【BOT】 🌟 C.A.T. Cryptocurrency Automatic Trader 🌟 (New Price List 04/2021)

[RenHoek]

by adding new Features pls do not Forget this :

Hi Sampey,

i want to suggest a quick enhancement for 2.8 :

pls add "dont Buy over your last Buy Price" and " Dont Sell under your Last Sell Price".
(This should be a easy enhancement´, becouse the Reverenz Price is allready the same as for "dont buy/sell over last sell/buy Price")

Reason is : U can set "dont buy over last buy Price" at top of a pumped coin, without danger to go over all.
                 U can set "dont sell under your last sell Price" at bottom of a dumped coin without danger to go under all.
...and so u will not miss the first shoot as with "never buy/sell over X" and there is no danger to get out within a spike,
 becouse  there is now a semi automatic lowering/highering of your bets/asks!

... if possible: to make all " dont ... last ...Price" more comfortable, there would be helpfull a reset option for the Reverence price.


Cheers

[1714926194]

1714926194

[mer2329]

how do i make it so orders are not made if the trade is worth less than say 1 xpy (or another altcoin based on the market)

also how do i reduce a order by the last trade profits (damn dislexia, i cant express it right) okay a hypothetical scenario instead (all numbers are just examples)
a ping pong just completed in market btc/ltc with a sell as a start. with a total order of 3.3 ltc
i want to set the profits aside for other/new markets based on the original order value
the profits were .0003 or 12.5%
i now want to start a new order with a reduction in price of .0003 (the 12.5 %)

im sure you know by now that the cryptsy fee is now based on your trade volume. can you make it so CAT can calculate this
on cryptsy some accounts have no trade fee as well

can you add the following feature
keyboard shortcuts (or better yet customizable keyboard shortcuts)
for example
F5 to "Update Parameters (Current Market)"
F6 = "validate status parameter (current market)"
alt+F6 to "validate status parameter (all markets, Current exchange)"
y = activate yes Button on prompt
n = activate No button on prompt

[Sampey]

I will try to add some suggested features.
I usually take user suggestions into a Todo List, so if you request will not be added in the next version, it could be added in a future one 

[ewibit]

Hi CAT users.
In the next days i will start to add some features to CAT 2.9

Quote from: darkstaticfire on December 29, 2014, 12:45:08 AM
What is the easiest way to restart C.A.T. when my PC crashes? I loaded the save file, but restarting them all leads to the zombie state. The only thing I've found to work is to cancel all orders manually and restart them... but that is quite a pain.

Thanks
There should be a button to (re-)load ALL open orders from the Market Explorer with one click to restore  Smiley
 

Quote from: cryptonit on February 25, 2015, 10:52:22 PM
any plans for cross market functions on same exchange?

example

DMD/BTC
DMD/XRP
XRP/BTC

http://preview.whyte.de/index.php?page=performance

[megaplage]

Error Report :

If Option "never buy over your last sell price" is activated and the first ping buy is created the Price will never be adjusted :

2015-03-28 14:28:01| PING-99c7194b-ab45-4f13-a8e9-10c766824812 : BUY 192.96635482@0.00051627 Current 192.96635482 | Check For Recalculation
2015-03-28 14:28:01| PPC(REC-BUY-PI) : Never BUY Over Last Sell Price : 0.00000000 price calculated is 0.00052008
2015-03-28 14:28:01| PING-99c7194b-ab45-4f13-a8e9-10c766824812 : BUY 192.96635482@0.00051627 Current 192.96635482 | Order Status Not Changed No Condition

Maybe the same for ping sells ...

[Sampey]

This problem is fixed in 2.9

[juve4v]

Any news on 2.9 release? Poloniex APi keys still not working in 2.8, and the looong wait is looooong  waiting for a fix in order to trade back there

[Sampey]

Any news on 2.9 release? Poloniex APi keys still not working in 2.8, and the looong wait is looooong  waiting for a fix in order to trade back there

Problems on Api key are not CAT's fault.
Something happens on some users API Key, this is a Poloniex problem.
I have fixed it in 2.9, but no Eta on release, sorry.

[cintrondigital]

I mentioned to Sampey via PM that he should look into Yobit and C-Cex. I have a group that chases new altcoins and some of us use CAT. We normally have to wait for Bittrex to add them before we could use the bot to trade. Lately Yobit and C-Cex have been actively adding new coins. I think it would be a good idea. Let me know your thoughts. 

[cryptcollector]

Well i have to say.... THANK YOU FOR A FANTASTIC PROGRAM... 

in the first two days of getting this I have already made profit...
Okay, its not alot of profit as yet because im getting to grips with it, but.... at least its not a loss.

Great work Sampey.
First trading software I've had that works well.
Only useing Cryptsy and BTC-e API's just now, and they work well.
Cryptsy is a bit slow, but then Cryptsy is always a bit slow lol.... Not the appication's fault.

Look forward to more features in the future.


Cryptcollector at your service :-)

[anp31]

does bot supports coinbase exchange?

[mer2329]

does bot supports coinbase exchange?

im not samepy, but no it does not support coinbase, besides the coinbase exchange is not up and running yet (the basic buy sell orders are working but not the full exchange)
heres all the exchanges it supports and their prices
https://i.imgur.com/dyxz61z.png
if your not a cat owner you would need cat core and your exchange(s)
pricing works as follows
buy the base program and then add your exchanges (see graphic above for price list)
ie.
core + cryptsy + BTCe = BTC0.6 + BTC.2 + BTC.1 = BTC.9
for existing users buying cryptsy and btce = BTC.2 + BTC.1 = BTC.3

in all honesty i doubt sampey will support coinbase as they only support 1  pair USD/btc
plus you MUST be a resident in the USA to use coinbase.
all other exchanges supported have many pairs, for example cryptsy has over 400 pairs
all the exchanges i use dont have any location restrictions.

[cryptcollector]

Hi, I was just wondering if anyone else might think that an option to retrieve your deposit addresses from the exchanges your using might be a good idea.

Might be worth a thought Sampey, save us all going directly to the exchange when sending coin to them just to get the address to send to.

Now I know most of us probably have these in our wallet send addresses, but if your using a daemon style wallet it gets irritating, I'm lazy :-)
I keep meaning to create a script that will do this stuff for me at the prompt but never get around to it.

Cryptcollector

[mer2329]

i keep my deposit addresses in a spreadsheet
heres a sample of my file

exchange	coin name	coin code	address
Cryptsy	Bitcoin	BTC	13DohkwygfWetQ6V8tfGYWexHfKBd8CXnF

my only problem is generating the addresses, as on most exchanges that takes hours

[PaidFudder]

tltr

[mer2329]

i have some suggestions:
i would like the ability to "restore all orders (allmarket+onlysite)" in the "market global actions" (useful for when cat or my computer crashes)
i would also like the ability to clear the trade log (maybe also in the market global actions)
also can you make the "market global actions" list scroll
also i would like to set change the default parameters to a custom setting without the need to utilize a market save

[cryptcollector]

just a query to all out there using C.A.T, has anyone managed to get C.A.T to run on a raspberry Pi?

the built in java on the Pi does not seem to be compatible. Sorry if this has been asked before, I'll go take a look throughout the thread in any case just in case.

I'm going to try the Java Embedded from Oracle and see if I can get it to work.

btw, I seem to have C.A.T locking up on me on Windows, the GUI becomes so sluggish it becomes unusable. not sure if there is a solution to this. I know it cant be memory related as i have 32Gb of ram in my system and its an i7 Quad core CPU, I'm running the latest Java mins. In any case it does seem to be running okay for a day or so non stop on the Windows desktop.

Cryptcollector

[EDIT]
Snip!.... err! Doh! I just needed to use the -jar switch on the RPi LOL...

Sorry, must go put my head through a wringer now.... :-/

[cintrondigital]

You got a monster system. It shouldnt be locking up on you.

[mer2329]

just a query to all out there using C.A.T, has anyone managed to get C.A.T to run on a raspberry Pi?

the built in java on the Pi does not seem to be compatible. Sorry if this has been asked before, I'll go take a look throughout the thread in any case just in case.

I'm going to try the Java Embedded from Oracle and see if I can get it to work.

btw, I seem to have C.A.T locking up on me on Windows, the GUI becomes so sluggish it becomes unusable. not sure if there is a solution to this. I know it cant be memory related as i have 32Gb of ram in my system and its an i7 Quad core CPU, I'm running the latest Java mins. In any case it does seem to be running okay for a day or so non stop on the Windows desktop.

Cryptcollector

[EDIT]
Snip!.... err! Doh! I just needed to use the -jar switch on the RPi LOL...

Sorry, must go put my head through a wringer now.... :-/

yes, i had it working on a overclocked model b, (not a b+ or the new a pi 2)
i recommend using it on a pi 2 (as the pi b or b+ will be extremely SLOW, and may lock up on you)
follow my directions here (meant for the pi model B) https://sites.google.com/site/kitty314159/
please note that this guide is not all inclusive it does however show you a basic setup
it includes installing the distro, compiling unrar, and installing oracle java

i would also like some feedback on the guide, with any improvements i should add, or any changes i should make

[agent932]

I am selling my C.A.T. license i have Cryptsy + Bitfinex open to offers PM please