s1gs3gv
Legendary
Offline
Activity: 1316
Merit: 1014
ex uno plures
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 06:32:55 PM |
|
Speaking of overclocking, the S2 seems to be happy @ 225mhs. I swapped out the Enermax for an EVGA 1300 I already had, added an entry in /config/asic-freq.config for 225mhz and am now running at an average of between 1.1 - 1.14 TH with a chip temperature increase of ~ 2-4 degrees. WU has gone from just over 14K to just under 16K.
I want to let this run a while before I try for 1.2TH
// edit: I am seeing apparently very high rejects @ 1.1+
|
|
|
|
dlowings
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 06:33:17 PM |
|
Did Bitmain take a walk off the deep end ? Did they go full retard on the price ? Not only is their kit roughly the same price as the full unit use to be, the full unit is now TOTALY overpriced more then it originally was …
This folks is what FULL RETARD looks like …..
|
BTC donations welcome:- 1BrersvQubEKt4m2hBXDNvU1B4RiYe6J4i - Feel free to visit wiki.chainminer.com for free hardware listings, and mining info. - IRC on freenode #wiki.chainminer.com
|
|
|
dlowings
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 06:34:56 PM |
|
There was a big conference of chinese mining manufactures. Im sure they discussed fixing prices to maximize profit.
This is part of their culture, "sadly" CLEAR case of demonstrating that its all about the dollars and less about the consumer .
|
BTC donations welcome:- 1BrersvQubEKt4m2hBXDNvU1B4RiYe6J4i - Feel free to visit wiki.chainminer.com for free hardware listings, and mining info. - IRC on freenode #wiki.chainminer.com
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 06:51:08 PM Last edit: May 31, 2014, 07:05:11 PM by dogie |
|
There was a big conference of chinese mining manufactures. Im sure they discussed fixing prices to maximize profit.
This is part of their culture, "sadly" CLEAR case of demonstrating that its all about the dollars and less about the consumer . Remember everyone sold their $400 good will vouchers so you can buy these at $1860 essentially. Edit: 3k posts
|
|
|
|
Biodom
Legendary
Offline
Activity: 3864
Merit: 4235
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 06:54:28 PM |
|
Speaking of overclocking, the S2 seems to be happy @ 225mhs. I swapped out the Enermax for an EVGA 1300 I already had, added an entry in /config/asic-freq.config for 225mhz and am now running at an average of between 1.1 - 1.14 TH with a chip temperature increase of ~ 2 degrees. WU has gone from just over 14K to just under 16K.
I want to let this run a while before I try for 1.2TH
what code and timeout values did you use? can you post or provide a link to. Much thanks, I've got evga 1300 and might give it a shot. My machine seems to already overheat periodically at default settings, though. I also noticed that once fans speed goes up, hashing goes down, which is reasonable as enermax has to use more power to fans, hence less for hashing, at least this is what I thought. I was thinking of getting a "naked" kit (not at $2260), then don't even use the default fans and instead use a couple of powerful fans like Vornado to cool the boards, perhaps make a simple wind tunnel. It just might work.
|
|
|
|
kendog77
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 06:57:05 PM |
|
There was a big conference of chinese mining manufactures. Im sure they discussed fixing prices to maximize profit.
This is part of their culture, "sadly" CLEAR case of demonstrating that its all about the dollars and less about the consumer . Remember everyone sold their $400 good will vouchers so you can buy these at $1860 essentially. I think most, if not all of the $400 coupons are now expired. $2260 is a steep price to pay for a 1TH mining kit without a case or PSU.
|
|
|
|
PsychoticBoy
Donator
Legendary
Offline
Activity: 1890
Merit: 1010
Parental Advisory Explicit Content
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 07:05:55 PM |
|
YUP ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Instead of improving their design, they just removed the case and made it an even worse miner ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Datacenters will not be very impressed with those miners in their Racks ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) I graded Bitmain 8 out of 10 but now they will nearly get a 6. Keep up the Ughhhum Great work and you will end up like KNC.
|
|
|
|
s1gs3gv
Legendary
Offline
Activity: 1316
Merit: 1014
ex uno plures
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 07:07:13 PM |
|
I think most, if not all of the $400 coupons are now expired. $2260 is a steep price to pay for a 1TH mining kit without a case or PSU.
They are obviously selling off their remaining stock of parts before introducing the S3.
|
|
|
|
samsonn25
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 07:08:28 PM |
|
There was a big conference of chinese mining manufactures. Im sure they discussed fixing prices to maximize profit.
This is part of their culture, "sadly" CLEAR case of demonstrating that its all about the dollars and less about the consumer . YES
|
|
|
|
s1gs3gv
Legendary
Offline
Activity: 1316
Merit: 1014
ex uno plures
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 07:12:32 PM |
|
Speaking of overclocking, the S2 seems to be happy @ 225mhs. I swapped out the Enermax for an EVGA 1300 I already had, added an entry in /config/asic-freq.config for 225mhz and am now running at an average of between 1.1 - 1.14 TH with a chip temperature increase of ~ 2 degrees. WU has gone from just over 14K to just under 16K.
I want to let this run a while before I try for 1.2TH
what code and timeout values did you use? can you post or provide a link to. Much thanks, I've got evga 1300 and might give it a shot. My machine seems to already overheat periodically at default settings, though. I also noticed that once fans speed goes up, hashing goes down, which is reasonable as enermax has to use more power to fans, hence less for hashing, at least this is what I thought. I was thinking of getting a "naked" kit (not at $2260), then don't even use the default fans and instead use a couple of powerful fans like Vornado to cool the boards, perhaps make a simple wind tunnel. It just might work. 0881 and 65 It is unclear to me the role that the timeout value plays in the calculations, so 65 was just copied from an adjacent entry. It may not be correct for 225mhs. I started seeing very high rejects and errors so I'm back at 196 for now … YMMV
|
|
|
|
jelin1984
Legendary
Offline
Activity: 2408
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 07:13:13 PM |
|
I sell s2 coupon pm me
|
|
|
|
samsonn25
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 07:17:57 PM |
|
More like .78 from June 1, to July 1. assume 15% rise jumps and .15/kw electricity
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 07:19:34 PM |
|
they must preparing something new as Bitmain no longer has the S2 complete They should offer a all in one miner for the not so experienced miners. 55nm is old tech must be something new the good thing is that they never stop to surprise us either with the price or product
This kit is just badly priced. If Bitmain priced it reasonably (about $1500) it would probably sell. Considering that they save significant money on the costs of a case, asembly time, and the size/weight of the shipping package, it must cost about $200 less than the S2 did. really looking forwards to the next gen, since i feel these kits could do very well with a 28nm chip. The current prices of both the S1 and S2 kit are out of whack with reality and the SP10 units are becoming a better GH/$ and GH/W
|
|
|
|
kendog77
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 07:29:59 PM |
|
they must preparing something new as Bitmain no longer has the S2 complete They should offer a all in one miner for the not so experienced miners. 55nm is old tech must be something new the good thing is that they never stop to surprise us either with the price or product
This kit is just badly priced. If Bitmain priced it reasonably (about $1500) it would probably sell. Considering that they save significant money on the costs of a case, asembly time, and the size/weight of the shipping package, it must cost about $200 less than the S2 did. really looking forwards to the next gen, since i feel these kits could do very well with a 28nm chip. The current prices of both the S1 and S2 kit are out of whack with reality and the SP10 units are becoming a better GH/$ and GH/W Agreed. The main downside of the SP10 is noise, but if one can deal with that, the SP10 is now a far better buy than the S2 kit priced at $2260.
|
|
|
|
s1gs3gv
Legendary
Offline
Activity: 1316
Merit: 1014
ex uno plures
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 07:39:22 PM |
|
S2 was not a bad deal at the group buy price of 1650.
|
|
|
|
kendog77
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 07:44:00 PM |
|
S2 was not a bad deal at the group buy price of 1650.
I hindsight, the $1650 S2 group buy was a great deal. I managed to pick up a few units.
|
|
|
|
NorTiaN
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 97
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 07:45:35 PM |
|
WTF? They'r selling DIY kits now??? They want to become what? Datacenter exclusive???
|
|
|
|
nottm28
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 07:49:44 PM |
|
S2 was not a bad deal at the group buy price of 1650.
I hindsight, the $1650 S2 group buy was a great deal. I managed to pick up a few units. Yeah missed that GB - looking at the SP10... 4.8115 BTC (which includes shipping) for 1.4 TH/s Still too high for ROI. Stuck between a rock and a hard place - sit on the coins.
|
donations not accepted
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 07:51:01 PM |
|
S2 was not a bad deal at the group buy price of 1650.
I hindsight, the $1650 S2 group buy was a great deal. I managed to pick up a few units. Yeah missed that GB - looking at the SP10... 4.8115 BTC (which includes shipping) for 1.4 TH/s Still too high for ROI. Stuck between a rock and a hard place - sit on the coins. What price would please you for an SP10?
|
|
|
|
nottm28
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2014, 07:53:53 PM |
|
S2 was not a bad deal at the group buy price of 1650.
I hindsight, the $1650 S2 group buy was a great deal. I managed to pick up a few units. Yeah missed that GB - looking at the SP10... 4.8115 BTC (which includes shipping) for 1.4 TH/s Still too high for ROI. Stuck between a rock and a hard place - sit on the coins. What price would please you for an SP10? I'd jump in for 4 BTC (including shipping).
|
donations not accepted
|
|
|
|