog will restart process after 10 seconds"


I decided to download the latest Gminer version 2.74 but when I check it with virustotal it shows that has viruses malware  ( the version 2.70 and bellow didn't have this issue ) so I didn't dare to use it.
( https://www.virustotal.com/gui/file/95c227fb11899a504e21e5082646bf566a14d513ef98e8ca0f795d9d13ebc799 )

So my question is - what could be the problem with 2.70 version and is this a reported issue already .. how to manage with that problem?

Just to inform that my GPUS (NVIDIA GTX 1070 ) works OK with Phoenixminer but for some reason they stopped to work with Gminer after the upgrade.

Did you go to the first post of this thread and download from the link provided by OP?
If you did then both linux and windows 2.74 show ZERO on virustotal.
You can go check yourself.  I just did both.

You most likely got them from a malware site because the files on the offical OP site are clean.

Be careful and always got to the OPs listed D/L site….nowhere else for miner software.

Thanks for you reply.
I downloaded Gminer from the official github repository - and if you check the linux version it has been detected as malware by some of the soft on Virustotal  - check the link in my  first post. ( unzip the archive and check "miner" file for linux version )

[miner29]

Hello GMiner devs

I have this issue. I was with fedora 33 OS and have used gminer 2.70 version without any problem. But i decided to upgrade to the latest distro fedora 35 .  I also upgraded to the latest Nvidia drivers at the time of OS upgrading.

After the upgrade my Gminer doesn't work and when start it shows this

"Miner terminated, watchdog will restart process after 10 seconds"


I decided to download the latest Gminer version 2.74 but when I check it with virustotal it shows that has viruses malware  ( the version 2.70 and bellow didn't have this issue ) so I didn't dare to use it.
( https://www.virustotal.com/gui/file/95c227fb11899a504e21e5082646bf566a14d513ef98e8ca0f795d9d13ebc799 )

So my question is - what could be the problem with 2.70 version and is this a reported issue already .. how to manage with that problem?

Just to inform that my GPUS (NVIDIA GTX 1070 ) works OK with Phoenixminer but for some reason they stopped to work with Gminer after the upgrade.

Did you go to the first post of this thread and download from the link provided by OP?
If you did then both linux and windows 2.74 show ZERO on virustotal.
You can go check yourself.  I just did both.

You most likely got them from a malware site because the files on the offical OP site are clean.

Be careful and always got to the OPs listed D/L site….nowhere else for miner software.

Thanks for you reply.
I downloaded Gminer from the official github repository - and if you check the linux version it has been detected as malware by some of the soft on Virustotal  - check the link in my  first post. ( unzip the archive and check "miner" file for linux version )

Something isnt right with your first link...

Here is the current link of 2.74 from OPs 1st post link

https://www.virustotal.com/gui/url/a54e1fd622482186c96034c4c1a2a8ece0839624baaf716e9024873332c3a08b

Zero detected.  Notice how mine even shows it going to the file linked by the OPs page...not to the unnamed virus file you are showing. :

http://gminer.pro/downloads?res=gminer_2_74_linux64.tar.xz
gminer.pro

Your link shows this:


95c227fb11899a504e21e5082646bf566a14d513ef98e8ca0f795d9d13ebc799
miner


See the difference...you did not get the file you checked off the official site.

Plain and simple ... with proof.

[coinmentos]

Hello GMiner devs

I have this issue. I was with fedora 33 OS and have used gminer 2.70 version without any problem. But i decided to upgrade to the latest distro fedora 35 .  I also upgraded to the latest Nvidia drivers at the time of OS upgrading.

After the upgrade my Gminer doesn't work and when start it shows this

"Miner terminated, watchdog will restart process after 10 seconds"


I decided to download the latest Gminer version 2.74 but when I check it with virustotal it shows that has viruses malware  ( the version 2.70 and bellow didn't have this issue ) so I didn't dare to use it.
( https://www.virustotal.com/gui/file/95c227fb11899a504e21e5082646bf566a14d513ef98e8ca0f795d9d13ebc799 )

So my question is - what could be the problem with 2.70 version and is this a reported issue already .. how to manage with that problem?

Just to inform that my GPUS (NVIDIA GTX 1070 ) works OK with Phoenixminer but for some reason they stopped to work with Gminer after the upgrade.

Did you go to the first post of this thread and download from the link provided by OP?
If you did then both linux and windows 2.74 show ZERO on virustotal.
You can go check yourself.  I just did both.

You most likely got them from a malware site because the files on the offical OP site are clean.

Be careful and always got to the OPs listed D/L site….nowhere else for miner software.

Thanks for you reply.
I downloaded Gminer from the official github repository - and if you check the linux version it has been detected as malware by some of the soft on Virustotal  - check the link in my  first post. ( unzip the archive and check "miner" file for linux version )

Something isnt right with your first link...

Here is the current link of 2.74 from OPs 1st post link

https://www.virustotal.com/gui/url/a54e1fd622482186c96034c4c1a2a8ece0839624baaf716e9024873332c3a08b

Zero detected.  Notice how mine even shows it going to the file linked by the OPs page...not to the unnamed virus file you are showing. :

http://gminer.pro/downloads?res=gminer_2_74_linux64.tar.xz
gminer.pro

Your link shows this:


95c227fb11899a504e21e5082646bf566a14d513ef98e8ca0f795d9d13ebc799
miner


See the difference...you did not get the file you checked off the official site.

Plain and simple ... with proof.

You don't read my post carefully!!!!!!!!

Please don't upload the whole gminer_2_74_linux64.tar.xz to Virustotal in order to be checked for viruses but ONLY 'miner' FILE - it is the real one executable file that starts on the pc, all other files are just txt files with bash comands!
Virustotal will not detect anything in the archive file!!! BUT if you check the files inside gminer_2_74_linux64.tar.xz you will find the 'miner' file it  is executed when you start the mining procedure - this file is 'miner' - THE LINK I PROVIDE HERE WITH MY FIRST POST SHOWS THE RESULTS EXACT FOR THIS FILE WHICH IS INSIDE THE ARCHIVE  gminer_2_74_linux64.tar.xz!!!
'Plain and simple ... with proof.' - FOR WHAT PROOF ARE YOU TALKING ABOUT?

DID YOU CHECK THIS FILE 'MINER' ?  DO YOU KNOW THIS FILE IS INSIDE gminer_2_74_linux64.tar.xz ARCHIVE? OPEN IT! SEE IT! CHECK IT WITH VIRUSTOTAL AND SHOW US THE RESULT PLEASE!

And please if you can't help me with the problem I explained in my first post just stop to reply me. There is no sense .. I don't want to insult you but you event don't know how to check this for viruses. Really sorry for that but I'm sure we all don't have time to argue about nonsense.

I'm waiting and will be grateful for an answer from the real gminer dev or from a person with knowledge experiencing  the same problem explained by me in my first post.

Thanks in advance.

[miner29]

Hello GMiner devs

I have this issue. I was with fedora 33 OS and have used gminer 2.70 version without any problem. But i decided to upgrade to the latest distro fedora 35 .  I also upgraded to the latest Nvidia drivers at the time of OS upgrading.

After the upgrade my Gminer doesn't work and when start it shows this

"Miner terminated, watchdog will restart process after 10 seconds"


I decided to download the latest Gminer version 2.74 but when I check it with virustotal it shows that has viruses malware  ( the version 2.70 and bellow didn't have this issue ) so I didn't dare to use it.
( https://www.virustotal.com/gui/file/95c227fb11899a504e21e5082646bf566a14d513ef98e8ca0f795d9d13ebc799 )

So my question is - what could be the problem with 2.70 version and is this a reported issue already .. how to manage with that problem?

Just to inform that my GPUS (NVIDIA GTX 1070 ) works OK with Phoenixminer but for some reason they stopped to work with Gminer after the upgrade.

Did you go to the first post of this thread and download from the link provided by OP?
If you did then both linux and windows 2.74 show ZERO on virustotal.
You can go check yourself.  I just did both.

You most likely got them from a malware site because the files on the offical OP site are clean.

Be careful and always got to the OPs listed D/L site….nowhere else for miner software.

Thanks for you reply.
I downloaded Gminer from the official github repository - and if you check the linux version it has been detected as malware by some of the soft on Virustotal  - check the link in my  first post. ( unzip the archive and check "miner" file for linux version )

Something isnt right with your first link...

Here is the current link of 2.74 from OPs 1st post link

https://www.virustotal.com/gui/url/a54e1fd622482186c96034c4c1a2a8ece0839624baaf716e9024873332c3a08b

Zero detected.  Notice how mine even shows it going to the file linked by the OPs page...not to the unnamed virus file you are showing. :

http://gminer.pro/downloads?res=gminer_2_74_linux64.tar.xz
gminer.pro

Your link shows this:


95c227fb11899a504e21e5082646bf566a14d513ef98e8ca0f795d9d13ebc799
miner


See the difference...you did not get the file you checked off the official site.

Plain and simple ... with proof.

You don't read my post carefully!!!!!!!!

Please don't upload the whole gminer_2_74_linux64.tar.xz to Virustotal in order to be checked for viruses but ONLY 'miner' FILE - it is the real one executable file that starts on the pc, all other files are just txt files with bash comands!
Virustotal will not detect anything in the archive file!!! BUT if you check the files inside gminer_2_74_linux64.tar.xz you will find the 'miner' file it  is executed when you start the mining procedure - this file is 'miner' - THE LINK I PROVIDE HERE WITH MY FIRST POST SHOWS THE RESULTS EXACT FOR THIS FILE WHICH IS INSIDE THE ARCHIVE  gminer_2_74_linux64.tar.xz!!!
'Plain and simple ... with proof.' - FOR WHAT PROOF ARE YOU TALKING ABOUT?

DID YOU CHECK THIS FILE 'MINER' ?  DO YOU KNOW THIS FILE IS INSIDE gminer_2_74_linux64.tar.xz ARCHIVE? OPEN IT! SEE IT! CHECK IT WITH VIRUSTOTAL AND SHOW US THE RESULT PLEASE!

And please if you can't help me with the problem I explained in my first post just stop to reply me. There is no sense .. I don't want to insult you but you event don't know how to check this for viruses. Really sorry for that but I'm sure we all don't have time to argue about nonsense.

I'm waiting and will be grateful for an answer from the real gminer dev or from a person with knowledge experiencing  the same problem explained by me in my first post.

Thanks in advance.

You are correct i didnt read the whole inital message.

The problem appears to be in your OS upgrade...because under ubuntu i am able to currently run 2.61 - 2.74 each version on 1070 rig no issue.
Maybe roll back to 33 and keep using 2.70.   Or stay on PM. 

+1 merit for you for misreading you original post and being pleasant about it

[coinmentos]

You are correct i didnt read the whole inital message.

The problem appears to be in your OS upgrade...because under ubuntu i am able to currently run 2.61 - 2.74 each version on 1070 rig no issue.
Maybe roll back to 33 and keep using 2.70.   Or stay on PM. 

+1 merit for you for misreading you original post and being pleasant about it

  np, everything is ok

I'm under fedora, all seems to work just perfect ( I mean new drivers NVIDIA-SMI 495.44       Driver Version: 470.86  and CUDA ) . I really like Gminer it will be a pity to leave it after having worked with it for so long without any problems.

OK thanks anyway, I will continue to investigate the problem!

[Tiggz]

Hello,

I'm new to using Gminer. I used the DL link from Github directly from this forum. I successfully ran the program on 2 rigs starting about 4 days ago. When I went to get it again for my main rig it came up with a warning Trojan:Win32/TrickBot!ml and the infected file was the miner.exe. Is this normal? It didn't pop up on the other 2 downloads from a couple days ago. Just wondering what I should do? Thanks!