[UNO] Unobtanium Info & Discussion - Merge Mine w/BTC! - Update NOW to qt 0.11.5

[sirsmokesalot]

Did someone send out an email to EVERYONE

Just so you know, that is ridiculous. There are a ton of reasons that make it so. The largest being there is no email requirement to get involved with Uno.

You seem VERY confused on unregulated markets. Unregulated means buyer beware, or use at your own risk. No one owes you anything and catching an attitude will often turn others off.

I doubt you are that confused. You came in acting like a dick, asked a question you already knew the answer to, and then it is all about the point of things, you have nothing invested in this anyway.

Why, i do reckon, that is trolling at it's finest!

Of course the update could have been rolled out better. It wasn't though, so? So nothing, exactly. Either you are part of the solution or you are part of the problem ;P I don't think anyone in the community is so pig headed to think that this was a smashing success. All things considered it really wasn't that bad either. Things are being worked on. For a coin without a foster dev it could be much worse.

[FallingKnife]

Auto update sounds great to me.

Keep your eyes out for good, trustworthy devs who would like to share their skills with Unobtanium, and in the process gain our admiration and the cred of working on a long lived, respected, vetted fair launch crypto with a decent marketcap, which gets media attention, backed by an awesome community, and a great story. If you are such a dev, PM me.

I am sticking with it for the long haul, especially due to the correlation with physical metals. I fully intend to build the majority of my projects on top of UNO.

Awesome!!

[FallingKnife]

Uno is moving in the right direction.  

[BitcoinCharlie]

Of course the update could have been rolled out better. It wasn't though, so? So nothing, exactly. Either you are part of the solution or you are part of the problem ;P I don't think anyone in the community is so pig headed to think that this was a smashing success. All things considered it really wasn't that bad either. Things are being worked on. For a coin without a foster dev it could be much worse.

I agree the rollout could have gone better. However, this experience highlights the strength and resilience of this community. All who could chipped in for solutions.  Also, throughout this exercise, I've been waiting for the $UNO price to crash (which, by the by, would have happened in 99.999% of other cryptos) so that I could load up on some more cheap $UNO. Alas, I've been disappointed that I haven't been able to pick up cheap $UNO. However, I've been delighted in the community performance and stability!

[IMZ]

"However, this experience highlights the strength and resilience of this community."

Element6, welcome! (Woo hoo -- another Australian. We've talked on the phone. He's an Uno miner.)

Got a little time for The China Outreach Program? Great!

IMZ Mark

[mmpool]

Block time on P2Pool passed 3 days, killing my node.

Is that with the mmpool version?

It's due to the high difficulty of Uno now. Block finds will be measured in days unless you have multiple Th/s I suspect.

[siameze]

Are there any users in this thread who use irc? It would be nice to bounce project ideas with some of you in real time.

[BitcoinCharlie]

Are there any users in this thread who use irc? It would be nice to bounce project ideas with some of you in real time.

I can be on IRC, just need to know when the get together is....

[siameze]

Are there any users in this thread who use irc? It would be nice to bounce project ideas with some of you in real time.

I can be on IRC, just need to know when the get together is....

Server: irc.hashbang.sh    SSL is required, so 6697 (No freenode noobiness here)

Channel is of course #UNO

[IMZ]

Are there any users in this thread who use irc? It would be nice to bounce project ideas with some of you in real time.

I can be on IRC, just need to know when the get together is....

Server: irc.hashbang.sh    SSL is required, so 6697 (No freenode noobiness here)

Channel is of course #UNO

Go, Siameze and Bitcoin Charlie! Just (finally, this very second) managed to sign up for Keybase. IRC 101 is next.

IMZ Mark

[siameze]

Are there any users in this thread who use irc? It would be nice to bounce project ideas with some of you in real time.

I can be on IRC, just need to know when the get together is....

Server: irc.hashbang.sh    SSL is required, so 6697 (No freenode noobiness here)

Channel is of course #UNO

Go, Siameze and Bitcoin Charlie! Just (finally, this very second) managed to sign up for Keybase. IRC 101 is next.

IMZ Mark

@IMZ Let me know if you need a web client for IRC. This server is a very good place to learn about all those things.

EDIT: Webclient added: http://ny1.hashbang.sh:7778/

Just a quick-n-dirty kiwi, but it should get us all talking on the same page.

[IMZ]

@ Siameze: oh, I will willingly accept all assistance with all things technical!

Uno Cryptsy wallet -- under maintenance at this second

[siameze]

@ Siameze: oh, I will willingly accept all assistance with all things technical!

Uno Cryptsy wallet -- under maintenance at this second

Hopefully it is only down because they are perforing the uprgade/patch

[not altcoin hitler]

This coin 80$+

[TrevorS]

@MMpool

Is there any prospect for my being able to connect more than one Antminer S5 to your pool?  I've had to shut down four of the six S3 (getting too warm in here) and would really like to redirect another three S5.  What is necessary in order to accomplish this?  If you need to observe server behavior with them, then let's arrange for that!

Thanks -- Trevor

PS. After over two days of uninterrupted mining on MMpool, the single S5 reports an A/R ratio of 612, so it's not an inherent miner problem.  Why do the A/R ratios collapse with more than one S5 connected to your pool?  Would really like to solve this problem!  How about you?

@MMpool

Thought I'd try increasing the Antminer S5 count again, using this configuration:
stratum+tcp://mmpool.org:3333
<pool user ID>
d=512

Just one was running fine, so added a second.  Rejects increased some over a half hour period.  Added a third and within ten minutes the A/R ratio on the new arrival was 1.8 which is very poor (at about 30min it was 1.4).  Can anything be done to fix this?

PS. Am now dropping back to just two S5 again, restarted both at the same time.  After ~15 minutes their respective A/R ratios are 11.1 and 1.8, I obviously have to drop back to one S5 again.

PPS. I've noticed the rejects don't show up singly, but in bursts.  Looks like a timing problem to me.

PPPS. Thought I'd list the A/R ratios for the six Antminer S3: 519, 535, 586, 626, 421, 266 (am rebooting this last one)

------------------------------------------------------------------------------------------------------------------

Been over an hour now since returning the second two S5 to Eligius.  Vari-diff has set 512 for both and their A/R ratios are: 551 and 1389 -- it's not a miner hardware problem.

[siameze]

@MMpool

Is there any prospect for my being able to connect more than one Antminer S5 to your pool?  I've had to shut down four of the six S3 (getting too warm in here) and would really like to redirect another three S5.  What is necessary in order to accomplish this?  If you need to observe server behavior with them, then let's arrange for that!

Thanks -- Trevor

@MMpool

Thought I'd try increasing the Antminer S5 count again, using this configuration:
stratum+tcp://mmpool.org:3333
<pool user ID>
d=512

Just one was running fine, so added a second.  Rejects increased some over a half hour period.  Added a third and within ten minutes the A/R ratio on the new arrival was 1.8 which is very poor (at about 30min it was 1.4).  Can anything be done to fix this?

PS. Am now dropping back to just two S5 again, restarted both at the same time.  After ~15 minutes their respective A/R ratios are 11.1 and 1.8, I obviously have to drop back to one S5 again.

PPS. I've noticed the rejects don't show up singly, but in bursts.  Looks like a timing problem to me.

PPPS. Thought I'd list the A/R ratios for the six Antminer S3: 519, 535, 586, 626, 421, 266 (am rebooting this last one)

------------------------------------------------------------------------------------------------------------------

Been over an hour now since returning the second two S5 to Eligius.  Vari-diff has set 512 for both and their A/R ratios are: 551 and 1389 -- it's not a miner hardware problem.
 

I was testing with a cube last night (Just solo mining) and got lots of invalids until I upgraded mining proxy. I will give it a whirl on mmpool to see if I notice network issues if you are stil having problems.

[marcetin]

Happy to see UNO finally makes merged mining possible, after plan with DUO fail I was thinking this will never be done.

I'll point my miners to mine UNO merged!

[FallingKnife]

Happy to see UNO finally makes merged mining possible, after plan with DUO fail I was thinking this will never be done.

I'll point my miners to mine UNO merged!

Good to see you here again, Marcetin!  I am testing the merge pools today, presently hashing on mmpool.  It's going well!

[skywave]

I'm using the v0.9.5.0-thermoremnant wallet, and it loads OK - after opening up it is in full sync, but then after a while it starts falling behind about 50-80 blocks and never catches up again. 8 active connections.
Is there a newer version than this one?
I think I've seen some posts mention ver .1?
If so - where can I download that one? The link in the OP for WINDOWS only downloads the 0.9.5.0

[skywave]

-datadir=<myChosenDrive>:\<myChosenFolder>
does not seem to work?
Is there another flag/string which works?