GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[alleway]

"illegal access of memory encountered" on cuckatoo32 v2.09 version. was working fine all along but error suddenly started since yesterday. tried previous versions but still the same. on nicehash and using 1080ti. anyone facing the same issue?

[Wotan Wipeout]

Try powerlimit 180 - 200 Watt. Should solve it.

[alleway]

Try powerlimit 180 - 200 Watt. Should solve it.

my 1080tis are all in 70% power limit. no oc settings were changed for the past mth. eeror message shows up randomly on diff gpu. happened only yesterday.  my 2080ti have no such issue

[Kringel]

Are there OC1 kernels for anything besides BeamHashII?

[Maliki2]

Just put 3 5500 xts into my rig. Getting a unable to load binary kernel message for those three only. The other cards are fine. Any ideas?

[realbowler]

Any plan to add support for c31 EpicCash?

[davidzai]

Hi, anyone of you using SMOS with gminer to mine Ravencoin (Kawpow)?

What is the pers of this coin? I tried to put auto but it doesn't work.

[Wotan Wipeout]

The fastest miner (KawPow) for me is T-Rex.
At Nicehash -pers is not needed.

[jasta more]

The fastest miner (KawPow) for me is T-Rex.
At Nicehash -pers is not needed.

all depends on what gpus you have

[shamon136245]

Hello
How to use a proxy?
Ethminer software training available
But there is no training for this software ...

Please teach me how to put a proxy

[davidzai]

The fastest miner (KawPow) for me is T-Rex.
At Nicehash -pers is not needed.

all depends on what gpus you have

I am using Nvidia Graphic cards

[Wotan Wipeout]

@davidzai

Please dont expect a good answer when you give like 1% infos.

I tested 4 Miners for KawPow with my 2080.
Gminer - T-Rex - NBminer and Enemy.
     2 % -  1%!  -     2%      -      1%!   Fee

Some pools might need the -pers, some dont.
For a test to see if all is ok, you can try Nicehash to your BTC adress.

Get T-Rex Miner

-a kawpow -o kawpow.eu.nicehash.com:3385 -u BTC-Adress.KawPow

In case this works, you can go further.

The latest Z-Enemy is well done too, starting 1% more hash than T-Rex, equal over time. (just checked it)

I dont know you GPUs, so i cant estimate your hashrate.
1 Rig with 5 x 2080 does 130 Mhash/s, Kawpow, for around 800 Watt.

In the case KawPow runs to hot on your GPUs, you can try GrinC32.
1 Rig with 5 x 2080 does 2.8 H/s, GrinC32, for around 800 Watt.

Use whattomine to calculate the profit and dont forget to fill in you electric costs.

 

[davidzai]

@davidzai

Please dont expect a good answer when you give like 1% infos.

I tested 4 Miners for KawPow with my 2080.
Gminer - T-Rex - NBminer and Enemy.
     2 % -  1%!  -     2%      -      1%!   Fee

Some pools might need the -pers, some dont.
For a test to see if all is ok, you can try Nicehash to your BTC adress.

Get T-Rex Miner

-a kawpow -o kawpow.eu.nicehash.com:3385 -u BTC-Adress.KawPow

In case this works, you can go further.

The latest Z-Enemy is well done too, starting 1% more hash than T-Rex, equal over time. (just checked it)

I dont know you GPUs, so i cant estimate your hashrate.
1 Rig with 5 x 2080 does 130 Mhash/s, Kawpow, for around 800 Watt.

In the case KawPow runs to hot on your GPUs, you can try GrinC32.
1 Rig with 5 x 2080 does 2.8 H/s, GrinC32, for around 800 Watt.

Use whattomine to calculate the profit and dont forget to fill in you electric costs.

 

Thank you for the info given.

I rig is running GTX1070ti x 6 using SMOS. Currently using Kawpowminer V1.2.3-cuda10.2.

 -P stratum+tcp://user.worker@server:port --api-port 3333

But If I want to use gminer. It request me to give the below info

--algo xxx --pers xxx --server xxx --port xxx --user xxx --pass x --api 3333

But I tried --pers auto cannot and I tried to remove --pers also cannot.

[Dr_Victor]

gminer anti hacking system detected modification of the miner memory

gminer 2.09
          version 2.07 work well

w 7  latest nvidia driver

it was few days ago, reinstaled nvidia driver and worked untill now , when  get again error

gminer anti hacking system detected modification of the miner memory
, 

any suggest?

change version

[Agent009]

Hello Zminer777

Why on nvidia 446.14 drivers GRIN29 hashrate so small?
Only 5.59 h/s on msi 1080ti

I remember on the old version of gminer and nvidia drivers 416-417 version grin29 hashrate was about 7.00+ h/s

What happened?

[mo35]

please get it up on par with latest nvidia drivers , last working version i found is 446.14 , there is already 451.22 out , and with windoze 2004 update its kinda needed to get driver versions up to date.

[Zminer777]

GMiner v2.10 available for download

v2.10
+ major performance improvements for qitmeer (+20%)
+ fixed compatibility with latest nvidia drivers (fixed "no device found" error)

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
GitHub: https://github.com/develsoftware/GMinerRelease/releases/tag/2.10

[TrashSeller]

Code:

18:40:54 Uptime: 0d 00:02:00 Electricity: 0.030kWh
18:40:55 All devfee mining pools are unavailable
18:40:58 Stopped Mining on GPU0
18:41:00 Stopped Mining on GPU1
18:41:02 Stopped Mining on GPU2
18:41:05 Stopped Mining on GPU3
18:41:08 Stopped Mining on GPU4
18:41:08 Miner terminated, watchdog will restart process after 10 seconds
+----------------------------------------------------------------+
|                          GMiner v2.10                          |
+----------------------------------------------------------------+
Algorithm:          Cuckatoo32
DevFee:             3%
Stratum server #1:
host:             grincuckatoo32.eu.nicehash.com:3383

such an error in two out of three rigs, appears every 2-3 minutes, what's the matter?

[Arthur38]

Will Gminer be ready for Grin third hard fork (https://github.com/mimblewimble/grin/pull/3334)? It's in a month (around July 15) at block 786,240.

Thanks!

[peter_dab]

Hi There,

I'm trying to mine Equihash 150,5 but the miner (2.10) is always restarting stating that "All devfee pools are unavailable". Can you please update (maybe with a new version) your devfee pools so that the miner works again

Thanks in advance.